发生错误 详情 隐藏
您有未保存页面 恢复 取消

Prov. Limburg (BE)

  • Capital:No data
  • No data:No data
  • Population, persons:No data
  • Land area, sq.km:No data
  • Population density, persons/sq. km:No data
  • Net migration:No data
  • Rate of natural population change, %:No data
  • Fertility rate, births per woman:No data
  • Official web-site of the region:No data
  • GDP, millons of euro:No data
  • GDP per capita, euro:No data
  • GDP per cap., % of EU average:No data
  • Gross enrolment ratio (all levels of education), %:No data
  • Doctors, per 100,000 inhabitants:No data
  • Employment rate (age 15-64), %:No data
  • Unemployment rate (age 15 or over), %:No data
  • Net disposable income per inhabitant, euro:No data
  • Passenger cars, per 1,000 inhabitants:No data

对比
所有数据集:  A B C D E F G H I K L M N O P R S T U V Y
  • A
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 27 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 27 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 三月 2013
      来源: Eurostat
      上传者: Knoema
      访问日期: 24 十一月, 2013
      选择数据集
      Eurostat Dataset Id:demo_r_mdthrt The regional demographic statistics provides annual data on population, vital events (live births and deaths), total and land areas of the regions and key demographic indicators for regions and statistical regions at NUTS2 and NUTS3 levels for 35 countries: each EU-27 Member State, Acceding, Candidate and EFTA countries. The completeness of the tables depends on the availability of data received from the responsible national statistical institutes (NSIs).  The label of each table indicates the lowest NUTS level for which data are available; for the upper NUTS levels data are included as well. Starting with March 2013, demographic statistics at regional level reflect the new NUTS-2010 classification for EU-27 Member States and the new statistical regions for Croatia. Countries affected by the NUTS-2010 changes are expected to transmit to Eurostat the time series for the new regional breakdown. As a general approach, the regions with no data available are not listed in the tables. For a calendar year T, the deadline of the regional demographic data collection is 15 December, and data included have a different degree of detail for regions at NUTS2 and NUTS3 levels: NUTS2 level - high level of data detail:Population by sex and single year of age at 1st January: years T and T-1Live births by single year of age and year of birth of the mother: year T-1 Deaths by sex and single years of age and year of birth: year T-1  NUTS3 level - low level of data detail:Surface area in km2 at 1st January (total area including inland waters and land area): year TPopulation by sex and broad age groups at 1st January, namely for 0-14 (0 up to 14 years), 15-64 (15 up to 64 years) and 65+ (persons of 65 years and older): years T and T-1 Live births and deaths (total number of demographic events): year T-1  Tables are updated mainly during March of the next year (T+1), but also along the year whenever revised data are sent by the official data providers. Demographic indicators at regional level are computed by Eurostat using a harmonised methodology and common concepts for all regions of all countries, namely:average population on 1st January (in thousands), population density;demographic balance and crude rates (population change, natural change, net migration including statistical adjustments, crude birth rate, crude death rate, crude rate of population change, crude rate of natural change, crude rate of net migration (including statistical adjustments));age-specific-fertility rates and Total Fertility Rates;life tables that include age-specific-mortality-rates and life expectancy at given exact age;infant mortality and crude rate of infant mortality. At national level a larger number of demographic indicators are computed, as more detailed demographic data are collected only at this level.   
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 15 十月, 2019
      选择数据集
      The agricultural land prices and rents methodology intends to collect comparable statistics on the prices and rents of agricultural land for agricultural use in the European Union, as land is a primary resource for agricultural production. The EU enlargements increased the need for data on agricultural land prices and rents. The main uses of these statistics are comparisons among the Member States and their regions and analyses of the trends in agricultural land prices and rents.
    • 三月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 21 四月, 2014
      选择数据集
      Eurostat Dataset Id:tran_r_avgo_om Due to the nature of transport, a spatial reference is built into most legal acts dealing with transport statistics. In a few cases, these sources can be directly used for the derivation of regional transport indicators, while other indicators are collected on a voluntary basis. This is the case of the regional transport data collection in which both data types are used. Three types of regional data can be distinguished depending on their source: two are based on data collections performed on the basis of legal acts (the Maritime and Aviation data) and one is a voluntary data collection (infrastructures, vehicles and road accidents). Regional data collected on voluntary basis: The current regional data collection taking place on a voluntary basis comprises a set of transport indicators at NUTS 0, 1 and 2[1] levels for the road, railways, inland waterways (infrastructure), vehicle stocks, road accidents. The information collected is then disseminated in Eurostat dissemination database (Eurobase) under “General and regional statistics/Regional statistics/Regional transport statistics” theme and also mirrored under “Transport/Regional transport statistics” theme. Annual data collection for infrastructure, vehicle stocks and road accidents was launched at the beginning of 2002 covering both Member States and Candidate countries. Since 2007, it includes EFTA countries as well. Regional data are collected directly from the countries using a questionnaire: data on transport infrastructure, vehicle stocks and road accidents (collected previously – till 2006 – on Excel sheets and then – till 2012- using on-line questionnaires). Currently regional datasets are provided via eDAMIS application. For the voluntary data collection via eDAMIS portal, the definitions from the 4th edition of the Glossary for transport statistics(jointly elaborated by Eurostat, ECMT, UNECE) were proposed and countries should use them when transmitting data. Regional data based on legal acts: For the collection based on legal acts, regional data are actually derived from the information provided by the participating countries in the frame of the legal data collections at port and airport level. Maritime transport data collection is legally based – Directive 2009/42/EC of the European Parliament and of the Council of 6 May 2009 on statistical returns in respect of carriage of goods and passengers by sea (OJ L141 of 6.6.2009, page 29), which is the recast of the original Council Directive 95/64/EC of 8 December 1995. Within the collection Maritime transport - data aggregated at standard regional levels (NUTS) there are two tables:Maritime transport of passengers at regional level (new methodology);Maritime transport of freight at regional level (new methodology).   Within the collection Air transport - data aggregated at standard regional levels (NUTS) there are two tables:Air transport of passengers at regional levelAir transport of freight at regional level   The tables present the evolution of the number of passengers carried (if not available passengers on board) and the volume of freight and mail loaded or unloaded (if not available freight and mail on board) to/from the NUTS regions (level 2, 1 and 0) since 1999. The data is presented at annual level. The air transport regional data have been calculated using data collected at the airport level in the frame of draft Council and Parliament Regulation (Regulation 95/C 325/08 on statistical returns in respect of carriage of passenger, freight and mail by air). [1] Regulation (EC) No 1059/2003 of the European Parliament and of the Council of 26 May 2003 on the establishment of a common classification of territorial units for statistics (NUTS) and its amendments. More information on NUTS clasiffication can be found under the following link.
    • 三月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 21 四月, 2014
      选择数据集
      Eurostat Dataset Id:tran_r_avpa_om Due to the nature of transport, a spatial reference is built into most legal acts dealing with transport statistics. In a few cases, these sources can be directly used for the derivation of regional transport indicators, while other indicators are collected on a voluntary basis. This is the case of the regional transport data collection in which both data types are used. Three types of regional data can be distinguished depending on their source: two are based on data collections performed on the basis of legal acts (the Maritime and Aviation data) and one is a voluntary data collection (infrastructures, vehicles and road accidents). Regional data collected on voluntary basis: The current regional data collection taking place on a voluntary basis comprises a set of transport indicators at NUTS 0, 1 and 2[1] levels for the road, railways, inland waterways (infrastructure), vehicle stocks, road accidents. The information collected is then disseminated in Eurostat dissemination database (Eurobase) under “General and regional statistics/Regional statistics/Regional transport statistics” theme and also mirrored under “Transport/Regional transport statistics” theme. Annual data collection for infrastructure, vehicle stocks and road accidents was launched at the beginning of 2002 covering both Member States and Candidate countries. Since 2007, it includes EFTA countries as well. Regional data are collected directly from the countries using a questionnaire: data on transport infrastructure, vehicle stocks and road accidents (collected previously – till 2006 – on Excel sheets and then – till 2012- using on-line questionnaires). Currently regional datasets are provided via eDAMIS application. For the voluntary data collection via eDAMIS portal, the definitions from the 4th edition of the Glossary for transport statistics(jointly elaborated by Eurostat, ECMT, UNECE) were proposed and countries should use them when transmitting data. Regional data based on legal acts: For the collection based on legal acts, regional data are actually derived from the information provided by the participating countries in the frame of the legal data collections at port and airport level. Maritime transport data collection is legally based – Directive 2009/42/EC of the European Parliament and of the Council of 6 May 2009 on statistical returns in respect of carriage of goods and passengers by sea (OJ L141 of 6.6.2009, page 29), which is the recast of the original Council Directive 95/64/EC of 8 December 1995. Within the collection Maritime transport - data aggregated at standard regional levels (NUTS) there are two tables: Maritime transport of passengers at regional level (new methodology);Maritime transport of freight at regional level (new methodology). Within the collection Air transport - data aggregated at standard regional levels (NUTS) there are two tables: Air transport of passengers at regional levelAir transport of freight at regional level The tables present the evolution of the number of passengers carried (if not available passengers on board) and the volume of freight and mail loaded or unloaded (if not available freight and mail on board) to/from the NUTS regions (level 2, 1 and 0) since 1999. The data is presented at annual level. The air transport regional data have been calculated using data collected at the airport level in the frame of draft Council and Parliament Regulation (Regulation 95/C 325/08 on statistical returns in respect of carriage of passenger, freight and mail by air). [1] Regulation (EC) No 1059/2003 of the European Parliament and of the Council of 26 May 2003 on the establishment of a common classification of territorial units for statistics (NUTS) and its amendments. More information on NUTS clasiffication can be found under the following link.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 三月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, the former Yugoslav Republic of Macedonia, Albania, Iceland, Norway, Liechtenstein and Switzerland. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 三月 2018
      来源: Eurostat
      上传者: Knoema
      访问日期: 17 三月, 2018
      选择数据集
    • 一月 2017
      来源: Eurostat
      上传者: Knoema
      访问日期: 12 四月, 2017
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 一月 2017
      来源: Eurostat
      上传者: Knoema
      访问日期: 12 四月, 2017
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 十一月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 12 十一月, 2019
      选择数据集
      Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements. Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics
    • 十一月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 08 十一月, 2019
      选择数据集
      Livestock numbers are derived from surveys of farms or from administrative sources in November or December for each Member State.
    • 三月 2014
      来源: Eurostat
      上传者: Knoema
      访问日期: 13 四月, 2014
      选择数据集
      Eurostat Dataset Id:demo_r_d3avg The regional demographic statistics provides annual data on population, vital events (live births and deaths), total and land areas of the regions and key demographic indicators for regions and statistical regions at NUTS2 and NUTS3 levels for 35 countries: each EU-27 Member State, Acceding, Candidate and EFTA countries. The completeness of the tables depends on the availability of data received from the responsible national statistical institutes (NSIs).  The label of each table indicates the lowest NUTS level for which data are available; for the upper NUTS levels data are included as well. Starting with March 2013, demographic statistics at regional level reflect the new NUTS-2010 classification for EU-27 Member States and the new statistical regions for Croatia. Countries affected by the NUTS-2010 changes are expected to transmit to Eurostat the time series for the new regional breakdown. As a general approach, the regions with no data available are not listed in the tables. For a calendar year T, the deadline of the regional demographic data collection is 15 December, and data included have a different degree of detail for regions at NUTS2 and NUTS3 levels: NUTS2 level - high level of data detail: Population by sex and single year of age at 1st January: years T and T-1Live births by single year of age and year of birth of the mother: year T-1 Deaths by sex and single years of age and year of birth: year T-1  NUTS3 level - low level of data detail: Surface area in km2 at 1st January (total area including inland waters and land area): year TPopulation by sex and broad age groups at 1st January, namely for 0-14 (0 up to 14 years), 15-64 (15 up to 64 years) and 65+ (persons of 65 years and older): years T and T-1 Live births and deaths (total number of demographic events): year T-1  Tables are updated mainly during March of the next year (T+1), but also along the year whenever revised data are sent by the official data providers. Demographic indicators at regional level are computed by Eurostat using a harmonised methodology and common concepts for all regions of all countries, namely: average population on 1st January (in thousands), population density;demographic balance and crude rates (population change, natural change, net migration including statistical adjustments, crude birth rate, crude death rate, crude rate of population change, crude rate of natural change, crude rate of net migration (including statistical adjustments));age-specific-fertility rates and Total Fertility Rates;life tables that include age-specific-mortality-rates and life expectancy at given exact age;infant mortality and crude rate of infant mortality. At national level a larger number of demographic indicators are computed, as more detailed demographic data are collected only at this level.Â
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 19 三月, 2019
      选择数据集
      Total Surface Area (TSA)  – Total Surface Area is defined as the area of any given statistical area and includes land area and inland waters (lakes, rivers etc.). The sub-national areas (e.g. LAU and NUTS areas) defined by statistical and/or administrative boundaries are the building blocks for calculating both concepts. By definition Total Surface Area does not cover areas that are not statistical areas. Total Land Area (TLA) is defined as TSA excluding lakes, rivers, transitional and coastal waters. Mountainous regions, glaciers, forests, wetlands and other tempoarily or permanently uninhabitable regions are included in TLA. Both TSA and TLA are provided per Member State and for all statistical units from NUTS level 1 to NUTS level 3. TSA and TLA are the denominator in area based indicators, such as population density. Both datasets have the same reference date as the current valid NUTS classification (2013). A more generalised version (scale 1: 1 000 000) of the NUTS areas than used for the calculation of TSA and TLA can be downloaded from the Eurostat website http://ec.europa.eu/eurostat/web/gisco/geodata/reference-data/administrative-units-statistical-units/nuts
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 十月, 2019
      选择数据集
    • 三月 2014
      来源: Eurostat
      上传者: Knoema
      访问日期: 13 四月, 2014
      选择数据集
      Eurostat Dataset Id:agr_r_crops
    • 十一月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 10 十一月, 2019
      选择数据集
      Accommodation statistics are a key part of the system of tourism statistics in the EU and have a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases data are compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 三月, 2019
      选择数据集
      Non-expenditure health care data provide information on institutions providing health care in countries, on resources used and on output produced in the framework of health care provision. Data on health care form a major element of public health information as they describe the capacities available for different types of health care provision as well as potential 'bottlenecks' observed. The quantity and quality of health care services provided and the work sharing established between the different institutions are a subject of ongoing debate in all countries. Sustainability - continuously providing the necessary monetary and personal resources needed - and meeting the challenges of ageing societies are the primary perspectives used when analysing and using the data. The resource-related data refer to both human and technical resources, i.e. they relate to: - 'Health care staff': 'manpower' active in the health care sector (doctors, dentists, nurses, etc.); - 'Health care facilities': technical capacity dimensions (hospital beds, beds in nursing and residential care facilities, etc.). Annual national and regional data are provided in absolute numbers and in population-standardised rates (per 100 000 inhabitants). Wherever applicable, the definitions and classifications of the System of Health Accounts (SHA) are followed, e.g. International Classification for Health Accounts - Providers of health care (ICHA-HP). For hospital discharges, the International Shortlist for Hospital Morbidity Tabulation (ISHMT) is used. Health care data on resources are largely based on administrative data sources in the countries. Therefore, they reflect the country-specific way of organising health care and may not always be completely comparable.
    • 八月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 28 八月, 2019
      选择数据集
      Total hospital beds are all hospital beds which are regularly maintained and staffed and immediately available for the care of admitted patients.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 07 九月, 2019
      选择数据集
      Regional accounts are a regional specification of the national accounts and therefore based on the same concepts and definitions as national accounts (see domain nama10). The main specific regional issues are addressed in chapter 13 of ESA2010, but not practically specified. For practical rules and recommendations on sources and methods see the publication "Manual on regional accounts methods": http://ec.europa.eu/eurostat/en/web/products-manuals-and-guidelines/-/KS-GQ-13-001 . Gross domestic product (GDP) at market prices is the final result of the production activity of resident producer units. It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expenditure approach cannot be used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees plus gross operating surplus and mixed income plus taxes on products less subsidies plus consumption of fixed capital. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU28 average.
    • 三月 2014
      来源: Eurostat
      上传者: Knoema
      访问日期: 14 四月, 2014
      选择数据集
      Eurostat Dataset Id:nama_r_e3popgdp National accounts are a coherent and consistent set of macroeconomic indicators, which provide an overall picture of the economic situation and are widely used for economic analysis and forecasting, policy design and policy making. Eurostat publishes annual and quarterly national accounts, annual and quarterly sector accounts as well as supply, use and input-output tables, which are each presented with associated metadata. Annual national accounts are compiled in accordance with the European System of Accounts - ESA 1995 (Council Regulation 2223/96). Annex B of the Regulation consists of a comprehensive list of the variables to be transmitted for Community purposes within specified time limits. This transmission programme has been updated by Regulation (EC) N° 1392/2007 of the European Parliament and of the Council. Meanwhile, the ESA95 has been reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. Further information on the transition from ESA 95 to ESA 2010 is presented on the Eurostat website. The domain consists of the following collections: GDP and main aggregates. The data are recorded at current and constant prices and include the corresponding implicit price indices. Final consumption aggregates, including the split into household and government consumption. The data are recorded at current and constant prices and include the corresponding implicit price indices. Income, saving and net lending / net borrowing at current prices. Disposable income is also shown in real terms. Exports and imports by Member States of the EU/third countries. The data are recorded at current and constant prices and include the corresponding implicit price indices. Breakdowns of gross value added, compensation of employees, wages and salaries, operating surplus, employment (domestic scope), gross fixed capital formation (GFCF) and fixed assets and other main aggregates by industry; investment by products and household final consumption expenditure by consumption purposes (COICOP). The data are recorded at current and constant prices and include the corresponding implicit price indices. Auxiliary indicators: Population and employment national data, purchasing power parities, contributions to GDP growth, labour productivity, unit labour cost and GDP per capita. Geographical entities covered are the European Union, the euro area, EU Member States, Candidate Countries, EFTA countries, US, Japan and possibly other countries on an ad-hoc basis. The data are published: - in ECU/euro, in national currencies (including euro converted from former national currencies using the irrevocably fixed rate for all years) and in Purchasing Power Standards (PPS); - at current prices and in volume terms; - Population and employment are measured in persons. Employment is also measured in total hours worked. Data sources: National Statistical Institutes
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 30 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
  • B
    • 十二月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 四月, 2014
      选择数据集
      Eurostat Dataset Id:migr_r_2be The data comprises series of internal (in the country) regional migration on NUTS2 level during the reference year. Data on arrivals and departures due to internal migration are disaggregated by NUTS2 region of arrival/departure, sex and single year age. Data on migration by region of origin and destination (excluding intra-regional migration) are presented separately for each country for which such data are available. The tables are in the form of matrix (NUTS2 region of origin and destination) excluding intra-refional migration, disaggregated by sex. The data source is administrative records or national surveys. The completeness of the tables depends largely on the availability of data from the relevant national statistical institutes.
    • 四月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 10 五月, 2016
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 九月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
  • C
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 九月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, Iceland, Norway, Liechtenstein, Switzerland, Serbia and Turkey. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 九月, 2019
      选择数据集
    • 八月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 八月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, the former Yugoslav Republic of Macedonia, Albania, Iceland, Norway, Liechtenstein and Switzerland. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 八月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 17 八月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, Iceland, Norway, Liechtenstein, Switzerland, Serbia and Turkey. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 八月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 04 八月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, Iceland, Norway, Liechtenstein, Switzerland, Serbia and Turkey. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 九月, 2019
      选择数据集
    • 八月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 03 八月, 2019
      选择数据集
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 05 六月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, Iceland, Norway, Liechtenstein, Switzerland, Serbia and Turkey. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 一月 2014
      来源: Eurostat
      上传者: Knoema
      访问日期: 16 五月, 2014
      选择数据集
      Eurostat Dataset Id:hlth_cd_ynrf Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, and cause of death. Data are available for EU-28, the former Yugoslav Republic of Macedonia, Albania, Iceland, Norway, Liechtenstein and Switzerland. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 04 六月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, Iceland, Norway, Liechtenstein, Switzerland, Serbia and Turkey. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 一月 2014
      来源: Eurostat
      上传者: Knoema
      访问日期: 16 五月, 2014
      选择数据集
      Eurostat Dataset Id:hlth_cd_ynrm Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, and cause of death. Data are available for EU-28, the former Yugoslav Republic of Macedonia, Albania, Iceland, Norway, Liechtenstein and Switzerland. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 04 六月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, Iceland, Norway, Liechtenstein, Switzerland, Serbia and Turkey. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 一月 2014
      来源: Eurostat
      上传者: Knoema
      访问日期: 16 五月, 2014
      选择数据集
      Eurostat Dataset Id:hlth_cd_ynrt Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, and cause of death. Data are available for EU-28, the former Yugoslav Republic of Macedonia, Albania, Iceland, Norway, Liechtenstein and Switzerland. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 六月 2013
      来源: Eurostat
      上传者: Knoema
      访问日期: 21 八月, 2013
      选择数据集
      Notes: Eurostat Hierarchy: General and regional statistics > Population and social conditions > Health (health) > Public health (hlth) > Causes of death (hlth_cdeath).
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 29 九月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, the former Yugoslav Republic of Macedonia, Albania, Iceland, Norway, Liechtenstein and Switzerland. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 19 四月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, Iceland, Norway, Liechtenstein, Switzerland, Serbia and Turkey. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 12 四月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, Iceland, Norway, Liechtenstein, Switzerland, Serbia and Turkey. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 四月 2014
      来源: Eurostat
      上传者: Knoema
      访问日期: 16 五月, 2014
      选择数据集
      Eurostat Dataset Id:hlth_cd_ycdrt Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, and cause of death. Data are available for EU-28, the former Yugoslav Republic of Macedonia, Albania, Iceland, Norway, Liechtenstein and Switzerland. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 04 六月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, Iceland, Norway, Liechtenstein, Switzerland, Serbia and Turkey. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 四月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, Iceland, Norway, Liechtenstein, Switzerland, Serbia and Turkey. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 九月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 十二月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 29 十二月, 2016
      选择数据集
    • 十二月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 08 四月, 2017
      选择数据集
    • 十二月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 28 三月, 2017
      选择数据集
      Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Designs constitute means by which creators seek protection for their industrial property. Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Design data can provide a link between innovation and the market. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Designs. Community Designs refer to design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (EUIPO) is the official office of the European Union for the registration of Community Trade marks and Designs. A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: EUIPO).
    • 十二月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 29 十二月, 2016
      选择数据集
    • 十二月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 28 三月, 2017
      选择数据集
      Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Designs constitute means by which creators seek protection for their industrial property. Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Design data can provide a link between innovation and the market. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Designs. Community Designs refer to design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (EUIPO) is the official office of the European Union for the registration of Community Trade marks and Designs. A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: EUIPO).
    • 十二月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 28 三月, 2017
      选择数据集
      Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Designs constitute means by which creators seek protection for their industrial property. Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Design data can provide a link between innovation and the market. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Designs. Community Designs refer to design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (EUIPO) is the official office of the European Union for the registration of Community Trade marks and Designs. A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: EUIPO).
    • 十二月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 29 十二月, 2016
      选择数据集
    • 十二月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 29 十二月, 2016
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 九月, 2019
      选择数据集
      Regional accounts are a regional specification of the national accounts and therefore based on the same concepts and definitions as national accounts (see domain nama10). The main specific regional issues are addressed in chapter 13 of ESA2010, but not practically specified. For practical rules and recommendations on sources and methods see the publication "Manual on regional accounts methods": http://ec.europa.eu/eurostat/en/web/products-manuals-and-guidelines/-/KS-GQ-13-001 . Gross domestic product (GDP) at market prices is the final result of the production activity of resident producer units. It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expenditure approach cannot be used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees plus gross operating surplus and mixed income plus taxes on products less subsidies plus consumption of fixed capital. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU28 average.
    • 二月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 八月, 2015
      选择数据集
    • 四月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 29 十二月, 2015
      选择数据集
      The 2011 Population and Housing Census marks a milestone in census exercises in Europe. For the first time, European legislation defined in detail a set of harmonised high-quality data from the population and housing censuses conducted in the EU Member States. As a result, the data from the 2011 round of censuses offer exceptional flexibility to cross-tabulate different variables and to provide geographically detailed data. EU Member States have developed different methods to produce these census data.  The national differences reflect the specific national situations in terms of data source availability, as well as the administrative practices and traditions of that country. The EU census legislation respects this diversity. The Regulation of the European Parliament and of the Council on population and housing censuses (Regulation (EC) No 763/2008) is focussed on output harmonisation rather than input harmonisation. Member States are free to assess for themselves how to conduct their 2011 censuses and which data sources, methods and technology should be applied given the national context. This gives the Member States flexibility, in line with the principles of subsidiarity and efficiency, and with the competences of the statistical institutes in the Member States. However, certain important conditions must be met in order to achieve the objective of comparability of census data from different Member States and to assess the data quality: Regulation (EC) No 1201/20092 contains definitions and technical specifications for the census topics (variables) and their breakdowns that are required to achieve Europe-wide comparability. The specifications are based closely on international recommendations and have been designed to provide the best possible information value. The census topics include geographic, demographic, economic and educational characteristics of persons, international and internal migration characteristics as well as household, family and housing characteristics. Regulation (EU) No 519/2010 requires the data outputs that Member States transmit to the Eurostat to comply with a defined programme of statistical data (tabulation) and with set rules concerning the replacement of statistical data. The content of the EU census programme serves major policy needs of the European Union. Regionally, there is a strong focus on the NUTS 2 level. The data requirements are adapted to the level of regional detail. The Regulation does not require transmission of any data that the Member States consider to be confidential. The statistical data must be completed by metadata that will facilitate interpretation of the numerical data, including country-specific definitions plus information on the data sources and on methodological issues. This is necessary in order to achieve the transparency that is a condition for valid interpretation of the data. Users of output-harmonised census data from the EU Member States need to have detailed information on the quality of the censuses and their results. Regulation (EU) No 1151/2010) therefore requires transmission of a quality report containing a systematic description of the data sources used for census purposes in the Member States and of the quality of the census results produced from these sources. A comparably structured quality report for all EU Member States will support the exchange of experience from the 2011 round and become a reference for future development of census methodology (EU legislation on the 2011 Population and Housing Censuses - Explanatory Notes ). In order to ensure proper transmission of the data and metadata and provide user-friendly access to this information, a common technical format is set for transmission for all Member States and for the Commission (Eurostat). The Regulation therefore requires the data to be transmitted in a harmonised structure and in the internationally established SDMX format from every Member State. In order to achieve this harmonised transmission, a new system has been developed – the CENSUS HUB. The Census Hub is a conceptually new system used for the dissemination of the 2011 Census. It is based on the concept of data sharing, where a group of partners (Eurostat on one hand and National Statistical Institutes on the other) agree to provide access to their data according to standard processes, formats and technologies. The Census Hub is a readily-accessible system that provided the following functions: • Data providers (the NSIs) can make data available directly from their systems through a querying system. In parallel, • Data users browse the hub to define a dataset of interest via the above structural metadata and retrieve the dataset from the NSIs. From the data management point of view, the hub is based on agreed hypercubes (data-sets in the form of multi-dimensional aggregations). The hypercubes are not sent to the central system. Instead the following process operates: 1. a user defines a dataset through the web interface of the central hub and requests it; 2. the central hub translates the user request in one or more queries and sends them to the related NSIs’ systems; 3. NSIs’ systems process the query and send the result to the central hub in a standard format; 4. the central hub puts together all the results sent by the NSI systems and presents them in a user-specified format.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 19 三月, 2019
      选择数据集
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 27 三月, 2019
      选择数据集
    • 一月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 21 一月, 2016
      选择数据集
    • 九月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 03 十二月, 2015
      选择数据集
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 09 五月, 2019
      选择数据集
      Crop statistics refer to the following types of annual data: area under cultivation, harvested production, yield,  humidity and main area for cereals and for other main field crops (mainly dried pulses, root crops, fodder and industrial crops);harvested area, harvested production and main area for vegetables ;production area, harvested production and main area for permanent crop.The data are provided at national level. For some products regional figures (NUTS 1 or 2) are available too. The areas  are expressed in 1 000 hectares,  the harvested quantities in 1 000 tonnes and the yields in t/ha. The production and yield data are available in EU standard humidity (apro_cpsh) and in national humidity (apro_cpnh). The information concerns more than 100 crop products. The earliest data are available from 1955 for cereals and from the early 1960's for fruits and vegetables. However, most Member States have started to send in data in the 1970's and 1980's. The statistical system has progressively improved and enlarged. The current Regulation (EC) No 543/2009 entered into force in January 2010. The annex was updated in 2015 through a Commission Delegated Regulation (EU) No 2015/1557. At present Eurostat receives and publishes harmonised statistical data from 28 Member States, form the EFTA countries and from the candidate and potential candidate countries broken down in: 17 categories and subcategories for cereals;29 categories and  subcategories for other main crops (mainly dry pulses and protein crops, root crops industrial crops and plants harvested green from arable land);40 categories and subcategories for vegetables;41 categories and subcategories for permanent crops;18 categories and subcategories for the Utilised Agricultural Area (UAA). For the full list of crops, please consult Annex. Some additional crops and transmission deadlines are covered by an ESS agreement on annual crop statistics. The main data sources are administrative records, surveys and expert estimates. National Statistical Institutes or Ministries of Agriculture are responsible for the national data collection in accordance with the Regulations and agreements in force. Eurostat is responsible for drawing the EU aggregations. Regional metadata Please note that for paragraphs where no metadata for regional data has been specified the regional metadata is identical to the metadata for the national data.
    • 十一月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 13 十一月, 2019
      选择数据集
      Crop statistics refer to the following types of annual data: area under cultivation, harvested production, yield,  humidity and main area for cereals and for other main field crops (mainly dried pulses, root crops, fodder and industrial crops);harvested area, harvested production and main area for vegetables ;production area, harvested production and main area for permanent crop.The data are provided at national level. For some products regional figures (NUTS 1 or 2) are available too. The areas  are expressed in 1 000 hectares,  the harvested quantities in 1 000 tonnes and the yields in t/ha. The production and yield data are available in EU standard humidity (apro_cpsh) and in national humidity (apro_cpnh). The information concerns more than 100 crop products. The earliest data are available from 1955 for cereals and from the early 1960's for fruits and vegetables. However, most Member States have started to send in data in the 1970's and 1980's. The statistical system has progressively improved and enlarged. The current Regulation (EC) No 543/2009 entered into force in January 2010. The annex was updated in 2015 through a Commission Delegated Regulation (EU) No 2015/1557. At present Eurostat receives and publishes harmonised statistical data from 28 Member States, form the EFTA countries and from the candidate and potential candidate countries broken down in: 17 categories and subcategories for cereals;29 categories and  subcategories for other main crops (mainly dry pulses and protein crops, root crops industrial crops and plants harvested green from arable land);40 categories and subcategories for vegetables;41 categories and subcategories for permanent crops;18 categories and subcategories for the Utilised Agricultural Area (UAA). For the full list of crops, please consult Annex. Some additional crops and transmission deadlines are covered by an ESS agreement on annual crop statistics. The main data sources are administrative records, surveys and expert estimates. National Statistical Institutes or Ministries of Agriculture are responsible for the national data collection in accordance with the Regulations and agreements in force. Eurostat is responsible for drawing the EU aggregations. Regional metadata Please note that for paragraphs where no metadata for regional data has been specified the regional metadata is identical to the metadata for the national data.
    • 十一月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 13 十一月, 2019
      选择数据集
      Crop statistics refer to the following types of annual data: area under cultivation, harvested production, yield,  humidity and main area for cereals and for other main field crops (mainly dried pulses, root crops, fodder and industrial crops);harvested area, harvested production and main area for vegetables ;production area, harvested production and main area for permanent crop.The data are provided at national level. For some products regional figures (NUTS 1 or 2) are available too. The areas  are expressed in 1 000 hectares,  the harvested quantities in 1 000 tonnes and the yields in t/ha. The production and yield data are available in EU standard humidity (apro_cpsh) and in national humidity (apro_cpnh). The information concerns more than 100 crop products. The earliest data are available from 1955 for cereals and from the early 1960's for fruits and vegetables. However, most Member States have started to send in data in the 1970's and 1980's. The statistical system has progressively improved and enlarged. The current Regulation (EC) No 543/2009 entered into force in January 2010. The annex was updated in 2015 through a Commission Delegated Regulation (EU) No 2015/1557. At present Eurostat receives and publishes harmonised statistical data from 28 Member States, form the EFTA countries and from the candidate and potential candidate countries broken down in: 17 categories and subcategories for cereals;29 categories and  subcategories for other main crops (mainly dry pulses and protein crops, root crops industrial crops and plants harvested green from arable land);40 categories and subcategories for vegetables;41 categories and subcategories for permanent crops;18 categories and subcategories for the Utilised Agricultural Area (UAA). For the full list of crops, please consult Annex. Some additional crops and transmission deadlines are covered by an ESS agreement on annual crop statistics. The main data sources are administrative records, surveys and expert estimates. National Statistical Institutes or Ministries of Agriculture are responsible for the national data collection in accordance with the Regulations and agreements in force. Eurostat is responsible for drawing the EU aggregations. Regional metadata Please note that for paragraphs where no metadata for regional data has been specified the regional metadata is identical to the metadata for the national data.
    • 二月 2017
      来源: Eurostat
      上传者: Knoema
      访问日期: 06 二月, 2017
      选择数据集
    • 二月 2018
      来源: Eurostat
      上传者: Knoema
      访问日期: 21 二月, 2018
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 九月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
  • D
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 三月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, the former Yugoslav Republic of Macedonia, Albania, Iceland, Norway, Liechtenstein and Switzerland. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 三月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, the former Yugoslav Republic of Macedonia, Albania, Iceland, Norway, Liechtenstein and Switzerland. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 三月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, the former Yugoslav Republic of Macedonia, Albania, Iceland, Norway, Liechtenstein and Switzerland. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 三月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, the former Yugoslav Republic of Macedonia, Albania, Iceland, Norway, Liechtenstein and Switzerland. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 十月, 2019
      选择数据集
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 25 十月, 2019
      选择数据集
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 17 五月, 2019
      选择数据集
    • 五月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 五月, 2019
      选择数据集
      "Death" means the permanent disappearance of all evidence of life at any time after live birth has taken place (post-natal cessation of vital functions without capability of resuscitation).
    • 八月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 28 八月, 2019
      选择数据集
      Non-expenditure health care data provide information on institutions providing health care in countries, on resources used and on output produced in the framework of health care provision. Data on health care form a major element of public health information as they describe the capacities available for different types of health care provision as well as potential 'bottlenecks' observed. The quantity and quality of health care services provided and the work sharing established between the different institutions are a subject of ongoing debate in all countries. Sustainability - continuously providing the necessary monetary and personal resources needed - and meeting the challenges of ageing societies are the primary perspectives used when analysing and using the data. The resource-related data refer to both human and technical resources, i.e. they relate to: - Health care staff: 'manpower' active in the health care sector (doctors, dentists, nurses, etc.); - Heath workforce migration: migration movements of doctors and nurses; - Health care facilities: technical capacity dimensions (hospital beds, beds in nursing and residential care facilities, etc.). Annual national and regional data are provided in absolute numbers and in population-standardised rates (per 100 000 inhabitants). Wherever applicable, the definitions and classifications of the System of Health Accounts (SHA) are followed, e.g. International Classification for Health Accounts - Providers of health care (ICHA-HP). For hospital discharges, the International Shortlist for Hospital Morbidity Tabulation (ISHMT) is used. Health care data on resources are largely based on administrative data sources in the countries. Therefore, they reflect the country-specific way of organising health care and may not always be completely comparable.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 27 九月, 2019
      选择数据集
      Regional accounts are a regional specification of the national accounts and therefore based on the same concepts and definitions as national accounts (see domain nama10). The main specific regional issues are addressed in chapter 13 of ESA2010, but not practically specified. For practical rules and recommendations on sources and methods see the publication "Manual on regional accounts methods": http://ec.europa.eu/eurostat/en/web/products-manuals-and-guidelines/-/KS-GQ-13-001 . Gross domestic product (GDP) at market prices is the final result of the production activity of resident producer units. It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expenditure approach cannot be used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees plus gross operating surplus and mixed income plus taxes on products less subsidies plus consumption of fixed capital. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU Member States average.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 05 九月, 2019
      选择数据集
      The aim of this section is to provide comparable statistics and indicators on education in the 27 Member States of the European Union, at the regional level NUTS 2. In order to facilitate comparison between countries, data from each Member State are allocated to the various education levels of the International Standard Classification of Education (ISCED), UNESCO 1997.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 九月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
  • E
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 11 十月, 2019
      选择数据集
      The aim of this section is to provide comparable statistics and indicators on education in the 27 Member States of the European Union, at the regional level NUTS 2. In order to facilitate comparison between countries, data from each Member State are allocated to the various education levels of the International Standard Classification of Education (ISCED), UNESCO 1997.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 17 五月, 2019
      选择数据集
      The Economic Accounts for Agriculture (EAA) provide detailed information on income in the agricultural sector. The purpose is to analyse the production process of the agricultural industry and the primary income generated by this production. The accounts are therefore based on the industry concept. The EAA are detailed data on the value of output (measured in both producer prices and basic prices), intermediate consumption, subsidies and taxes, consumption of fixed capital, rent and interest, capital formation etc. The values are available in both current prices and constant prices. Agricultural Labour Input (ALI) statistics and Unit Values (UV) are an integrated part of the overall concept of the EAA. The EAA are a satellite account of the European System of Accounts (ESA), providing complementary information and concepts adapted to the particular nature of the agricultural industry. Although their structure very closely matches that of the national accounts, their compilation requires the formulation of appropriate rules and methods. National Statistical Institutes or Ministries of Agriculture are responsible for data collection and calculations of national EAA, in accordance with EC Regulations. Eurostat is responsible for the EU aggregations. Regional data The EAA are also compiled at regional level (NUTS2), but only in values at current prices. The agricultural labour input data and unit values, however, are not available at regional levels. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for national data. Frequency of data collection for data under Regulation (EC) 138/2004 and gentlemen's agreement l
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 30 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 30 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 30 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 19 三月, 2019
      选择数据集
      Eurostat Dataset Id:educ_regind The aim of this section is to provide comparable statistics and indicators on education in the 27 Member States of the European Union, at the regional level NUTS 2. In order to facilitate comparison between countries, data from each Member State are allocated to the various education levels of the International Standard Classification of Education (ISCED), UNESCO 1997.
    • 二月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 八月, 2015
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 九月, 2019
      选择数据集
      Regional accounts are a regional specification of the national accounts and therefore based on the same concepts and definitions as national accounts (see domain nama10). The main specific regional issues are addressed in chapter 13 of ESA2010, but not practically specified. For practical rules and recommendations on sources and methods see the publication "Manual on regional accounts methods": http://ec.europa.eu/eurostat/en/web/products-manuals-and-guidelines/-/KS-GQ-13-001 . Gross domestic product (GDP) at market prices is the final result of the production activity of resident producer units. It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expenditure approach cannot be used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees plus gross operating surplus and mixed income plus taxes on products less subsidies plus consumption of fixed capital. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU28 average.
    • 十一月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 17 十一月, 2019
      选择数据集
      Regional accounts are a regional specification of the national accounts and therefore based on the same concepts and definitions as national accounts (see domain nama10). The main specific regional issues are addressed in chapter 13 of ESA2010, but not practically specified. For practical rules and recommendations on sources and methods see the publication "Manual on regional accounts methods": http://ec.europa.eu/eurostat/en/web/products-manuals-and-guidelines/-/KS-GQ-13-001 . Gross domestic product (GDP) at market prices is the final result of the production activity of resident producer units. It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expenditure approach cannot be used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees plus gross operating surplus and mixed income plus taxes on products less subsidies plus consumption of fixed capital. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU28 average.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 八月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 13 八月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 30 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 30 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 30 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 30 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 30 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 27 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU-LFS (Statistics Explained) webpage. The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However, many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation by territorial typologies, i.e. urban-rural, metropolitan, coastal, mountain, borders and island typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 十月, 2019
      选择数据集
      The data shows the employment in high-tech sectors (code HTC) as a percentage of total employment. The data are aggregated according to the sectoral approach at NACE Rev.2 on 2-digit level and is oriented on the ratio of highly qualified working in these areas.
    • 八月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 13 八月, 2019
      选择数据集
      'Statistics on high-tech industry and knowledge-intensive services' (sometimes referred to as simply 'high-tech statistics') comprise economic, employment and science, technology and innovation (STI) data describing manufacturing and services industries or products traded broken down by technological intensity. The domain uses various other domains and sources of  Eurostat's official statistics (CIS, COMEXT, HRST, LFS, PATENT, R&D and SBS) and its coverage is therefore dependent on these other primary sources. Two main approaches are used in the domain to identify technology-intensity: the sectoral approach and the product approach. A third approach is used for data on high-tech and biotechnology patents aggregated on the basis of the International Patent Classification (IPC) 8th edition (see summary table in Annex 1 for which approach is used by each type of data). The sectoral approach: The sectoral approach is an aggregation of the manufacturing industries according to technological intensity (R&D expenditure/value added) and based on the Statistical classification of economic activities in the European Community (NACE) at 2-digit level. The level of R&D intensity served as a criterion of classification of economic sectors into high-technology, medium high-technology, medium low-technology and low-technology industries. Services are mainly aggregated into knowledge-intensive services (KIS) and less knowledge-intensive services (LKIS) based on the share of tertiary educated persons at NACE 2-digit level. The sectoral approach is used for all indicators except data on high-tech trade and patents. Note that due to the revision of the NACE from NACE Rev. 1.1 to NACE Rev. 2 the definition of high-technology industries and knowledge-intensive services has changed in 2008. For high-tech statistics it means that two different definitions (one according NACE Rev. 1.1 and one according NACE Rev. 2) are used in parallel and the data according to both NACE versions are presented in separated tables depending on the data availability. For example as the LFS provides the results both by NACE Rev. 1.1 and NACE Rev. 2, all the table using this source have been duplicated to present the results by NACE Rev. 2 from 2008. For more details, see both definitions of high-tech sectors in Annex 2 and 3. Within the sectoral approach, a second classification was created, named Knowledge Intensive Activities KIA) and based on the share of tertiary educated people in each sectors of industries and services according to NACE at 2-digit level and for all EU28 Member States. A threshold was applied to judge sectors as knowledge intensive. In contrast to first sectoral approach mixing two methodologies, one for manufacturing industries and one for services, the KIA classification is based on one methodology for all the sectors of industries and services covering even public sector activities. The aggregations in use are Total Knowledge Intensive Activities (KIA) and Knowledge Intensive Activities in Business Industries (KIABI). Both classifications are made according to NACE Rev. 1.1 and NACE Rev. 2 at 2- digit level. Note that due to revision of the NACE Rev.1.1 to NACE Rev. 2 the list of Knowledge Intensive Activities has changed as well, the two definitions are used in parallel and the data are shown in two separate tables. NACE Rev.2 collection includes data starting from 2008 reference year. For more details please see the definitions in Annex 7 and 8. The product approach: The product approach was created to complement the sectoral approach and it is used for data on high-tech trade. The product list is based on the calculations of R&D intensity by groups of products (R&D expenditure/total sales). The groups classified as high-technology products are aggregated on the basis of the Standard International Trade Classification (SITC). The initial definition was built based on SITC Rev.3 and served to compile the high-tech product aggregates until 2007. With the implementation in 2007 of the new version of SITC Rev.4, the definition of high-tech groups was revised and adapted according to new classification. Starting from 2007 the Eurostat presents the trade data for high-tech groups aggregated based on the SITC Rev.4. For more details, see definition of high-tech products in Annex 4 and 5. High-tech patents: High-tech patentsare defined according to another approach. The groups classified as high-tech patents are aggregated on the basis of the International Patent Classification (IPC 8th edition). Biotechnology patents are also aggregated on the basis of the IPC 8th edition. For more details, see the aggregation list of high-tech and biotechnology patents in Annex 6. The high-tech domain also comprises the sub-domain Venture Capital Investments: data are provided by INVEST Europe (formerly named the European Private Equity and Venture Capital Association EVCA). More details are available in the Eurostat metadata under Venture capital investments. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 30 十月, 2019
      选择数据集
      'Statistics on high-tech industry and knowledge-intensive services' (sometimes referred to as simply 'high-tech statistics') comprise economic, employment and science, technology and innovation (STI) data describing manufacturing and services industries or products traded broken down by technological intensity. The domain uses various other domains and sources of  Eurostat's official statistics (CIS, COMEXT, HRST, LFS, PATENT, R&D and SBS) and its coverage is therefore dependent on these other primary sources. Two main approaches are used in the domain to identify technology-intensity: the sectoral approach and the product approach. A third approach is used for data on high-tech and biotechnology patents aggregated on the basis of the International Patent Classification (IPC) 8th edition (see summary table in Annex 1 for which approach is used by each type of data). The sectoral approach: The sectoral approach is an aggregation of the manufacturing industries according to technological intensity (R&D expenditure/value added) and based on the Statistical classification of economic activities in the European Community (NACE) at 2-digit level. The level of R&D intensity served as a criterion of classification of economic sectors into high-technology, medium high-technology, medium low-technology and low-technology industries. Services are mainly aggregated into knowledge-intensive services (KIS) and less knowledge-intensive services (LKIS) based on the share of tertiary educated persons at NACE 2-digit level. The sectoral approach is used for all indicators except data on high-tech trade and patents. Note that due to the revision of the NACE from NACE Rev. 1.1 to NACE Rev. 2 the definition of high-technology industries and knowledge-intensive services has changed in 2008. For high-tech statistics it means that two different definitions (one according NACE Rev. 1.1 and one according NACE Rev. 2) are used in parallel and the data according to both NACE versions are presented in separated tables depending on the data availability. For example as the LFS provides the results both by NACE Rev. 1.1 and NACE Rev. 2, all the table using this source have been duplicated to present the results by NACE Rev. 2 from 2008. For more details, see both definitions of high-tech sectors in Annex 2 and 3. Within the sectoral approach, a second classification was created, named Knowledge Intensive Activities KIA) and based on the share of tertiary educated people in each sectors of industries and services according to NACE at 2-digit level and for all EU28 Member States. A threshold was applied to judge sectors as knowledge intensive. In contrast to first sectoral approach mixing two methodologies, one for manufacturing industries and one for services, the KIA classification is based on one methodology for all the sectors of industries and services covering even public sector activities. The aggregations in use are Total Knowledge Intensive Activities (KIA) and Knowledge Intensive Activities in Business Industries (KIABI). Both classifications are made according to NACE Rev. 1.1 and NACE Rev. 2 at 2- digit level. Note that due to revision of the NACE Rev.1.1 to NACE Rev. 2 the list of Knowledge Intensive Activities has changed as well, the two definitions are used in parallel and the data are shown in two separate tables. NACE Rev.2 collection includes data starting from 2008 reference year. For more details please see the definitions in Annex 7 and 8. The product approach: The product approach was created to complement the sectoral approach and it is used for data on high-tech trade. The product list is based on the calculations of R&D intensity by groups of products (R&D expenditure/total sales). The groups classified as high-technology products are aggregated on the basis of the Standard International Trade Classification (SITC). The initial definition was built based on SITC Rev.3 and served to compile the high-tech product aggregates until 2007. With the implementation in 2007 of the new version of SITC Rev.4, the definition of high-tech groups was revised and adapted according to new classification. Starting from 2007 the Eurostat presents the trade data for high-tech groups aggregated based on the SITC Rev.4. For more details, see definition of high-tech products in Annex 4 and 5. High-tech patents: High-tech patentsare defined according to another approach. The groups classified as high-tech patents are aggregated on the basis of the International Patent Classification (IPC 8th edition). Biotechnology patents are also aggregated on the basis of the IPC 8th edition. For more details, see the aggregation list of high-tech and biotechnology patents in Annex 6. The high-tech domain also comprises the sub-domain Venture Capital Investments: data are provided by INVEST Europe (formerly named the European Private Equity and Venture Capital Association EVCA). More details are available in the Eurostat metadata under Venture capital investments. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 30 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 27 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 27 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 20 十月, 2019
      选择数据集
      The aim of this section is to provide comparable statistics and indicators on education in the 27 Member States of the European Union, at the regional level NUTS 2. In order to facilitate comparison between countries, data from each Member State are allocated to the various education levels of the International Standard Classification of Education (ISCED), UNESCO 1997.
    • 十二月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 28 三月, 2017
      选择数据集
      Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trade marks constitute means by which creators seek protection for their industrial property. Trade marks reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trade mark data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of Trade marks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. This domain provides users with data concerning European Union Trade marks. European Union Trade marks refer to trade mark protections throughout the European Union, which covers 28 countries. The European Union Intellectual Property Office (EUIPO) is the official office of the European Union for the registration of European Union Trade marks and Designs. A European Union Trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with EUIPO in Alicante in accordance with the conditions specified in the EUTM Regulations (Source: EUIPO).
    • 十二月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 08 四月, 2017
      选择数据集
  • F
    • 四月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 29 十二月, 2015
      选择数据集
      The 2011 Population and Housing Census marks a milestone in census exercises in Europe. For the first time, European legislation defined in detail a set of harmonised high-quality data from the population and housing censuses conducted in the EU Member States. As a result, the data from the 2011 round of censuses offer exceptional flexibility to cross-tabulate different variables and to provide geographically detailed data. EU Member States have developed different methods to produce these census data.  The national differences reflect the specific national situations in terms of data source availability, as well as the administrative practices and traditions of that country. The EU census legislation respects this diversity. The Regulation of the European Parliament and of the Council on population and housing censuses (Regulation (EC) No 763/2008) is focussed on output harmonisation rather than input harmonisation. Member States are free to assess for themselves how to conduct their 2011 censuses and which data sources, methods and technology should be applied given the national context. This gives the Member States flexibility, in line with the principles of subsidiarity and efficiency, and with the competences of the statistical institutes in the Member States. However, certain important conditions must be met in order to achieve the objective of comparability of census data from different Member States and to assess the data quality: Regulation (EC) No 1201/20092 contains definitions and technical specifications for the census topics (variables) and their breakdowns that are required to achieve Europe-wide comparability. The specifications are based closely on international recommendations and have been designed to provide the best possible information value. The census topics include geographic, demographic, economic and educational characteristics of persons, international and internal migration characteristics as well as household, family and housing characteristics. Regulation (EU) No 519/2010 requires the data outputs that Member States transmit to the Eurostat to comply with a defined programme of statistical data (tabulation) and with set rules concerning the replacement of statistical data. The content of the EU census programme serves major policy needs of the European Union. Regionally, there is a strong focus on the NUTS 2 level. The data requirements are adapted to the level of regional detail. The Regulation does not require transmission of any data that the Member States consider to be confidential. The statistical data must be completed by metadata that will facilitate interpretation of the numerical data, including country-specific definitions plus information on the data sources and on methodological issues. This is necessary in order to achieve the transparency that is a condition for valid interpretation of the data. Users of output-harmonised census data from the EU Member States need to have detailed information on the quality of the censuses and their results. Regulation (EU) No 1151/2010) therefore requires transmission of a quality report containing a systematic description of the data sources used for census purposes in the Member States and of the quality of the census results produced from these sources. A comparably structured quality report for all EU Member States will support the exchange of experience from the 2011 round and become a reference for future development of census methodology (EU legislation on the 2011 Population and Housing Censuses - Explanatory Notes ). In order to ensure proper transmission of the data and metadata and provide user-friendly access to this information, a common technical format is set for transmission for all Member States and for the Commission (Eurostat). The Regulation therefore requires the data to be transmitted in a harmonised structure and in the internationally established SDMX format from every Member State. In order to achieve this harmonised transmission, a new system has been developed – the CENSUS HUB. The Census Hub is a conceptually new system used for the dissemination of the 2011 Census. It is based on the concept of data sharing, where a group of partners (Eurostat on one hand and National Statistical Institutes on the other) agree to provide access to their data according to standard processes, formats and technologies. The Census Hub is a readily-accessible system that provided the following functions: • Data providers (the NSIs) can make data available directly from their systems through a querying system. In parallel, • Data users browse the hub to define a dataset of interest via the above structural metadata and retrieve the dataset from the NSIs. From the data management point of view, the hub is based on agreed hypercubes (data-sets in the form of multi-dimensional aggregations). The hypercubes are not sent to the central system. Instead the following process operates: 1. a user defines a dataset through the web interface of the central hub and requests it; 2. the central hub translates the user request in one or more queries and sends them to the related NSIs’ systems; 3. NSIs’ systems process the query and send the result to the central hub in a standard format; 4. the central hub puts together all the results sent by the NSI systems and presents them in a user-specified format.
    • 六月 2018
      来源: Eurostat
      上传者: Knoema
      访问日期: 28 九月, 2018
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 十月 2018
      来源: Eurostat
      上传者: Knoema
      访问日期: 04 三月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 三月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 12 十二月, 2015
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 三月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 01 一月, 2014
      选择数据集
      Eurostat Dataset Id:ef_lu_ovcropaa The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards Standard Gross Margin (SGM) and Standard Output (SO) coefficients. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years, several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: one general overview with the key variables, and other specialized groups containing detailed data on land use livestock special interest topics: farm labour force, rural development issues as well as management and practices. The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure. Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 三月, 2019
      选择数据集
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 十月, 2019
      选择数据集
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 21 三月, 2019
      选择数据集
    • 十一月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 19 十一月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, the former Yugoslav Republic of Macedonia, Albania, Iceland, Norway, Liechtenstein and Switzerland. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 九月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 五月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 09 六月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
  • G
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 十月, 2019
      选择数据集
      The gender employment gap is defined as the difference between the employment rates of men and women aged 20-64. The employment rate is calculated by dividing the number of persons aged 20 to 64 in employment by the total population of the same age group. The indicator is based on the EU Labour Force Survey.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 09 九月, 2019
      选择数据集
      Regional accounts are a regional specification of the national accounts and therefore based on the same concepts and definitions as national accounts (see domain nama10). The main specific regional issues are addressed in chapter 13 of ESA2010, but not practically specified. For practical rules and recommendations on sources and methods see the publication "Manual on regional accounts methods": http://ec.europa.eu/eurostat/en/web/products-manuals-and-guidelines/-/KS-GQ-13-001 . Gross domestic product (GDP) at market prices is the final result of the production activity of resident producer units. It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expenditure approach cannot be used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees plus gross operating surplus and mixed income plus taxes on products less subsidies plus consumption of fixed capital. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU28 average.
    • 三月 2014
      来源: Eurostat
      上传者: Knoema
      访问日期: 14 四月, 2014
      选择数据集
      Eurostat Dataset Id:nama_r_e2gdp Gross domestic product - GDP at market prices - is the final result of the production activity of resident producer units (ESA 1995, 8.89). It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expediture approach is not used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees, taxes on production, less subsidies, gross operating surplus and mixed income of the total economy. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU27 average.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 09 九月, 2019
      选择数据集
      Regional accounts are a regional specification of the national accounts and therefore based on the same concepts and definitions as national accounts (see domain nama10). The main specific regional issues are addressed in chapter 13 of ESA2010, but not practically specified. For practical rules and recommendations on sources and methods see the publication "Manual on regional accounts methods": http://ec.europa.eu/eurostat/en/web/products-manuals-and-guidelines/-/KS-GQ-13-001 . Gross domestic product (GDP) at market prices is the final result of the production activity of resident producer units. It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expenditure approach cannot be used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees plus gross operating surplus and mixed income plus taxes on products less subsidies plus consumption of fixed capital. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU Member States average.
    • 二月 2014
      来源: Eurostat
      上传者: Knoema
      访问日期: 14 四月, 2014
      选择数据集
      Eurostat Dataset Id:nama_r_e3gdp National accounts are a coherent and consistent set of macroeconomic indicators, which provide an overall picture of the economic situation and are widely used for economic analysis and forecasting, policy design and policy making. Eurostat publishes annual and quarterly national accounts, annual and quarterly sector accounts as well as supply, use and input-output tables, which are each presented with associated metadata. Annual national accounts are compiled in accordance with the European System of Accounts - ESA 1995 (Council Regulation 2223/96). Annex B of the Regulation consists of a comprehensive list of the variables to be transmitted for Community purposes within specified time limits. This transmission programme has been updated by Regulation (EC) N° 1392/2007 of the European Parliament and of the Council. Meanwhile, the ESA95 has been reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. Further information on the transition from ESA 95 to ESA 2010 is presented on the Eurostat website. The domain consists of the following collections: GDP and main aggregates. The data are recorded at current and constant prices and include the corresponding implicit price indices. Final consumption aggregates, including the split into household and government consumption. The data are recorded at current and constant prices and include the corresponding implicit price indices. Income, saving and net lending / net borrowing at current prices. Disposable income is also shown in real terms. Exports and imports by Member States of the EU/third countries. The data are recorded at current and constant prices and include the corresponding implicit price indices. Breakdowns of gross value added, compensation of employees, wages and salaries, operating surplus, employment (domestic scope), gross fixed capital formation (GFCF) and fixed assets and other main aggregates by industry; investment by products and household final consumption expenditure by consumption purposes (COICOP). The data are recorded at current and constant prices and include the corresponding implicit price indices. Auxiliary indicators: Population and employment national data, purchasing power parities, contributions to GDP growth, labour productivity, unit labour cost and GDP per capita. Geographical entities covered are the European Union, the euro area, EU Member States, Candidate Countries, EFTA countries, US, Japan and possibly other countries on an ad-hoc basis. The data are published: - in ECU/euro, in national currencies (including euro converted from former national currencies using the irrevocably fixed rate for all years) and in Purchasing Power Standards (PPS); - at current prices and in volume terms; - Population and employment are measured in persons. Employment is also measured in total hours worked. Data sources: National Statistical Institutes
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 09 九月, 2019
      选择数据集
      Regional accounts are a regional specification of the national accounts and therefore based on the same concepts and definitions as national accounts (see domain nama10). The main specific regional issues are addressed in chapter 13 of ESA2010, but not practically specified. For practical rules and recommendations on sources and methods see the publication "Manual on regional accounts methods": http://ec.europa.eu/eurostat/en/web/products-manuals-and-guidelines/-/KS-GQ-13-001 . Gross domestic product (GDP) at market prices is the final result of the production activity of resident producer units. It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expenditure approach cannot be used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees plus gross operating surplus and mixed income plus taxes on products less subsidies plus consumption of fixed capital. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU28 average.
    • 六月 2013
      来源: Eurostat
      上传者: Knoema
      访问日期: 14 四月, 2014
      选择数据集
      Eurostat Dataset Id:nama_r_e2gfcfr2 Branch accounts include data on gross value added, compensation of employees, gross fixed capital formation, total employment and number of employees. The legal base for the collection of branch accounts data is the European System of Accounts ESA95. The ESA95 data are sent to Eurostat by the National Statistical Institutes. The units for these variables are: Millions of national currency and millions of Euro for gross value added, compensation of employees and gross fixed capital formation. 1000 persons for total employment and number of employees at NUTS level 3 1000 hours worked for total employment and number of employees at NUTS level 2 Geographical coverage comprises all EU Member States and some Candidate countries down to Nuts 3 level (Nuts = "Nomenclature of territorial units for statistics" - see Eurostat's classification server "RAMON") for the variables gross value added, total employment and number of employees. Compensation of employees, employment in hours worked and gross fixed capital formation are only collected down to Nuts 2 level. For further information about sources and collection methods in the Member States, please refer to National Statistical Institutes (select Services - Links).
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 23 九月, 2019
      选择数据集
      Regional accounts are a regional specification of the national accounts and therefore based on the same concepts and definitions as national accounts (see domain nama10). The main specific regional issues are addressed in chapter 13 of ESA2010, but not practically specified. For practical rules and recommendations on sources and methods see the publication "Manual on regional accounts methods": http://ec.europa.eu/eurostat/en/web/products-manuals-and-guidelines/-/KS-GQ-13-001 . Gross domestic product (GDP) at market prices is the final result of the production activity of resident producer units. It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expenditure approach cannot be used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees plus gross operating surplus and mixed income plus taxes on products less subsidies plus consumption of fixed capital. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU28 average.
    • 三月 2014
      来源: Eurostat
      上传者: Knoema
      访问日期: 14 四月, 2014
      选择数据集
      Eurostat Dataset Id:nama_r_e3vab95r2 Branch accounts include data on gross value added, compensation of employees, gross fixed capital formation, total employment and number of employees. The legal base for the collection of branch accounts data is the European System of Accounts ESA95. The ESA95 data are sent to Eurostat by the National Statistical Institutes. The units for these variables are: Millions of national currency and millions of Euro for gross value added, compensation of employees and gross fixed capital formation. 1000 persons for total employment and number of employees at NUTS level 3 1000 hours worked for total employment and number of employees at NUTS level 2 Geographical coverage comprises all EU Member States and some Candidate countries down to Nuts 3 level (Nuts = "Nomenclature of territorial units for statistics" - see Eurostat's classification server "RAMON") for the variables gross value added, total employment and number of employees. Compensation of employees, employment in hours worked and gross fixed capital formation are only collected down to Nuts 2 level. For further information about sources and collection methods in the Member States, please refer to National Statistical Institutes (select Services - Links).
  • H
    • 八月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 28 八月, 2019
      选择数据集
      Non-expenditure health care data provide information on institutions providing health care in countries, on resources used and on output produced in the framework of health care provision. Data on health care form a major element of public health information as they describe the capacities available for different types of health care provision as well as potential 'bottlenecks' observed. The quantity and quality of health care services provided and the work sharing established between the different institutions are a subject of ongoing debate in all countries. Sustainability - continuously providing the necessary monetary and personal resources needed - and meeting the challenges of ageing societies are the primary perspectives used when analysing and using the data. The output-related data ('activities') refer to contacts between patients and the health care system, and to the treatment thereby received. Data are available for hospital discharges of in-patients and day cases, average length of stay of in-patients and medical procedures performed in hospitals. Annual national and regional data are provided in absolute numbers and in population-standardised rates (per 100 000 inhabitants). Wherever applicable, the definitions and classifications of the System of Health Accounts (SHA) are followed, e.g. International Classification for Health Accounts - Providers of health care (ICHA-HP). For hospital discharges, the International Shortlist for Hospital Morbidity Tabulation (ISHMT) is used. Health care data on activities are largely based on administrative data sources in the countries. Therefore, they reflect the country-specific way of organising health care and may not always be completely comparable.
    • 二月 2010
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 四月, 2014
      选择数据集
      Eurostat Dataset Id:nrg_esdgr_a Consumption of energy depends strongly on weather conditions. If the temperature decreases below a certain value, "heating threshold", more energy is consumed due to increased need for space heating. Taking this into account, Eurostat launched a project aiming at the development and implementation of a common method for the climatic correction of final energy consumption for space heating purposes in the 27 Member States of the European Union. Temperature corrected energy consumption data help interpretating energy consumption trends.
    • 四月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 10 五月, 2016
      选择数据集
    • 十月 2018
      来源: Eurostat
      上传者: Knoema
      访问日期: 03 十一月, 2018
      选择数据集
      The data refers to the ratio of patent applications made directly to the European Patent Office (EPO) or via the Patent Cooperation Treaty and designating the EPO (Euro-PCT), in the field of high-technology patents per million inhabitants of a region. The definition of high-technology patents uses specific subclasses of the International Patent Classification (IPC) as defined in the trilateral statistical report of the EPO, JPO and USPTO.
    • 八月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 28 八月, 2019
      选择数据集
      Non-expenditure health care data provide information on institutions providing health care in countries, on resources used and on output produced in the framework of health care provision. Data on health care form a major element of public health information as they describe the capacities available for different types of health care provision as well as potential 'bottlenecks' observed. The quantity and quality of health care services provided and the work sharing established between the different institutions are a subject of ongoing debate in all countries. Sustainability - continuously providing the necessary monetary and personal resources needed - and meeting the challenges of ageing societies are the primary perspectives used when analysing and using the data. The output-related data ('activities') refer to contacts between patients and the health care system, and to the treatment thereby received. Data are available for hospital discharges of in-patients and day cases, average length of stay of in-patients and medical procedures performed in hospitals. Annual national and regional data are provided in absolute numbers and in population-standardised rates (per 100 000 inhabitants). Wherever applicable, the definitions and classifications of the System of Health Accounts (SHA) are followed, e.g. International Classification for Health Accounts - Providers of health care (ICHA-HP). For hospital discharges, the International Shortlist for Hospital Morbidity Tabulation (ISHMT) is used. Health care data on activities are largely based on administrative data sources in the countries. Therefore, they reflect the country-specific way of organising health care and may not always be completely comparable.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 21 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 21 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 21 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 21 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 21 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 21 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 21 九月, 2019
      选择数据集
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 04 七月, 2019
      选择数据集
      The availability of broadband is measured by the percentage of households that are connectable to an exchange that has been converted to support xDSL-technology, to a cable network upgraded for internet traffic, or to other broadband technologies.
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 04 七月, 2019
      选择数据集
      The access of households to internet is measured as percentage of households where any member of the household has the possibility to access the internet from home.
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 04 七月, 2019
      选择数据集
      Data given in this domain are collected annually by the National Statistical Institutes and are based on Eurostat's annual model questionnaires on ICT (Information and Communication Technologies) usage in households and by individuals. The model questionnaire changes every year. The changes of questions in the MQ are required by the evolving situation of information and communication technologies. Large part of the data collected are used in the context of the follow up of the Digital Single Market process (Monitoring the Digital Economy & Society  2016-2021). This conceptual framework follows the 2011 - 2015 benchmarking framework, the i2010 Benchmarking Framework and the eEurope 2005 Action Plan. ICT usage data are also used in the Consumer Conditions Scoreboard (purchases over the Internet) and in the Employment Guidelines (e-skills of individuals). The aim of the European ICT surveys is the timely provision of statistics on individuals and households on the use of Information and Communication Technologies at European level. Data for this collection are supplied directly from the surveys with no separate treatment. Coverage: The characteristics to be provided are drawn from the following list of subjects: access to and use of ICTs by individuals and/or in households,use of the Internet and other electronic networks for different purposes by individuals and/or in households,ICT security and trust,ICT competence and skills,barriers to the use of ICT and the Internet,perceived effects of ICT usage on individuals and/or on households,use of ICT by individuals to exchange information and services with governments and public administrations (e-government),access to and use of technologies enabling connection to the Internet or other networks from anywhere at any time (ubiquitous connectivity).Breakdowns (see details of available breakdowns): Relating to households: by region of residence (NUTS 1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area) by type of householdby households net monthly income (optional) Relating to individuals: by region of residence (NUTS1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation: (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area)by genderby country of birth, country of citizenship (as of 2010, optional in 2010)by educational level: ISCED 1997 up to 2013 and ISCED 2011 from 2014 onwards.by occupation: manual, non-manual; ICT (coded by 2-digit ISCO categories)/non-ICT (optional: all 2-digit ISCO categories)by employment situationby age (in completed years and by groups)legal / de facto marital status (2011-2014, optional) Regional breakdowns (NUTS) are available only for a selection of indicators disseminated in the regional tables in Eurobase (Regional Information society statistics by NUTS regions (isoc_reg): Households with access to the internet at homeHouseholds with broadband accessIndividuals who have never used a computerIndividuals who used the internet, frequency of use and activitiesIndividuals who used the internet for interaction with public authoritiesIndividuals who ordered goods or services over the internet for private useIndividuals who accessed the internet away from home or work
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 04 七月, 2019
      选择数据集
      Data given in this domain are collected annually by the National Statistical Institutes and are based on Eurostat's annual model questionnaires on ICT (Information and Communication Technologies) usage in households and by individuals. The model questionnaire changes every year. The changes of questions in the MQ are required by the evolving situation of information and communication technologies. Large part of the data collected are used in the context of the follow up of the Digital Single Market process (Monitoring the Digital Economy & Society  2016-2021). This conceptual framework follows the 2011 - 2015 benchmarking framework, the i2010 Benchmarking Framework and the eEurope 2005 Action Plan. ICT usage data are also used in the Consumer Conditions Scoreboard (purchases over the Internet) and in the Employment Guidelines (e-skills of individuals). The aim of the European ICT surveys is the timely provision of statistics on individuals and households on the use of Information and Communication Technologies at European level. Data for this collection are supplied directly from the surveys with no separate treatment. Coverage: The characteristics to be provided are drawn from the following list of subjects: access to and use of ICTs by individuals and/or in households,use of the Internet and other electronic networks for different purposes by individuals and/or in households,ICT security and trust,ICT competence and skills,barriers to the use of ICT and the Internet,perceived effects of ICT usage on individuals and/or on households,use of ICT by individuals to exchange information and services with governments and public administrations (e-government),access to and use of technologies enabling connection to the Internet or other networks from anywhere at any time (ubiquitous connectivity).Breakdowns (see details of available breakdowns): Relating to households: by region of residence (NUTS 1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area) by type of householdby households net monthly income (optional) Relating to individuals: by region of residence (NUTS1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation: (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area)by genderby country of birth, country of citizenship (as of 2010, optional in 2010)by educational level: ISCED 1997 up to 2013 and ISCED 2011 from 2014 onwards.by occupation: manual, non-manual; ICT (coded by 2-digit ISCO categories)/non-ICT (optional: all 2-digit ISCO categories)by employment situationby age (in completed years and by groups)legal / de facto marital status (2011-2014, optional) Regional breakdowns (NUTS) are available only for a selection of indicators disseminated in the regional tables in Eurobase (Regional Information society statistics by NUTS regions (isoc_reg): Households with access to the internet at homeHouseholds with broadband accessIndividuals who have never used a computerIndividuals who used the internet, frequency of use and activitiesIndividuals who used the internet for interaction with public authoritiesIndividuals who ordered goods or services over the internet for private useIndividuals who accessed the internet away from home or work
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 30 十月, 2019
      选择数据集
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 十月, 2019
      选择数据集
      Human resources in science and technology (HRST) as a share of the active population in the age group 15-74 at the regional NUTS 2 level. The data shows the active population in the age group 15-74 that is classified as HRST (i.e. having successfully completed an education at the third level or being employed in science and technology) as a percentage of total active population aged 15-74. HRST are measured mainly using the concepts and definitions laid down in the Canberra Manual, OECD, Paris, 1995.
  • I
    • 四月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 10 五月, 2016
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 01 十月, 2019
      选择数据集
      Regional accounts are a regional specification of the national accounts and therefore based on the same concepts and definitions as national accounts (see domain nama10). The main specific regional issues are addressed in chapter 13 of ESA2010, but not practically specified. For practical rules and recommendations on sources and methods see the publication "Manual on regional accounts methods": http://ec.europa.eu/eurostat/en/web/products-manuals-and-guidelines/-/KS-GQ-13-001 . Gross domestic product (GDP) at market prices is the final result of the production activity of resident producer units. It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expenditure approach cannot be used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees plus gross operating surplus and mixed income plus taxes on products less subsidies plus consumption of fixed capital. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU Member States average.
    • 三月 2014
      来源: Eurostat
      上传者: Knoema
      访问日期: 15 四月, 2014
      选择数据集
      Eurostat Dataset Id:nama_r_ehh2inc Household accounts include data for individuals or groups of individuals as consumers and possibly as producers of goods for own use as well as non-profit institutions serving households. Data on household accounts include 11 indicators. The most important are primary income and disposable income. Geographic coverage comprises all EU Member States and some Candidate countries down to the Nuts 2 level breakdown (Nuts = "Nomenclature of territorial units for statistics" - see Eurostat's classification server "RAMON").
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 04 七月, 2019
      选择数据集
      Regular users of the internet are persons who use the internet on average at least once a week, every day or almost every day.
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 04 七月, 2019
      选择数据集
      Data given in this domain are collected annually by the National Statistical Institutes and are based on Eurostat's annual model questionnaires on ICT (Information and Communication Technologies) usage in households and by individuals. The model questionnaire changes every year. The changes of questions in the MQ are required by the evolving situation of information and communication technologies. Large part of the data collected are used in the context of the follow up of the Digital Single Market process (Monitoring the Digital Economy & Society  2016-2021). This conceptual framework follows the 2011 - 2015 benchmarking framework, the i2010 Benchmarking Framework and the eEurope 2005 Action Plan. ICT usage data are also used in the Consumer Conditions Scoreboard (purchases over the Internet) and in the Employment Guidelines (e-skills of individuals). The aim of the European ICT surveys is the timely provision of statistics on individuals and households on the use of Information and Communication Technologies at European level. Data for this collection are supplied directly from the surveys with no separate treatment. Coverage: The characteristics to be provided are drawn from the following list of subjects: access to and use of ICTs by individuals and/or in households,use of the Internet and other electronic networks for different purposes by individuals and/or in households,ICT security and trust,ICT competence and skills,barriers to the use of ICT and the Internet,perceived effects of ICT usage on individuals and/or on households,use of ICT by individuals to exchange information and services with governments and public administrations (e-government),access to and use of technologies enabling connection to the Internet or other networks from anywhere at any time (ubiquitous connectivity).Breakdowns (see details of available breakdowns): Relating to households: by region of residence (NUTS 1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area) by type of householdby households net monthly income (optional) Relating to individuals: by region of residence (NUTS1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation: (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area)by genderby country of birth, country of citizenship (as of 2010, optional in 2010)by educational level: ISCED 1997 up to 2013 and ISCED 2011 from 2014 onwards.by occupation: manual, non-manual; ICT (coded by 2-digit ISCO categories)/non-ICT (optional: all 2-digit ISCO categories)by employment situationby age (in completed years and by groups)legal / de facto marital status (2011-2014, optional) Regional breakdowns (NUTS) are available only for a selection of indicators disseminated in the regional tables in Eurobase (Regional Information society statistics by NUTS regions (isoc_reg): Households with access to the internet at homeHouseholds with broadband accessIndividuals who have never used a computerIndividuals who used the internet, frequency of use and activitiesIndividuals who used the internet for interaction with public authoritiesIndividuals who ordered goods or services over the internet for private useIndividuals who accessed the internet away from home or work
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 04 七月, 2019
      选择数据集
      Data given in this domain are collected annually by the National Statistical Institutes and are based on Eurostat's annual model questionnaires on ICT (Information and Communication Technologies) usage in households and by individuals. The model questionnaire changes every year. The changes of questions in the MQ are required by the evolving situation of information and communication technologies. Large part of the data collected are used in the context of the follow up of the Digital Single Market process (Monitoring the Digital Economy & Society  2016-2021). This conceptual framework follows the 2011 - 2015 benchmarking framework, the i2010 Benchmarking Framework and the eEurope 2005 Action Plan. ICT usage data are also used in the Consumer Conditions Scoreboard (purchases over the Internet) and in the Employment Guidelines (e-skills of individuals). The aim of the European ICT surveys is the timely provision of statistics on individuals and households on the use of Information and Communication Technologies at European level. Data for this collection are supplied directly from the surveys with no separate treatment. Coverage: The characteristics to be provided are drawn from the following list of subjects: access to and use of ICTs by individuals and/or in households,use of the Internet and other electronic networks for different purposes by individuals and/or in households,ICT security and trust,ICT competence and skills,barriers to the use of ICT and the Internet,perceived effects of ICT usage on individuals and/or on households,use of ICT by individuals to exchange information and services with governments and public administrations (e-government),access to and use of technologies enabling connection to the Internet or other networks from anywhere at any time (ubiquitous connectivity).Breakdowns (see details of available breakdowns): Relating to households: by region of residence (NUTS 1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area) by type of householdby households net monthly income (optional) Relating to individuals: by region of residence (NUTS1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation: (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area)by genderby country of birth, country of citizenship (as of 2010, optional in 2010)by educational level: ISCED 1997 up to 2013 and ISCED 2011 from 2014 onwards.by occupation: manual, non-manual; ICT (coded by 2-digit ISCO categories)/non-ICT (optional: all 2-digit ISCO categories)by employment situationby age (in completed years and by groups)legal / de facto marital status (2011-2014, optional) Regional breakdowns (NUTS) are available only for a selection of indicators disseminated in the regional tables in Eurobase (Regional Information society statistics by NUTS regions (isoc_reg): Households with access to the internet at homeHouseholds with broadband accessIndividuals who have never used a computerIndividuals who used the internet, frequency of use and activitiesIndividuals who used the internet for interaction with public authoritiesIndividuals who ordered goods or services over the internet for private useIndividuals who accessed the internet away from home or work
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 04 七月, 2019
      选择数据集
      Persons who have never used a computer (at home, at work or any other place).
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 08 七月, 2019
      选择数据集
      Data given in this domain are collected annually by the National Statistical Institutes and are based on Eurostat's annual model questionnaires on ICT (Information and Communication Technologies) usage in households and by individuals. The model questionnaire changes every year. The changes of questions in the MQ are required by the evolving situation of information and communication technologies. Large part of the data collected are used in the context of the follow up of the Digital Single Market process (Monitoring the Digital Economy & Society  2016-2021). This conceptual framework follows the 2011 - 2015 benchmarking framework, the i2010 Benchmarking Framework and the eEurope 2005 Action Plan. ICT usage data are also used in the Consumer Conditions Scoreboard (purchases over the Internet) and in the Employment Guidelines (e-skills of individuals). The aim of the European ICT surveys is the timely provision of statistics on individuals and households on the use of Information and Communication Technologies at European level. Data for this collection are supplied directly from the surveys with no separate treatment. Coverage: The characteristics to be provided are drawn from the following list of subjects: access to and use of ICTs by individuals and/or in households,use of the Internet and other electronic networks for different purposes by individuals and/or in households,ICT security and trust,ICT competence and skills,barriers to the use of ICT and the Internet,perceived effects of ICT usage on individuals and/or on households,use of ICT by individuals to exchange information and services with governments and public administrations (e-government),access to and use of technologies enabling connection to the Internet or other networks from anywhere at any time (ubiquitous connectivity).Breakdowns (see details of available breakdowns): Relating to households: by region of residence (NUTS 1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area) by type of householdby households net monthly income (optional) Relating to individuals: by region of residence (NUTS1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation: (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area)by genderby country of birth, country of citizenship (as of 2010, optional in 2010)by educational level: ISCED 1997 up to 2013 and ISCED 2011 from 2014 onwards.by occupation: manual, non-manual; ICT (coded by 2-digit ISCO categories)/non-ICT (optional: all 2-digit ISCO categories)by employment situationby age (in completed years and by groups)legal / de facto marital status (2011-2014, optional) Regional breakdowns (NUTS) are available only for a selection of indicators disseminated in the regional tables in Eurobase (Regional Information society statistics by NUTS regions (isoc_reg): Households with access to the internet at homeHouseholds with broadband accessIndividuals who have never used a computerIndividuals who used the internet, frequency of use and activitiesIndividuals who used the internet for interaction with public authoritiesIndividuals who ordered goods or services over the internet for private useIndividuals who accessed the internet away from home or work
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 04 七月, 2019
      选择数据集
      Persons who bought or ordered goods or services (i.e. food, groceries, household goods, films, music, books, magazines, newspapers, clothes, sports goods, computer software or hardware, electronic equipment, shares, financial services, insurances, travel or holiday accommodation, tickets, lotteries or betting and other) over the internet during the last year.
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 04 七月, 2019
      选择数据集
      Data given in this domain are collected annually by the National Statistical Institutes and are based on Eurostat's annual model questionnaires on ICT (Information and Communication Technologies) usage in households and by individuals. The model questionnaire changes every year. The changes of questions in the MQ are required by the evolving situation of information and communication technologies. Large part of the data collected are used in the context of the follow up of the Digital Single Market process (Monitoring the Digital Economy & Society  2016-2021). This conceptual framework follows the 2011 - 2015 benchmarking framework, the i2010 Benchmarking Framework and the eEurope 2005 Action Plan. ICT usage data are also used in the Consumer Conditions Scoreboard (purchases over the Internet) and in the Employment Guidelines (e-skills of individuals). The aim of the European ICT surveys is the timely provision of statistics on individuals and households on the use of Information and Communication Technologies at European level. Data for this collection are supplied directly from the surveys with no separate treatment. Coverage: The characteristics to be provided are drawn from the following list of subjects: access to and use of ICTs by individuals and/or in households,use of the Internet and other electronic networks for different purposes by individuals and/or in households,ICT security and trust,ICT competence and skills,barriers to the use of ICT and the Internet,perceived effects of ICT usage on individuals and/or on households,use of ICT by individuals to exchange information and services with governments and public administrations (e-government),access to and use of technologies enabling connection to the Internet or other networks from anywhere at any time (ubiquitous connectivity).Breakdowns (see details of available breakdowns): Relating to households: by region of residence (NUTS 1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area) by type of householdby households net monthly income (optional) Relating to individuals: by region of residence (NUTS1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation: (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area)by genderby country of birth, country of citizenship (as of 2010, optional in 2010)by educational level: ISCED 1997 up to 2013 and ISCED 2011 from 2014 onwards.by occupation: manual, non-manual; ICT (coded by 2-digit ISCO categories)/non-ICT (optional: all 2-digit ISCO categories)by employment situationby age (in completed years and by groups)legal / de facto marital status (2011-2014, optional) Regional breakdowns (NUTS) are available only for a selection of indicators disseminated in the regional tables in Eurobase (Regional Information society statistics by NUTS regions (isoc_reg): Households with access to the internet at homeHouseholds with broadband accessIndividuals who have never used a computerIndividuals who used the internet, frequency of use and activitiesIndividuals who used the internet for interaction with public authoritiesIndividuals who ordered goods or services over the internet for private useIndividuals who accessed the internet away from home or work
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 08 七月, 2019
      选择数据集
      Data given in this domain are collected annually by the National Statistical Institutes and are based on Eurostat's annual model questionnaires on ICT (Information and Communication Technologies) usage in households and by individuals. The model questionnaire changes every year. The changes of questions in the MQ are required by the evolving situation of information and communication technologies. Large part of the data collected are used in the context of the follow up of the Digital Single Market process (Monitoring the Digital Economy & Society  2016-2021). This conceptual framework follows the 2011 - 2015 benchmarking framework, the i2010 Benchmarking Framework and the eEurope 2005 Action Plan. ICT usage data are also used in the Consumer Conditions Scoreboard (purchases over the Internet) and in the Employment Guidelines (e-skills of individuals). The aim of the European ICT surveys is the timely provision of statistics on individuals and households on the use of Information and Communication Technologies at European level. Data for this collection are supplied directly from the surveys with no separate treatment. Coverage: The characteristics to be provided are drawn from the following list of subjects: access to and use of ICTs by individuals and/or in households,use of the Internet and other electronic networks for different purposes by individuals and/or in households,ICT security and trust,ICT competence and skills,barriers to the use of ICT and the Internet,perceived effects of ICT usage on individuals and/or on households,use of ICT by individuals to exchange information and services with governments and public administrations (e-government),access to and use of technologies enabling connection to the Internet or other networks from anywhere at any time (ubiquitous connectivity).Breakdowns (see details of available breakdowns): Relating to households: by region of residence (NUTS 1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area) by type of householdby households net monthly income (optional) Relating to individuals: by region of residence (NUTS1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation: (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area)by genderby country of birth, country of citizenship (as of 2010, optional in 2010)by educational level: ISCED 1997 up to 2013 and ISCED 2011 from 2014 onwards.by occupation: manual, non-manual; ICT (coded by 2-digit ISCO categories)/non-ICT (optional: all 2-digit ISCO categories)by employment situationby age (in completed years and by groups)legal / de facto marital status (2011-2014, optional) Regional breakdowns (NUTS) are available only for a selection of indicators disseminated in the regional tables in Eurobase (Regional Information society statistics by NUTS regions (isoc_reg): Households with access to the internet at homeHouseholds with broadband accessIndividuals who have never used a computerIndividuals who used the internet, frequency of use and activitiesIndividuals who used the internet for interaction with public authoritiesIndividuals who ordered goods or services over the internet for private useIndividuals who accessed the internet away from home or work
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 九月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 三月, 2019
      选择数据集
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 三月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 九月, 2019
      选择数据集
    • 六月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 六月, 2019
      选择数据集
    • 三月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 29 十一月, 2015
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 四月 2018
      来源: Eurostat
      上传者: Knoema
      访问日期: 29 四月, 2018
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
  • K
    • 一月 2017
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 一月, 2017
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 三月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 29 十一月, 2015
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 三月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 29 十一月, 2015
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 一月 2017
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 一月, 2017
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 一月 2017
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 一月, 2017
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
  • L
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 15 十月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 19 十月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 16 九月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 15 十月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 四月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 五月, 2014
      选择数据集
      Eurostat Dataset Id:ef_so_lfesu The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwardsStandard Gross Margin (SGM) and Standard Output (SO) coefficients. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:one general overview with the key variables,and other specialized groups containing detailed data onland uselivestockspecial interest topics: farm labour force, rural development issues as well as management and practices. The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 四月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 五月, 2014
      选择数据集
      Eurostat Dataset Id:ef_so_lfaa The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwardsStandard Gross Margin (SGM) and Standard Output (SO) coefficients. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:one general overview with the key variables,and other specialized groups containing detailed data onland uselivestockspecial interest topics: farm labour force, rural development issues as well as management and practices. The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 一月 2017
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 一月, 2017
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 十月, 2019
      选择数据集
      LUCAS is the acronym of Land Use and Cover Area frame Survey. The aim of the LUCAS survey is to gather harmonised information on land use, land cover and environmental parameters. The survey also provides territorial information to analyse the interactions between agriculture, environment and countryside, such as irrigation and land management. Since 2006, EUROSTAT has carried out LUCAS surveys every three years. 2006 data is considered pilot and has not been used to produce estimates. The most recent surveys happened in the spring-summer of 2009, 2012 and 2015. Since the LUCAS surveys are carried out in-situ, this means that observations are made and registered on the ground by field surveyors. A mixed panel approach is used, so some points are visited in subsequent years. In the field, the surveyor classifies the land cover and the visible land use according to the harmonized LUCAS Survey land cover and land use classifications. Landscape pictures are taken in the four cardinal directions. A transect of 250m is walked from the point to the east direction, where the surveyor records all transitions of land cover and existing linear features. A specific topsoil module was implemented in 2009, in 2012 (partly) and in 2015. From the LUCAS survey in situ data collection, different types of information are obtained: - Micro data - Images - Statistical tables 1. Micro data Land cover, land use and environmental parameters associated to the single surveyed points are available freely for download in the LUCAS dedicated section. Transect indicators on landscape features related to the sigle point (diversity and richness) are also part of the information available for free download. Specific ad hoc modules have been included in some surveys such as the 2009 and 2015 topsoil samples taken on 10% of total LUCAS points. Soil results for 25 countries are available via the JRC Land resource management unit under license agreement. In 2012 the soil module was implemented in Bulgaria and Romania. The soil samples of the 2015 collection are currently being analysed in laboratories. 2. Images Point and landscape photos taken in the four cardinal directions at each point are available freely by request either via e-mail contact to estat-user-support@ec.europa.eu or by using the online order form. 3. Statistical tables Statistical tables with aggregated results by land cover, land use at geographical level are available in Eurobase under the domain land cover, land use and landscape (LUCAS). The statistics are presented at NUTS0, NUTS1 and NUTS2 levels using the classification for NUTS 2013. These estimates are based on the point data conveniently weighted. For further information on weighting refer to chapter 20.5 Data compilation and Quality Reports.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 01 十一月, 2019
      选择数据集
      LUCAS is the acronym of Land Use and Cover Area frame Survey. The aim of the LUCAS survey is to gather harmonised information on land use, land cover and environmental parameters. The survey also provides territorial information to analyse the interactions between agriculture, environment and countryside, such as irrigation and land management. Since 2006, EUROSTAT has carried out LUCAS surveys every three years. 2006 data is considered pilot and has not been used to produce estimates. The most recent surveys happened in the spring-summer of 2009, 2012 and 2015. Since the LUCAS surveys are carried out in-situ, this means that observations are made and registered on the ground by field surveyors. A mixed panel approach is used, so some points are visited in subsequent years. In the field, the surveyor classifies the land cover and the visible land use according to the harmonized LUCAS Survey land cover and land use classifications. Landscape pictures are taken in the four cardinal directions. A transect of 250m is walked from the point to the east direction, where the surveyor records all transitions of land cover and existing linear features. A specific topsoil module was implemented in 2009, in 2012 (partly) and in 2015. From the LUCAS survey in situ data collection, different types of information are obtained: - Micro data - Images - Statistical tables 1. Micro data Land cover, land use and environmental parameters associated to the single surveyed points are available freely for download in the LUCAS dedicated section. Transect indicators on landscape features related to the sigle point (diversity and richness) are also part of the information available for free download. Specific ad hoc modules have been included in some surveys such as the 2009 and 2015 topsoil samples taken on 10% of total LUCAS points. Soil results for 25 countries are available via the JRC Land resource management unit under license agreement. In 2012 the soil module was implemented in Bulgaria and Romania. The soil samples of the 2015 collection are currently being analysed in laboratories. 2. Images Point and landscape photos taken in the four cardinal directions at each point are available freely by request either via e-mail contact to estat-user-support@ec.europa.eu or by using the online order form. 3. Statistical tables Statistical tables with aggregated results by land cover, land use at geographical level are available in Eurobase under the domain land cover, land use and landscape (LUCAS). The statistics are presented at NUTS0, NUTS1 and NUTS2 levels using the classification for NUTS 2013. These estimates are based on the point data conveniently weighted. For further information on weighting refer to chapter 20.5 Data compilation and Quality Reports.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 01 十一月, 2019
      选择数据集
      LUCAS is the acronym of Land Use and Cover Area frame Survey. The aim of the LUCAS survey is to gather harmonised information on land use, land cover and environmental parameters. The survey also provides territorial information to analyse the interactions between agriculture, environment and countryside, such as irrigation and land management. Since 2006, EUROSTAT has carried out LUCAS surveys every three years. 2006 data is considered pilot and has not been used to produce estimates. The most recent surveys happened in the spring-summer of 2009, 2012 and 2015. Since the LUCAS surveys are carried out in-situ, this means that observations are made and registered on the ground by field surveyors. A mixed panel approach is used, so some points are visited in subsequent years. In the field, the surveyor classifies the land cover and the visible land use according to the harmonized LUCAS Survey land cover and land use classifications. Landscape pictures are taken in the four cardinal directions. A transect of 250m is walked from the point to the east direction, where the surveyor records all transitions of land cover and existing linear features. A specific topsoil module was implemented in 2009, in 2012 (partly) and in 2015. From the LUCAS survey in situ data collection, different types of information are obtained: - Micro data - Images - Statistical tables 1. Micro data Land cover, land use and environmental parameters associated to the single surveyed points are available freely for download in the LUCAS dedicated section. Transect indicators on landscape features related to the sigle point (diversity and richness) are also part of the information available for free download. Specific ad hoc modules have been included in some surveys such as the 2009 and 2015 topsoil samples taken on 10% of total LUCAS points. Soil results for 25 countries are available via the JRC Land resource management unit under license agreement. In 2012 the soil module was implemented in Bulgaria and Romania. The soil samples of the 2015 collection are currently being analysed in laboratories. 2. Images Point and landscape photos taken in the four cardinal directions at each point are available freely by request either via e-mail contact to estat-user-support@ec.europa.eu or by using the online order form. 3. Statistical tables Statistical tables with aggregated results by land cover, land use at geographical level are available in Eurobase under the domain land cover, land use and landscape (LUCAS). The statistics are presented at NUTS0, NUTS1 and NUTS2 levels using the classification for NUTS 2013. These estimates are based on the point data conveniently weighted. For further information on weighting refer to chapter 20.5 Data compilation and Quality Reports.
    • 三月 2014
      来源: Eurostat
      上传者: Knoema
      访问日期: 13 四月, 2014
      选择数据集
      Eurostat Dataset Id:agr_r_landuse
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 01 十一月, 2019
      选择数据集
      LUCAS is the acronym of Land Use and Cover Area frame Survey. The aim of the LUCAS survey is to gather harmonised information on land use, land cover and environmental parameters. The survey also provides territorial information to analyse the interactions between agriculture, environment and countryside, such as irrigation and land management. Since 2006, EUROSTAT has carried out LUCAS surveys every three years. 2006 data is considered pilot and has not been used to produce estimates. The most recent surveys happened in the spring-summer of 2009, 2012 and 2015. Since the LUCAS surveys are carried out in-situ, this means that observations are made and registered on the ground by field surveyors. A mixed panel approach is used, so some points are visited in subsequent years. In the field, the surveyor classifies the land cover and the visible land use according to the harmonized LUCAS Survey land cover and land use classifications. Landscape pictures are taken in the four cardinal directions. A transect of 250m is walked from the point to the east direction, where the surveyor records all transitions of land cover and existing linear features. A specific topsoil module was implemented in 2009, in 2012 (partly) and in 2015. From the LUCAS survey in situ data collection, different types of information are obtained: - Micro data - Images - Statistical tables 1. Micro data Land cover, land use and environmental parameters associated to the single surveyed points are available freely for download in the LUCAS dedicated section. Transect indicators on landscape features related to the sigle point (diversity and richness) are also part of the information available for free download. Specific ad hoc modules have been included in some surveys such as the 2009 and 2015 topsoil samples taken on 10% of total LUCAS points. Soil results for 25 countries are available via the JRC Land resource management unit under license agreement. In 2012 the soil module was implemented in Bulgaria and Romania. The soil samples of the 2015 collection are currently being analysed in laboratories. 2. Images Point and landscape photos taken in the four cardinal directions at each point are available freely by request either via e-mail contact to estat-user-support@ec.europa.eu or by using the online order form. 3. Statistical tables Statistical tables with aggregated results by land cover, land use at geographical level are available in Eurobase under the domain land cover, land use and landscape (LUCAS). The statistics are presented at NUTS0, NUTS1 and NUTS2 levels using the classification for NUTS 2013. These estimates are based on the point data conveniently weighted. For further information on weighting refer to chapter 20.5 Data compilation and Quality Reports.
    • 一月 2017
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 一月, 2017
      选择数据集
      Eurostat Dataset Id:ef_oluaareg The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards Standard Gross Margin (SGM) and Standard Output (SO) coefficients. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years, several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: one general overview with the key variables, and other specialized groups containing detailed data on land use livestock special interest topics: farm labour force, rural development issues as well as management and practices. The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure. Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 一月 2017
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 一月, 2017
      选择数据集
      Eurostat Dataset Id:ef_oluecsreg The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards Standard Gross Margin (SGM) and Standard Output (SO) coefficients. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years, several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: one general overview with the key variables, and other specialized groups containing detailed data on land use livestock special interest topics: farm labour force, rural development issues as well as management and practices. The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure. Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 11 九月, 2019
      选择数据集
      The mean number of years that a newborn child can expect to live if subjected throughout his life to the current mortality conditions (age specific probabilities of dying).
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 14 九月, 2019
      选择数据集
    • 六月 2013
      来源: Eurostat
      上传者: Knoema
      访问日期: 06 八月, 2013
      选择数据集
      This Dataset presents 8 Tables: Age specific death rate (Mx) by NUTS 2 regions (demo_r_mdthrt), Probability of dying between exact ages (qx) by NUTS 2 regions (demo_r_mpbdth), Probability of surviving between exact ages (px) by NUTS 2 regions (demo_r_mpbsurv), Number left alive at given exact age (lx) by NUTS 2 regions (demo_r_msurv), Number dying between exact ages (dx) by NUTS 2 regions (demo_r_mdie), Person-years lived between exact age (Lx) (demo_r_mpyliv), Total person-years lived above given exact age (Tx) by NUTS 2 regions (demo_r_mtotpyliv), Life expectancy at given exact age (ex) by NUTS 2 regions (demo_r_mlifexp). Note: Eurostat Hierarchy: General and regional statistics > Population and social conditions > Population (populat) > Demography (pop) > Demography - Regional data (demoreg) > Life table - NUTS level 2 regions (demo_rmlifetable).
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 14 九月, 2019
      选择数据集
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 十月, 2019
      选择数据集
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 十月, 2019
      选择数据集
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 05 三月, 2019
      选择数据集
    • 五月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 五月, 2019
      选择数据集
      Live births are the births of children that showed any sign of life
    • 三月 2012
      来源: Eurostat
      上传者: Knoema
      访问日期: 30 七月, 2012
      选择数据集
      General and regional statistics > Regional statistics > Regional agriculture statistics > Agri-Environmental Indicators > Livestock density by NUTS 3 regions
    • 三月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 02 十二月, 2015
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 三月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 02 十二月, 2015
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 三月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 12 十二月, 2015
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 一月 2017
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 一月, 2017
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 一月 2017
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 一月, 2017
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 一月 2017
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 一月, 2017
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 八月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 27 八月, 2019
      选择数据集
      Non-expenditure health care data provide information on institutions providing health care in countries, on resources used and on output produced in the framework of health care provision. Data on health care form a major element of public health information as they describe the capacities available for different types of health care provision as well as potential 'bottlenecks' observed. The quantity and quality of health care services provided and the work sharing established between the different institutions are a subject of ongoing debate in all countries. Sustainability - continuously providing the necessary monetary and personal resources needed - and meeting the challenges of ageing societies are the primary perspectives used when analysing and using the data. The output-related data ('activities') refer to contacts between patients and the health care system, and to the treatment thereby received. Data are available for hospital discharges of in-patients and day cases, average length of stay of in-patients and medical procedures performed in hospitals. Annual national and regional data are provided in absolute numbers and in population-standardised rates (per 100 000 inhabitants). Wherever applicable, the definitions and classifications of the System of Health Accounts (SHA) are followed, e.g. International Classification for Health Accounts - Providers of health care (ICHA-HP). For hospital discharges, the International Shortlist for Hospital Morbidity Tabulation (ISHMT) is used. Health care data on activities are largely based on administrative data sources in the countries. Therefore, they reflect the country-specific way of organising health care and may not always be completely comparable.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 26 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
  • M
    • 五月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 02 六月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 五月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 02 六月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 八月 2018
      来源: Eurostat
      上传者: Knoema
      访问日期: 15 八月, 2018
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 五月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 09 六月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 一月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 03 二月, 2016
      选择数据集
      Europop2013, the latest population projections released by Eurostat, provide a set of different scenarios for possible population developments at national and regional levels across 31 European countries: all of the EU-28 Member States, as well as Iceland, Norway and Switzerland. These population projections were produced using data for 1 January 2013 as a starting point and therefore include any modifications made to demographic statistics resulting from the 2011 population census exercise. They were developed based on application of a main input dataset of assumptions on future developments for fertility, mortality and net migration covering the time period 2013 to 2080. Europop2013 at national level includes detailed statistical information related to the main scenario and its four variants with reference to:projected population on 1st January by age and sex;assumptions datasets: age-specific fertility rates, age-specific mortality rates and international net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex for main scenario and higher life expectancy variant;total numbers of projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population.the time horizon covered is from 2013 until 2080 for the main scenario and no migration variant, and from 2013 until 2060 for the higher life expectancy, reduced migration and lower fertility variants. Europop2013 at regional level includes statistical information related to the main scenario with reference to:projected population on 1st January by age and sex;assumptions dataset: age-specific fertility rates, age-specific mortality rates and net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex;total numbers of projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population.the time horizon covered is from 2013 until 2080.data available are rounded therefore the sum of regional figures for populations and for net migrations will differ from the national ones by few units.287 regions classified as NUTS level 2 corresponding to NUTS-2010 classification (the Nomenclature of Territorial Units for Statistics) and to the Statistical Regions agreed between European Commission and Iceland, Norway and Switzerland. Due to the relative small population the following countries have one NUTS level 2 region: Estonia, Cyprus, Latvia, Lithuania, Luxembourg, Malta and Iceland. Thus, for these countries the projected population data for NUTS level 2 region are identical to national data.
    • 八月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 27 十一月, 2015
      选择数据集
      Europop2013, the latest population projections released by Eurostat, provide a set of different scenarios for possible population developments at national and regional levels across 31 European countries: all of the EU-28 Member States, as well as Iceland, Norway and Switzerland. These population projections were produced using data for 1 January 2013 as a starting point and therefore include any modifications made to demographic statistics resulting from the 2011 population census exercise. They were developed based on application of a main input dataset of assumptions on future developments for fertility, mortality and net migration covering the time period 2013 to 2080. Europop2013 at national level includes detailed statistical information related to the main scenario and its four variants with reference to:projected population on 1st January by age and sex;assumptions datasets: age-specific fertility rates, age-specific mortality rates and international net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex for main scenario and higher life expectancy variant;total numbers of projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population.the time horizon covered is from 2013 until 2080 for the main scenario and no migration variant, and from 2013 until 2060 for the higher life expectancy, reduced migration and lower fertility variants. Europop2013 at regional level includes statistical information related to the main scenario with reference to:projected population on 1st January by age and sex;assumptions dataset: age-specific fertility rates, age-specific mortality rates and net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex;total numbers of projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population.the time horizon covered is from 2013 until 2080.data available are rounded therefore the sum of regional figures for populations and for net migrations will differ from the national ones by few units.287 regions classified as NUTS level 2 corresponding to NUTS-2010 classification (the Nomenclature of Territorial Units for Statistics) and to the Statistical Regions agreed between European Commission and Iceland, Norway and Switzerland. Due to the relative small population the following countries have one NUTS level 2 region: Estonia, Cyprus, Latvia, Lithuania, Luxembourg, Malta and Iceland. Thus, for these countries the projected population data for NUTS level 2 region are identical to national data.
    • 九月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 03 十一月, 2015
      选择数据集
      Europop2013, the latest population projections released by Eurostat, provide a set of different scenarios for possible population developments at national and regional levels across 31 European countries: all of the EU-28 Member States, as well as Iceland, Norway and Switzerland. These population projections were produced using data for 1 January 2013 as a starting point and therefore include any modifications made to demographic statistics resulting from the 2011 population census exercise. They were developed based on application of a main input dataset of assumptions on future developments for fertility, mortality and net migration covering the time period 2013 to 2080. Europop2013 at national level includes detailed statistical information related to the main scenario and its four variants with reference to:projected population on 1st January by age and sex;assumptions datasets: age-specific fertility rates, age-specific mortality rates and international net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex for main scenario and higher life expectancy variant;total numbers of projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population.the time horizon covered is from 2013 until 2080 for the main scenario and no migration variant, and from 2013 until 2060 for the higher life expectancy, reduced migration and lower fertility variants. Europop2013 at regional level includes statistical information related to the main scenario with reference to:projected population on 1st January by age and sex;assumptions dataset: age-specific fertility rates, age-specific mortality rates and net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex;total numbers of projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population.the time horizon covered is from 2013 until 2080.data available are rounded therefore the sum of regional figures for populations and for net migrations will differ from the national ones by few units.287 regions classified as NUTS level 2 corresponding to NUTS-2010 classification (the Nomenclature of Territorial Units for Statistics) and to the Statistical Regions agreed between European Commission and Iceland, Norway and Switzerland. Due to the relative small population the following countries have one NUTS level 2 region: Estonia, Cyprus, Latvia, Lithuania, Luxembourg, Malta and Iceland. Thus, for these countries the projected population data for NUTS level 2 region are identical to national data.
    • 九月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 03 十一月, 2015
      选择数据集
      Europop2013, the latest population projections released by Eurostat, provide a set of different scenarios for possible population developments at national and regional levels across 31 European countries: all of the EU-28 Member States, as well as Iceland, Norway and Switzerland. These population projections were produced using data for 1 January 2013 as a starting point and therefore include any modifications made to demographic statistics resulting from the 2011 population census exercise. They were developed based on application of a main input dataset of assumptions on future developments for fertility, mortality and net migration covering the time period 2013 to 2080. Europop2013 at national level includes detailed statistical information related to the main scenario and its four variants with reference to:projected population on 1st January by age and sex;assumptions datasets: age-specific fertility rates, age-specific mortality rates and international net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex for main scenario and higher life expectancy variant;total numbers of projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population.the time horizon covered is from 2013 until 2080 for the main scenario and no migration variant, and from 2013 until 2060 for the higher life expectancy, reduced migration and lower fertility variants. Europop2013 at regional level includes statistical information related to the main scenario with reference to:projected population on 1st January by age and sex;assumptions dataset: age-specific fertility rates, age-specific mortality rates and net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex;total numbers of projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population.the time horizon covered is from 2013 until 2080.data available are rounded therefore the sum of regional figures for populations and for net migrations will differ from the national ones by few units.287 regions classified as NUTS level 2 corresponding to NUTS-2010 classification (the Nomenclature of Territorial Units for Statistics) and to the Statistical Regions agreed between European Commission and Iceland, Norway and Switzerland. Due to the relative small population the following countries have one NUTS level 2 region: Estonia, Cyprus, Latvia, Lithuania, Luxembourg, Malta and Iceland. Thus, for these countries the projected population data for NUTS level 2 region are identical to national data.
    • 五月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 24 六月, 2016
      选择数据集
      Europop2013, the latest population projections released by Eurostat, provide a set of different scenarios for possible population developments at national and at regional levels across 31 European countries: for each EU-28 Member State as well as for Iceland, Norway and Switzerland. These population projections were produced using data for 1 January 2013 as a starting point and therefore include any modifications made to demographic statistics resulting from the 2011 population census exercise. They were developed based on application of a main input dataset of assumptions on future developments for fertility, mortality and net migration (including statistical adjustment) covering the time period 2013 to 2080. Europop2013 at national level includes detailed statistical information related to the main scenario and its four variants with reference to:projected population on 1 January by age and sex;assumptions datasets: age-specific fertility rates, age-specific mortality rates and international net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex for the main scenario and the higher life expectancy variant;total numbers of the projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population;the time horizon covered is from 2013 until 2080 for the main scenario and no migration variant, and from 2013 until 2060 for the higher life expectancy, reduced migration and lower fertility variants. Europop2013 at regional level covers all the regions classified as NUTS level 2 and NUTS level 3 corresponding to the NUTS-2010 classification (the Nomenclature of Territorial Units for Statistics) and to the Statistical Regions (SR) agreed between European Commission and Iceland, Norway and Switzerland. The statistical information included for each NUTS level relates to the main scenario and is summarised below: Europop2013 for NUTS level 2 regions:projected population on 1 January by age and sex;assumptions datasets: age-specific fertility rates, age-specific mortality rates and net migration figures (including statistical adjustment); the assumptions datasets on age-specific fertility rates and age-specific mortality rates for each region at NUTS level 2 were further on used as such for producing the population projections for its component regions at NUTS level 3;approximated values of the life expectancy by age and sex;total numbers of projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population;the time horizon covered is from 2013 until 2080;data available are rounded therefore the sum of regional figures for populations and for net migrations will differ from the national ones by few units;287 regions classified as NUTS and SR level 2. Due to the relative small population the following countries have one NUTS level 2 region: Estonia, Cyprus, Latvia, Lithuania, Luxembourg, Malta and Iceland. Thus, for these countries the projected population data for NUTS level 2 region are identical to national data. Europop2013 for NUTS level 3 regions:projected population on 1 January by age and sex;the time horizon covered is from 2014 until 2050;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population;assumptions dataset on international net migration figures (including statistical adjustment);data available are rounded therefore the sum of regional figures for populations will differ from the upper NUTS level 2 ones by few units;1362 regions classified as NUTS and SR level 3. Due to the relative small population Cyprus and Luxembourg have only one NUTS level 3 region. Thus, for these two countries the projected population data at NUTS level 3 are identical to the ones at NUTS level 2 and at national level.
    • 九月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 03 十一月, 2015
      选择数据集
      Europop2013, the latest population projections released by Eurostat, provide a set of different scenarios for possible population developments at national and regional levels across 31 European countries: all of the EU-28 Member States, as well as Iceland, Norway and Switzerland. These population projections were produced using data for 1 January 2013 as a starting point and therefore include any modifications made to demographic statistics resulting from the 2011 population census exercise. They were developed based on application of a main input dataset of assumptions on future developments for fertility, mortality and net migration covering the time period 2013 to 2080. Europop2013 at national level includes detailed statistical information related to the main scenario and its four variants with reference to: projected population on 1st January by age and sex;assumptions datasets: age-specific fertility rates, age-specific mortality rates and international net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex for main scenario and higher life expectancy variant;total numbers of projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population.the time horizon covered is from 2013 until 2080 for the main scenario and no migration variant, and from 2013 until 2060 for the higher life expectancy, reduced migration and lower fertility variants. Europop2013 at regional level includes statistical information related to the main scenario with reference to: projected population on 1st January by age and sex;assumptions dataset: age-specific fertility rates, age-specific mortality rates and net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex;total numbers of projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population.the time horizon covered is from 2013 until 2080.data available are rounded therefore the sum of regional figures for populations and for net migrations will differ from the national ones by few units.287 regions classified as NUTS level 2 corresponding to NUTS-2010 classification (the Nomenclature of Territorial Units for Statistics) and to the Statistical Regions agreed between European Commission and Iceland, Norway and Switzerland. Due to the relative small population the following countries have one NUTS level 2 region: Estonia, Cyprus, Latvia, Lithuania, Luxembourg, Malta and Iceland. Thus, for these countries the projected population data for NUTS level 2 region are identical to national data.
    • 一月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 23 一月, 2016
      选择数据集
      Europop2013, the latest population projections released by Eurostat, provide a set of different scenarios for possible population developments at national and at regional levels across 31 European countries: for each EU-28 Member State as well as for Iceland, Norway and Switzerland. These population projections were produced using data for 1 January 2013 as a starting point and therefore include any modifications made to demographic statistics resulting from the 2011 population census exercise. They were developed based on application of a main input dataset of assumptions on future developments for fertility, mortality and net migration (including statistical adjustment) covering the time period 2013 to 2080. Europop2013 at national level includes detailed statistical information related to the main scenario and its four variants with reference to: projected population on 1 January by age and sex;assumptions datasets: age-specific fertility rates, age-specific mortality rates and international net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex for the main scenario and the higher life expectancy variant;total numbers of the projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population;the time horizon covered is from 2013 until 2080 for the main scenario and no migration variant, and from 2013 until 2060 for the higher life expectancy, reduced migration and lower fertility variants.Europop2013 at regional level covers all the regions classified as NUTS level 2 and NUTS level 3 corresponding to the NUTS-2010 classification (the Nomenclature of Territorial Units for Statistics) and to the Statistical Regions (SR) agreed between European Commission and Iceland, Norway and Switzerland. The statistical information included for each NUTS level relates to the main scenario and is summarised below: Europop2013 for NUTS level 2 regions:projected population on 1 January by age and sex;assumptions dataset: age-specific fertility rates, age-specific mortality rates and net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex;total numbers of projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population;the time horizon covered is from 2013 until 2080;data available are rounded therefore the sum of regional figures for populations and for net migrations will differ from the national ones by few units;287 regions classified as NUTS and SR level 2. Due to the relative small population the following countries have one NUTS level 2 region: Estonia, Cyprus, Latvia, Lithuania, Luxembourg, Malta and Iceland. Thus, for these countries the projected population data for NUTS level 2 region are identical to national data.Europop2013 for NUTS level 3 regions:projected population on 1 January by age and sex;the time horizon covered is from 2014 until 2050;data available are rounded therefore the sum of regional figures for populations will differ from the upper NUTS level 2 ones by few units;1361 regions classified as NUTS and SR level 3. Due to the relative small population Cyprus and Luxembourg have only one NUTS level 3 region. Thus, for these two countries the projected population data at NUTS level 3 are identical to the ones at NUTS level 2 and at national level.
    • 九月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 03 十一月, 2015
      选择数据集
      Europop2013, the latest population projections released by Eurostat, provide a set of different scenarios for possible population developments at national and regional levels across 31 European countries: all of the EU-28 Member States, as well as Iceland, Norway and Switzerland. These population projections were produced using data for 1 January 2013 as a starting point and therefore include any modifications made to demographic statistics resulting from the 2011 population census exercise. They were developed based on application of a main input dataset of assumptions on future developments for fertility, mortality and net migration covering the time period 2013 to 2080. Europop2013 at national level includes detailed statistical information related to the main scenario and its four variants with reference to: projected population on 1st January by age and sex;assumptions datasets: age-specific fertility rates, age-specific mortality rates and international net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex for main scenario and higher life expectancy variant;total numbers of projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population.the time horizon covered is from 2013 until 2080 for the main scenario and no migration variant, and from 2013 until 2060 for the higher life expectancy, reduced migration and lower fertility variants. Europop2013 at regional level includes statistical information related to the main scenario with reference to: projected population on 1st January by age and sex;assumptions dataset: age-specific fertility rates, age-specific mortality rates and net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex;total numbers of projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population.the time horizon covered is from 2013 until 2080.data available are rounded therefore the sum of regional figures for populations and for net migrations will differ from the national ones by few units.287 regions classified as NUTS level 2 corresponding to NUTS-2010 classification (the Nomenclature of Territorial Units for Statistics) and to the Statistical Regions agreed between European Commission and Iceland, Norway and Switzerland. Due to the relative small population the following countries have one NUTS level 2 region: Estonia, Cyprus, Latvia, Lithuania, Luxembourg, Malta and Iceland. Thus, for these countries the projected population data for NUTS level 2 region are identical to national data.
    • 五月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 27 六月, 2016
      选择数据集
      Europop2013, the latest population projections released by Eurostat, provide a set of different scenarios for possible population developments at national and at regional levels across 31 European countries: for each EU-28 Member State as well as for Iceland, Norway and Switzerland. These population projections were produced using data for 1 January 2013 as a starting point and therefore include any modifications made to demographic statistics resulting from the 2011 population census exercise. They were developed based on application of a main input dataset of assumptions on future developments for fertility, mortality and net migration (including statistical adjustment) covering the time period 2013 to 2080. Europop2013 at national level includes detailed statistical information related to the main scenario and its four variants with reference to:projected population on 1 January by age and sex;assumptions datasets: age-specific fertility rates, age-specific mortality rates and international net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex for the main scenario and the higher life expectancy variant;total numbers of the projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population;the time horizon covered is from 2013 until 2080 for the main scenario and no migration variant, and from 2013 until 2060 for the higher life expectancy, reduced migration and lower fertility variants. Europop2013 at regional level covers all the regions classified as NUTS level 2 and NUTS level 3 corresponding to the NUTS-2010 classification (the Nomenclature of Territorial Units for Statistics) and to the Statistical Regions (SR) agreed between European Commission and Iceland, Norway and Switzerland. The statistical information included for each NUTS level relates to the main scenario and is summarised below: Europop2013 for NUTS level 2 regions:projected population on 1 January by age and sex;assumptions datasets: age-specific fertility rates, age-specific mortality rates and net migration figures (including statistical adjustment); the assumptions datasets on age-specific fertility rates and age-specific mortality rates for each region at NUTS level 2 were further on used as such for producing the population projections for its component regions at NUTS level 3;approximated values of the life expectancy by age and sex;total numbers of projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population;the time horizon covered is from 2013 until 2080;data available are rounded therefore the sum of regional figures for populations and for net migrations will differ from the national ones by few units;287 regions classified as NUTS and SR level 2. Due to the relative small population the following countries have one NUTS level 2 region: Estonia, Cyprus, Latvia, Lithuania, Luxembourg, Malta and Iceland. Thus, for these countries the projected population data for NUTS level 2 region are identical to national data. Europop2013 for NUTS level 3 regions:projected population on 1 January by age and sex;the time horizon covered is from 2014 until 2050;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population;assumptions dataset on international net migration figures (including statistical adjustment);data available are rounded therefore the sum of regional figures for populations will differ from the upper NUTS level 2 ones by few units;1362 regions classified as NUTS and SR level 3. Due to the relative small population Cyprus and Luxembourg have only one NUTS level 3 region. Thus, for these two countries the projected population data at NUTS level 3 are identical to the ones at NUTS level 2 and at national level.
    • 二月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 19 二月, 2019
      选择数据集
      Data on manure storage facilities are gathered through the Farm Structure Surveys (FSS) conducted by Member States accordingly to the specific community legislation. The variables presented in this table are the following: Holdings with manure storage facilitiesHoldings with storage facilities for solid dung Holdings with storage facilities for liquid manure Holdings with storage facilities for slurry Holdings with storage facilities for slurry: tank Holdings with storage facilities for slurry: lagoon Holdings with covered storage facilities for solid dung Holdings with covered storage facilities for liquid manure Holdings with covered storage facilities for slurry 
    • 三月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 21 四月, 2014
      选择数据集
      Eurostat Dataset Id:tran_r_mago_om Due to the nature of transport, a spatial reference is built into most legal acts dealing with transport statistics. In a few cases, these sources can be directly used for the derivation of regional transport indicators, while other indicators are collected on a voluntary basis. This is the case of the regional transport data collection in which both data types are used. Three types of regional data can be distinguished depending on their source: two are based on data collections performed on the basis of legal acts (the Maritime and Aviation data) and one is a voluntary data collection (infrastructures, vehicles and road accidents). Regional data collected on voluntary basis: The current regional data collection taking place on a voluntary basis comprises a set of transport indicators at NUTS 0, 1 and 2[1] levels for the road, railways, inland waterways (infrastructure), vehicle stocks, road accidents. The information collected is then disseminated in Eurostat dissemination database (Eurobase) under “General and regional statistics/Regional statistics/Regional transport statistics” theme and also mirrored under “Transport/Regional transport statistics” theme. Annual data collection for infrastructure, vehicle stocks and road accidents was launched at the beginning of 2002 covering both Member States and Candidate countries. Since 2007, it includes EFTA countries as well. Regional data are collected directly from the countries using a questionnaire: data on transport infrastructure, vehicle stocks and road accidents (collected previously – till 2006 – on Excel sheets and then – till 2012- using on-line questionnaires). Currently regional datasets are provided via eDAMIS application. For the voluntary data collection via eDAMIS portal, the definitions from the 4th edition of the Glossary for transport statistics(jointly elaborated by Eurostat, ECMT, UNECE) were proposed and countries should use them when transmitting data. Regional data based on legal acts: For the collection based on legal acts, regional data are actually derived from the information provided by the participating countries in the frame of the legal data collections at port and airport level. Maritime transport data collection is legally based – Directive 2009/42/EC of the European Parliament and of the Council of 6 May 2009 on statistical returns in respect of carriage of goods and passengers by sea (OJ L141 of 6.6.2009, page 29), which is the recast of the original Council Directive 95/64/EC of 8 December 1995. Within the collection Maritime transport - data aggregated at standard regional levels (NUTS) there are two tables: Maritime transport of passengers at regional level (new methodology);Maritime transport of freight at regional level (new methodology). Within the collection Air transport - data aggregated at standard regional levels (NUTS) there are two tables: Air transport of passengers at regional levelAir transport of freight at regional level The tables present the evolution of the number of passengers carried (if not available passengers on board) and the volume of freight and mail loaded or unloaded (if not available freight and mail on board) to/from the NUTS regions (level 2, 1 and 0) since 1999. The data is presented at annual level. The air transport regional data have been calculated using data collected at the airport level in the frame of draft Council and Parliament Regulation (Regulation 95/C 325/08 on statistical returns in respect of carriage of passenger, freight and mail by air). [1] Regulation (EC) No 1059/2003 of the European Parliament and of the Council of 26 May 2003 on the establishment of a common classification of territorial units for statistics (NUTS) and its amendments. More information on NUTS clasiffication can be found under the following link.
    • 三月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 21 四月, 2014
      选择数据集
      Eurostat Dataset Id:tran_r_mapa_om Due to the nature of transport, a spatial reference is built into most legal acts dealing with transport statistics. In a few cases, these sources can be directly used for the derivation of regional transport indicators, while other indicators are collected on a voluntary basis. This is the case of the regional transport data collection in which both data types are used. Three types of regional data can be distinguished depending on their source: two are based on data collections performed on the basis of legal acts (the Maritime and Aviation data) and one is a voluntary data collection (infrastructures, vehicles and road accidents). Regional data collected on voluntary basis: The current regional data collection taking place on a voluntary basis comprises a set of transport indicators at NUTS 0, 1 and 2[1] levels for the road, railways, inland waterways (infrastructure), vehicle stocks, road accidents. The information collected is then disseminated in Eurostat dissemination database (Eurobase) under “General and regional statistics/Regional statistics/Regional transport statistics” theme and also mirrored under “Transport/Regional transport statistics” theme. Annual data collection for infrastructure, vehicle stocks and road accidents was launched at the beginning of 2002 covering both Member States and Candidate countries. Since 2007, it includes EFTA countries as well. Regional data are collected directly from the countries using a questionnaire: data on transport infrastructure, vehicle stocks and road accidents (collected previously – till 2006 – on Excel sheets and then – till 2012- using on-line questionnaires). Currently regional datasets are provided via eDAMIS application. For the voluntary data collection via eDAMIS portal, the definitions from the 4th edition of the Glossary for transport statistics(jointly elaborated by Eurostat, ECMT, UNECE) were proposed and countries should use them when transmitting data. Regional data based on legal acts: For the collection based on legal acts, regional data are actually derived from the information provided by the participating countries in the frame of the legal data collections at port and airport level. Maritime transport data collection is legally based – Directive 2009/42/EC of the European Parliament and of the Council of 6 May 2009 on statistical returns in respect of carriage of goods and passengers by sea (OJ L141 of 6.6.2009, page 29), which is the recast of the original Council Directive 95/64/EC of 8 December 1995. Within the collection Maritime transport - data aggregated at standard regional levels (NUTS) there are two tables: Maritime transport of passengers at regional level (new methodology);Maritime transport of freight at regional level (new methodology). Within the collection Air transport - data aggregated at standard regional levels (NUTS) there are two tables: Air transport of passengers at regional levelAir transport of freight at regional level The tables present the evolution of the number of passengers carried (if not available passengers on board) and the volume of freight and mail loaded or unloaded (if not available freight and mail on board) to/from the NUTS regions (level 2, 1 and 0) since 1999. The data is presented at annual level. The air transport regional data have been calculated using data collected at the airport level in the frame of draft Council and Parliament Regulation (Regulation 95/C 325/08 on statistical returns in respect of carriage of passenger, freight and mail by air). [1] Regulation (EC) No 1059/2003 of the European Parliament and of the Council of 26 May 2003 on the establishment of a common classification of territorial units for statistics (NUTS) and its amendments. More information on NUTS clasiffication can be found under the following link.
    • 五月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 五月, 2019
      选择数据集
      Due to the nature of transport, a spatial reference is built into most legal acts dealing with transport statistics. In a few cases, these sources can be directly used for the derivation of regional transport indicators, while other indicators are collected on a voluntary basis. This is the case of the regional transport data collection in which both data types are used. Three types of regional data can be distinguished depending on their source: two are based on data collections performed on the basis of legal acts (the Maritime and Aviation data) and one is a voluntary data collection (infrastructures, vehicles and road accidents). Regional data collected on voluntary basis: The current regional data collection taking place on a voluntary basis comprises a set of transport indicators at NUTS 0, 1 and 2[1] levels for the road, railways, inland waterways (infrastructure), vehicle stocks, road accidents. The information collected is then disseminated in Eurostat dissemination database (Eurobase) under “General and regional statistics/Regional statistics by NUTS classification/Regional transport statistics” theme and also mirrored under “Transport/Multimodal data/Regional transport statistics” theme. Annual data collection for infrastructure, vehicle stocks and road accidents was launched at the beginning of 2002 covering both Member States and Candidate countries. Since 2007, it includes EFTA countries as well. Regional data are collected directly from the countries using a questionnaire: data on transport infrastructure, vehicle stocks and road accidents (collected previously – till 2006 – on Excel sheets and then – till 2012 – using on-line questionnaires). Currently regional datasets are provided via EDAMIS application. For the voluntary data collection via EDAMIS portal, the definitions from the 4th edition of the Illustrated Glossary for Transport Statistics (jointly elaborated by Eurostat, ECMT, UNECE) were proposed and countries should use them when transmitting data. Regional data based on legal acts: For the collection based on legal acts, regional data are actually derived from the information provided by the participating countries in the frame of the legal data collections at port and airport level. Maritime transport data collection is legally based – Directive 2009/42/EC of the European Parliament and of the Council of 6 May 2009 on statistical returns in respect of carriage of goods and passengers by sea (OJ L141 of 6.6.2009, page 29), which is the recast of the original Council Directive 95/64/EC of 8 December 1995. The air transport regional data have been calculated using data collected at the airport level in the frame of draft Council and Parliament Regulation (Regulation (EC) No 437/2003 of the European Parliament and of the Council of 27 February 2003 on statistical returns in respect of the carriage of passengers, freight and mail by air). Within the collection Maritime transport - data aggregated at standard regional levels (NUTS) there are two tables: Maritime transport of passengers at regional level (new methodology);Maritime transport of freight at regional level (new methodology). Within the collection Air transport - data aggregated at standard regional levels (NUTS) there are two tables: Air transport of passengers at regional levelAir transport of freight at regional level The tables present the evolution of the number of passengers carried (if not available passengers on board) and the volume of freight and mail loaded or unloaded (if not available freight and mail on board) to/from the NUTS regions (level 2, 1 and 0) since 1999. The data is presented at annual level. Before the legal act on air transport statistics was introduced (2003 with 3 years transitional period), air transport statistics have been collected using the statistical questionnaire (voluntary basis). Some countries provided figures for passenger transport taking into account “passengers on board” and some “passenger carried”. Until 2007 reference year, the disseminated numbers of passengers aggregated at regional level are actually a mixture of passengers on board and passengers carried data. The air transport regional data have been calculated using data collected at the airport level in the frame of the regulatory data collection on air transport. Only airports with more than 150 000 passenger units serviced annually are taken into account when aggregating the data at regional levels, because they provide statistics detailed enough to solve the problem of double counting. For each aggregate it is necessary to start at the airport level in order to identify the mirror declarations, i.e. the airport routes for which both airports report the volume, since these constitute the routes where the problem of double counting occurs. When calculating the total volume in such cases, only the departure declarations of the concerned airports have been taken into account. The problem of the double counting only appears for the calculation of the total passengers but not for the total arrivals (respectively total departures), which corresponds to the sum of the arrivals (respectively departures) at each domestic airport. For the tables presenting maritime data at regional level the same aggregation method (exclusion of double counting) is applied taking into account main ports only. Only for these ports (handling more than one million tonnes of goods or recording more than 200 000 passenger movements annually ) the detailed statistics allow such aggregation. For some Member States (up to 1998 data) and for others that joint the EU more recently (up to 2002) transport flows through ports and airports had been collected, via questionnaire. Because of the difference in the methodologies applied, the data for air and maritime transport at regional level up to 2002 reference year are available in separate tablesor some Member States (up to 1998 data) and for others that joint the EU more recently (up to 2002) transport flows through ports and airports had been collected, via questionnaire. Because of the difference in the methodologies applied, the data for air and maritime transport at regional level up to 2002 reference year are avilable in separate tables (listed below) and are no longer updated: Maritime transport of passengers by NUTS 2 regions (questionnaire) (tran_r_mapa_om).Maritime transport of freight by NUTS 2 regions (questionnaire) (tran_r_mago_om).Air transport of passengers by NUTS 2 regions (questionnaire) (tran_r_avpa_om).Air transport of freight by NUTS 2 regions (questionnaire) (tran_r_avgo_om). [1] Regulation (EC) No 1059/2003 of the European Parliament and of the Council of 26 May 2003 on the establishment of a common classification of territorial units for statistics (NUTS) and its amendments. More information on NUTS classification can be found under the following link.
    • 五月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 10 六月, 2019
      选择数据集
    • 三月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 11 三月, 2016
      选择数据集
      Yearly data on “Regional municipal waste collection and treatment” collected biennially by means of the REQ – Regional environmental questionnaire Data aggregation: regional data on NUTS2 level.
  • N
    • 十一月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 05 十一月, 2019
      选择数据集
      Accommodation statistics are a key part of the system of tourism statistics in the EU and have a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases data are compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 十一月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 10 十一月, 2019
      选择数据集
      Accommodation statistics are a key part of the system of tourism statistics in the EU and have a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases data are compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 十一月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 10 十一月, 2019
      选择数据集
      Accommodation statistics are a key part of the system of tourism statistics in the EU and have a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases data are compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 十一月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 05 十一月, 2019
      选择数据集
      A night spent is each night a guest/tourist (resident or non-resident) actually spends (sleeps or stays) or is registered (his/her physical presence there being unnecessary) in a tourist accommodation establishment.
    • 十一月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 10 十一月, 2019
      选择数据集
      Accommodation statistics are a key part of the system of tourism statistics in the EU and have a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases data are compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 五月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 06 五月, 2019
      选择数据集
      On the basis of the Regulation on waste statistics (EC) No. 2150/2002, amended by Commission Regulation (EU) No. 849/2010, data on the generation and treatment of waste is collected from the Member States. The information on waste generation has a breakdown in sources (19 business activities according to the NACE classification and household activities) and in waste categories (according to the European Waste Classification for statistical purposes). The information on waste treatment is broken down to five treatment types (recovery, incineration with energy recovery, other incineration, disposal on land and land treatment) and in waste categories. All values are measured in tonnes of waste and in kg per capita, based on the annual average of the population. The Member States are free to decide on the data collection methods. The general options are: surveys, administrative sources, statistical estimations or some combination of methods. For the first reference year 2004 Member States could apply for permission not to deliver part of the information: waste generated by agriculture and fishing and waste generated in the services sector. For this reason this information is missing for some of the countries. Previously data on waste was collected on a voluntary basis with the joint OECD/Eurostat questionnaire on waste.
    • 三月 2013
      来源: Eurostat
      上传者: Knoema
      访问日期: 24 十一月, 2013
      选择数据集
      Eurostat Dataset Id:demo_r_mdie The regional demographic statistics provides annual data on population, vital events (live births and deaths), total and land areas of the regions and key demographic indicators for regions and statistical regions at NUTS2 and NUTS3 levels for 35 countries: each EU-27 Member State, Acceding, Candidate and EFTA countries. The completeness of the tables depends on the availability of data received from the responsible national statistical institutes (NSIs).  The label of each table indicates the lowest NUTS level for which data are available; for the upper NUTS levels data are included as well. Starting with March 2013, demographic statistics at regional level reflect the new NUTS-2010 classification for EU-27 Member States and the new statistical regions for Croatia. Countries affected by the NUTS-2010 changes are expected to transmit to Eurostat the time series for the new regional breakdown. As a general approach, the regions with no data available are not listed in the tables. For a calendar year T, the deadline of the regional demographic data collection is 15 December, and data included have a different degree of detail for regions at NUTS2 and NUTS3 levels: NUTS2 level - high level of data detail:Population by sex and single year of age at 1st January: years T and T-1Live births by single year of age and year of birth of the mother: year T-1 Deaths by sex and single years of age and year of birth: year T-1  NUTS3 level - low level of data detail:Surface area in km2 at 1st January (total area including inland waters and land area): year TPopulation by sex and broad age groups at 1st January, namely for 0-14 (0 up to 14 years), 15-64 (15 up to 64 years) and 65+ (persons of 65 years and older): years T and T-1 Live births and deaths (total number of demographic events): year T-1  Tables are updated mainly during March of the next year (T+1), but also along the year whenever revised data are sent by the official data providers. Demographic indicators at regional level are computed by Eurostat using a harmonised methodology and common concepts for all regions of all countries, namely:average population on 1st January (in thousands), population density;demographic balance and crude rates (population change, natural change, net migration including statistical adjustments, crude birth rate, crude death rate, crude rate of population change, crude rate of natural change, crude rate of net migration (including statistical adjustments));age-specific-fertility rates and Total Fertility Rates;life tables that include age-specific-mortality-rates and life expectancy at given exact age;infant mortality and crude rate of infant mortality. At national level a larger number of demographic indicators are computed, as more detailed demographic data are collected only at this level. 
    • 三月 2013
      来源: Eurostat
      上传者: Knoema
      访问日期: 24 十一月, 2013
      选择数据集
      Eurostat Dataset Id:demo_r_msurv The regional demographic statistics provides annual data on population, vital events (live births and deaths), total and land areas of the regions and key demographic indicators for regions and statistical regions at NUTS2 and NUTS3 levels for 35 countries: each EU-27 Member State, Acceding, Candidate and EFTA countries. The completeness of the tables depends on the availability of data received from the responsible national statistical institutes (NSIs).  The label of each table indicates the lowest NUTS level for which data are available; for the upper NUTS levels data are included as well. Starting with March 2013, demographic statistics at regional level reflect the new NUTS-2010 classification for EU-27 Member States and the new statistical regions for Croatia. Countries affected by the NUTS-2010 changes are expected to transmit to Eurostat the time series for the new regional breakdown. As a general approach, the regions with no data available are not listed in the tables. For a calendar year T, the deadline of the regional demographic data collection is 15 December, and data included have a different degree of detail for regions at NUTS2 and NUTS3 levels: NUTS2 level - high level of data detail:Population by sex and single year of age at 1st January: years T and T-1Live births by single year of age and year of birth of the mother: year T-1 Deaths by sex and single years of age and year of birth: year T-1  NUTS3 level - low level of data detail:Surface area in km2 at 1st January (total area including inland waters and land area): year TPopulation by sex and broad age groups at 1st January, namely for 0-14 (0 up to 14 years), 15-64 (15 up to 64 years) and 65+ (persons of 65 years and older): years T and T-1 Live births and deaths (total number of demographic events): year T-1  Tables are updated mainly during March of the next year (T+1), but also along the year whenever revised data are sent by the official data providers. Demographic indicators at regional level are computed by Eurostat using a harmonised methodology and common concepts for all regions of all countries, namely:average population on 1st January (in thousands), population density;demographic balance and crude rates (population change, natural change, net migration including statistical adjustments, crude birth rate, crude death rate, crude rate of population change, crude rate of natural change, crude rate of net migration (including statistical adjustments));age-specific-fertility rates and Total Fertility Rates;life tables that include age-specific-mortality-rates and life expectancy at given exact age;infant mortality and crude rate of infant mortality. At national level a larger number of demographic indicators are computed, as more detailed demographic data are collected only at this level. 
    • 十一月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 15 十一月, 2019
      选择数据集
      A tourist accommodation establishment is defined as any facility that regularly or occasionally provides short-term accommodation for tourists as a paid service (although the price might be partially or fully subsidised). Data is reported at the level of a local kind-of-activity unit. The number of bed places in a tourist accommodation establishment is determined by the number of persons who can stay overnight in the beds set up in the establishment, ignoring any extra beds that may be set up upon customer request. The term bed place applies to a single bed; a double bed is counted as two bed places.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 13 十月, 2019
      选择数据集
      Accommodation statistics are a key part of the system of tourism statistics in the EU and have a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases data are compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 06 十月, 2019
      选择数据集
      Accommodation statistics are a key part of the system of tourism statistics in the EU and have a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases data are compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 06 十月, 2019
      选择数据集
      Accommodation statistics are a key part of the system of tourism statistics in the EU and have a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases data are compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 五月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 10 十二月, 2015
      选择数据集
      Accommodation statistics is a key part of the system of tourism statistics in the EU and has a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases the data is compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 四月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 05 五月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2010
      来源: Eurostat
      上传者: Knoema
      访问日期: 28 十一月, 2015
      选择数据集
      Structural business statistics (SBS) describes the structure, conduct and performance of economic activities, down to the most detailed activity level (several hundred economic sectors). SBS are transmitted annually by the EU Member States on the basis of a legal obligation from 1995 onwards.   SBS covers all activities of the business economy with the exception of agricultural activities and personal services and the data are provided by all EU Member States, Norway and Switzerland, some candidate and potential candidate countries. The data are collected by domain of activity (annex) : Annex I - Services, Annex II - Industry, Annex III - Trade and Annex IV- Constructions and by datasets. Each annex contains several datasets as indicated in the SBS Regulation. The majority of the data is collected by National Statistical Institutes (NSIs) by means of statistical surveys, business registers or from various administrative sources. Regulatory or controlling national offices for financial institutions or central banks often provide the information required for the financial sector (NACE Rev 2 Section K / NACE Rev 1.1 Section J). Member States apply various statistical methods, according to the data source, such as grossing up, model based estimation or different forms of imputation, to ensure the quality of SBSs produced. Main characteristics (variables) of the SBS data category: Business Demographic variables (e.g. Number of enterprises)"Output related" variables (e.g. Turnover, Value added)"Input related" variables: labour input (e.g. Employment, Hours worked); goods and services input (e.g. Total of purchases); capital input (e.g. Material investments) All SBS characteristics are published on Eurostat’s website by tables and an example of the existent tables is presented below: Annual enterprise statistics: Characteristics collected are published by country and detailed on NACE Rev 2 and NACE Rev 1.1 class level (4-digits). Some classes or groups in 'services' section have been aggregated.Annual enterprise statistics broken down by size classes: Characteristics are published by country and detailed down to NACE Rev 2 and NACE Rev 1.1 group level (3-digits) and employment size class. For trade (NACE Rev 2 and NACE Rev 1.1 Section G) a supplementary breakdown by turnover size class is available.Annual regional statistics: Four characteristics are published by NUTS-2 country region and detailed on NACE Rev 2 and NACE Rev 1.1 division level (2-digits) (but to group level (3-digits) for the trade section). More information on the contents of different tables: the detail level and breakdowns required starting with the reference year 2008 is defined in Commission Regulation N° 251/2009. For previous reference years it is included in Commission Regulations (EC) N° 2701/98 and amended by Commission Regulation N°1614/2002 and Commission Regulation N°1669/2003. Several important derived indicators are generated in the form of ratios of certain monetary characteristics or per head values. A list with the available derived indicators is available below in the Annex.
  • O
    • 五月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 08 六月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 一月 2017
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 一月, 2017
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 四月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 24 十一月, 2015
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
  • P
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 11 十月, 2019
      选择数据集
      The aim of this section is to provide comparable statistics and indicators on education in the 27 Member States of the European Union, at the regional level NUTS 2. In order to facilitate comparison between countries, data from each Member State are allocated to the various education levels of the International Standard Classification of Education (ISCED), UNESCO 1997.
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 13 七月, 2019
      选择数据集
      The aim of this section is to provide comparable statistics and indicators on education in the 27 Member States of the European Union, at the regional level NUTS 2. In order to facilitate comparison between countries, data from each Member State are allocated to the various education levels of the International Standard Classification of Education (ISCED), UNESCO 1997.
    • 十月 2018
      来源: Eurostat
      上传者: Knoema
      访问日期: 03 十一月, 2018
      选择数据集
      The aim of this section is to provide comparable statistics and indicators on education in the 27 Member States of the European Union, at the regional level NUTS 2. In order to facilitate comparison between countries, data from each Member State are allocated to the various education levels of the International Standard Classification of Education (ISCED), UNESCO 1997.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 07 九月, 2019
      选择数据集
      The aim of this section is to provide comparable statistics and indicators on education in the 27 Member States of the European Union, at the regional level NUTS 2. In order to facilitate comparison between countries, data from each Member State are allocated to the various education levels of the International Standard Classification of Education (ISCED), UNESCO 1997.
    • 四月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 10 五月, 2016
      选择数据集
    • 十月 2018
      来源: Eurostat
      上传者: Knoema
      访问日期: 03 十一月, 2018
      选择数据集
      Data refer to applications filed directly under the European Patent Convention or to applications filed under the Patent Co-operation Treaty and designated to the EPO (Euro-PCT). Patent applications are counted according to the year in which they were filed at the EPO and are broken down according to the International Patent Classification (IPC). They are also broken down according to the inventor's place of residence, using fractional counting if multiple inventors or IPC classes are provided to avoid double counting.
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 04 七月, 2019
      选择数据集
      The internet connection used is a broadband connection (ADSL, SHDSL, cable, UMTS, etc).
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 25 十月, 2019
      选择数据集
      Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, Iceland, Norway, Liechtenstein, Switzerland, Serbia and Turkey. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.
    • 三月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 29 十一月, 2015
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 一月 2017
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 一月, 2017
      选择数据集
      The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 九月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 三月 2014
      来源: Eurostat
      上传者: Knoema
      访问日期: 08 五月, 2014
      选择数据集
      Eurostat Dataset Id:demo_r_mpyliv The regional demographic statistics provides annual data on population, vital events (live births and deaths), total and land areas of the regions and key demographic indicators for regions and statistical regions at NUTS2 and NUTS3 levels for 35 countries: each EU-27 Member State, Acceding, Candidate and EFTA countries. The completeness of the tables depends on the availability of data received from the responsible national statistical institutes (NSIs).  The label of each table indicates the lowest NUTS level for which data are available; for the upper NUTS levels data are included as well. Starting with March 2013, demographic statistics at regional level reflect the new NUTS-2010 classification for EU-27 Member States and the new statistical regions for Croatia. Countries affected by the NUTS-2010 changes are expected to transmit to Eurostat the time series for the new regional breakdown. As a general approach, the regions with no data available are not listed in the tables. For a calendar year T, the deadline of the regional demographic data collection is 15 December, and data included have a different degree of detail for regions at NUTS2 and NUTS3 levels: NUTS2 level - high level of data detail: Population by sex and single year of age at 1st January: years T and T-1Live births by single year of age and year of birth of the mother: year T-1 Deaths by sex and single years of age and year of birth: year T-1  NUTS3 level - low level of data detail: Surface area in km2 at 1st January (total area including inland waters and land area): year TPopulation by sex and broad age groups at 1st January, namely for 0-14 (0 up to 14 years), 15-64 (15 up to 64 years) and 65+ (persons of 65 years and older): years T and T-1 Live births and deaths (total number of demographic events): year T-1  Tables are updated mainly during March of the next year (T+1), but also along the year whenever revised data are sent by the official data providers. Demographic indicators at regional level are computed by Eurostat using a harmonised methodology and common concepts for all regions of all countries, namely: average population on 1st January (in thousands), population density;demographic balance and crude rates (population change, natural change, net migration including statistical adjustments, crude birth rate, crude death rate, crude rate of population change, crude rate of natural change, crude rate of net migration (including statistical adjustments));age-specific-fertility rates and Total Fertility Rates;life tables that include age-specific-mortality-rates and life expectancy at given exact age;infant mortality and crude rate of infant mortality. At national level a larger number of demographic indicators are computed, as more detailed demographic data are collected only at this level.Â
    • 八月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 28 八月, 2019
      选择数据集
      Non-expenditure health care data provide information on institutions providing health care in countries, on resources used and on output produced in the framework of health care provision. Data on health care form a major element of public health information as they describe the capacities available for different types of health care provision as well as potential 'bottlenecks' observed. The quantity and quality of health care services provided and the work sharing established between the different institutions are a subject of ongoing debate in all countries. Sustainability - continuously providing the necessary monetary and personal resources needed - and meeting the challenges of ageing societies are the primary perspectives used when analysing and using the data. The resource-related data refer to both human and technical resources, i.e. they relate to: - Health care staff: 'manpower' active in the health care sector (doctors, dentists, nurses, etc.); - Heath workforce migration: migration movements of doctors and nurses; - Health care facilities: technical capacity dimensions (hospital beds, beds in nursing and residential care facilities, etc.). Annual national and regional data are provided in absolute numbers and in population-standardised rates (per 100 000 inhabitants). Wherever applicable, the definitions and classifications of the System of Health Accounts (SHA) are followed, e.g. International Classification for Health Accounts - Providers of health care (ICHA-HP). For hospital discharges, the International Shortlist for Hospital Morbidity Tabulation (ISHMT) is used. Health care data on resources are largely based on administrative data sources in the countries. Therefore, they reflect the country-specific way of organising health care and may not always be completely comparable.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 九月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 九月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 30 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 16 十月, 2019
      选择数据集
      The aim of this section is to provide comparable statistics and indicators on education in the 27 Member States of the European Union, at the regional level NUTS 2. In order to facilitate comparison between countries, data from each Member State are allocated to the various education levels of the International Standard Classification of Education (ISCED), UNESCO 1997.
    • 十月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 17 十月, 2015
      选择数据集
      The aim of this section is to provide comparable statistics and indicators on education in the 27 Member States of the European Union, at the regional level NUTS 2. In order to facilitate comparison between countries, data from each Member State are allocated to the various education levels of the International Standard Classification of Education (ISCED), UNESCO 1997.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 16 十月, 2019
      选择数据集
      The aim of this section is to provide comparable statistics and indicators on education in the 27 Member States of the European Union, at the regional level NUTS 2. In order to facilitate comparison between countries, data from each Member State are allocated to the various education levels of the International Standard Classification of Education (ISCED), UNESCO 1997.
    • 四月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 02 四月, 2019
      选择数据集
    • 七月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 05 十一月, 2015
      选择数据集
      The 2011 Population and Housing Census marks a milestone in census exercises in Europe. For the first time, European legislation defined in detail a set of harmonised high-quality data from the population and housing censuses conducted in the EU Member States. As a result, the data from the 2011 round of censuses offer exceptional flexibility to cross-tabulate different variables and to provide geographically detailed data. EU Member States have developed different methods to produce these census data.  The national differences reflect the specific national situations in terms of data source availability, as well as the administrative practices and traditions of that country. The EU census legislation respects this diversity. The Regulation of the European Parliament and of the Council on population and housing censuses (Regulation (EC) No 763/2008) is focussed on output harmonisation rather than input harmonisation. Member States are free to assess for themselves how to conduct their 2011 censuses and which data sources, methods and technology should be applied given the national context. This gives the Member States flexibility, in line with the principles of subsidiarity and efficiency, and with the competences of the statistical institutes in the Member States. However, certain important conditions must be met in order to achieve the objective of comparability of census data from different Member States and to assess the data quality: Regulation (EC) No 1201/20092 contains definitions and technical specifications for the census topics (variables) and their breakdowns that are required to achieve Europe-wide comparability. The specifications are based closely on international recommendations and have been designed to provide the best possible information value. The census topics include geographic, demographic, economic and educational characteristics of persons, international and internal migration characteristics as well as household, family and housing characteristics. Regulation (EU) No 519/2010 requires the data outputs that Member States transmit to the Eurostat to comply with a defined programme of statistical data (tabulation) and with set rules concerning the replacement of statistical data. The content of the EU census programme serves major policy needs of the European Union. Regionally, there is a strong focus on the NUTS 2 level. The data requirements are adapted to the level of regional detail. The Regulation does not require transmission of any data that the Member States consider to be confidential. The statistical data must be completed by metadata that will facilitate interpretation of the numerical data, including country-specific definitions plus information on the data sources and on methodological issues. This is necessary in order to achieve the transparency that is a condition for valid interpretation of the data. Users of output-harmonised census data from the EU Member States need to have detailed information on the quality of the censuses and their results. Regulation (EU) No 1151/2010) therefore requires transmission of a quality report containing a systematic description of the data sources used for census purposes in the Member States and of the quality of the census results produced from these sources. A comparably structured quality report for all EU Member States will support the exchange of experience from the 2011 round and become a reference for future development of census methodology (EU legislation on the 2011 Population and Housing Censuses - Explanatory Notes ). In order to ensure proper transmission of the data and metadata and provide user-friendly access to this information, a common technical format is set for transmission for all Member States and for the Commission (Eurostat). The Regulation therefore requires the data to be transmitted in a harmonised structure and in the internationally established SDMX format from every Member State. In order to achieve this harmonised transmission, a new system has been developed – the CENSUS HUB. The Census Hub is a conceptually new system used for the dissemination of the 2011 Census. It is based on the concept of data sharing, where a group of partners (Eurostat on one hand and National Statistical Institutes on the other) agree to provide access to their data according to standard processes, formats and technologies. The Census Hub is a readily-accessible system that provided the following functions: • Data providers (the NSIs) can make data available directly from their systems through a querying system. In parallel, • Data users browse the hub to define a dataset of interest via the above structural metadata and retrieve the dataset from the NSIs. From the data management point of view, the hub is based on agreed hypercubes (data-sets in the form of multi-dimensional aggregations). The hypercubes are not sent to the central system. Instead the following process operates: 1. a user defines a dataset through the web interface of the central hub and requests it; 2. the central hub translates the user request in one or more queries and sends them to the related NSIs’ systems; 3. NSIs’ systems process the query and send the result to the central hub in a standard format; 4. the central hub puts together all the results sent by the NSI systems and presents them in a user-specified format. Â
    • 八月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 31 十二月, 2015
      选择数据集
      The 2011 Population and Housing Census marks a milestone in census exercises in Europe. For the first time, European legislation defined in detail a set of harmonised high-quality data from the population and housing censuses conducted in the EU Member States. As a result, the data from the 2011 round of censuses offer exceptional flexibility to cross-tabulate different variables and to provide geographically detailed data. EU Member States have developed different methods to produce these census data.  The national differences reflect the specific national situations in terms of data source availability, as well as the administrative practices and traditions of that country. The EU census legislation respects this diversity. The Regulation of the European Parliament and of the Council on population and housing censuses (Regulation (EC) No 763/2008) is focussed on output harmonisation rather than input harmonisation. Member States are free to assess for themselves how to conduct their 2011 censuses and which data sources, methods and technology should be applied given the national context. This gives the Member States flexibility, in line with the principles of subsidiarity and efficiency, and with the competences of the statistical institutes in the Member States. However, certain important conditions must be met in order to achieve the objective of comparability of census data from different Member States and to assess the data quality: Regulation (EC) No 1201/20092 contains definitions and technical specifications for the census topics (variables) and their breakdowns that are required to achieve Europe-wide comparability. The specifications are based closely on international recommendations and have been designed to provide the best possible information value. The census topics include geographic, demographic, economic and educational characteristics of persons, international and internal migration characteristics as well as household, family and housing characteristics. Regulation (EU) No 519/2010 requires the data outputs that Member States transmit to the Eurostat to comply with a defined programme of statistical data (tabulation) and with set rules concerning the replacement of statistical data. The content of the EU census programme serves major policy needs of the European Union. Regionally, there is a strong focus on the NUTS 2 level. The data requirements are adapted to the level of regional detail. The Regulation does not require transmission of any data that the Member States consider to be confidential. The statistical data must be completed by metadata that will facilitate interpretation of the numerical data, including country-specific definitions plus information on the data sources and on methodological issues. This is necessary in order to achieve the transparency that is a condition for valid interpretation of the data. Users of output-harmonised census data from the EU Member States need to have detailed information on the quality of the censuses and their results. Regulation (EU) No 1151/2010) therefore requires transmission of a quality report containing a systematic description of the data sources used for census purposes in the Member States and of the quality of the census results produced from these sources. A comparably structured quality report for all EU Member States will support the exchange of experience from the 2011 round and become a reference for future development of census methodology (EU legislation on the 2011 Population and Housing Censuses - Explanatory Notes ). In order to ensure proper transmission of the data and metadata and provide user-friendly access to this information, a common technical format is set for transmission for all Member States and for the Commission (Eurostat). The Regulation therefore requires the data to be transmitted in a harmonised structure and in the internationally established SDMX format from every Member State. In order to achieve this harmonised transmission, a new system has been developed – the CENSUS HUB. The Census Hub is a conceptually new system used for the dissemination of the 2011 Census. It is based on the concept of data sharing, where a group of partners (Eurostat on one hand and National Statistical Institutes on the other) agree to provide access to their data according to standard processes, formats and technologies. The Census Hub is a readily-accessible system that provided the following functions: • Data providers (the NSIs) can make data available directly from their systems through a querying system. In parallel, • Data users browse the hub to define a dataset of interest via the above structural metadata and retrieve the dataset from the NSIs. From the data management point of view, the hub is based on agreed hypercubes (data-sets in the form of multi-dimensional aggregations). The hypercubes are not sent to the central system. Instead the following process operates: 1. a user defines a dataset through the web interface of the central hub and requests it; 2. the central hub translates the user request in one or more queries and sends them to the related NSIs’ systems; 3. NSIs’ systems process the query and send the result to the central hub in a standard format; 4. the central hub puts together all the results sent by the NSI systems and presents them in a user-specified format.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 16 十月, 2019
      选择数据集
      The folder 'population by educational attainment level (edat1)' presents data on the highest level of education successfully completed by the individuals of a given population. The folder 'transition from education to work (edatt)' covers data on young people neither in employment nor in education and training – NEET, early leavers from education and training and the labour status of young people by years since completion of highest level of education. The data shown are calculated as annual averages of quarterly EU Labour Force Survey data (EU-LFS). Up to the reference year 2008, the data source (EU-LFS) is, where necessary, adjusted and enriched in various ways, in accordance with the specificities of an indicator, including the following: correction of the main breaks in the LFS series,estimation of the missing values, i.e. in case of missing quarters, annual results and EU aggregates are estimated using adjusted quarterly national labour force survey data or interpolations of the EU-LFS data with reference to the available quarter(s). Details on the adjustments are available in CIRCABC. The adjustments are applied in the following online tables: Population by educational attainment level (edat1) - Population by educational attainment level, sex and age (%) - main indicators (edat_lfse_03) - Population aged 25-64 by educational attainment level, sex and NUTS 2 regions (%) (edat_lfse_04) - Population aged 30-34 by educational attainment level, sex and NUTS 2 regions (%) (edat_lfse_12) (Other tables shown in the folder 'population by educational attainment level (edat1)' are not adjusted and therefore the results in these tables might differ).Young people by educational and labour status (incl. neither in employment nor in education and training - NEET) (edatt0) – all tablesEarly leavers from education and training (edatt1) – all tablesLabour status of young people by years since completion of highest level of education (edatt2) – all tables LFS ad-hoc module data available in the folder 'transition from education to work (edatt)' are not adjusted. The folder 'transition from education to work (edatt)' also presents one table with quarterly NEET data for the age group 15-24 (lfsi_neet_q). Deviating from the NEET indicator calculation as provided in 3.4, the denominator in this table is the total population of the same age group and sex which explains differences in results. For further information, see the ESMS on "Unemployment - LFS adjusted series".
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 16 十月, 2019
      选择数据集
      The folder 'population by educational attainment level (edat1)' presents data on the highest level of education successfully completed by the individuals of a given population. The folder 'transition from education to work (edatt)' covers data on young people neither in employment nor in education and training – NEET, early leavers from education and training and the labour status of young people by years since completion of highest level of education. The data shown are calculated as annual averages of quarterly EU Labour Force Survey data (EU-LFS). Up to the reference year 2008, the data source (EU-LFS) is, where necessary, adjusted and enriched in various ways, in accordance with the specificities of an indicator, including the following: correction of the main breaks in the LFS series,estimation of the missing values, i.e. in case of missing quarters, annual results and EU aggregates are estimated using adjusted quarterly national labour force survey data or interpolations of the EU-LFS data with reference to the available quarter(s). Details on the adjustments are available in CIRCABC. The adjustments are applied in the following online tables: Population by educational attainment level (edat1) - Population by educational attainment level, sex and age (%) - main indicators (edat_lfse_03) - Population aged 25-64 by educational attainment level, sex and NUTS 2 regions (%) (edat_lfse_04) - Population aged 30-34 by educational attainment level, sex and NUTS 2 regions (%) (edat_lfse_12) (Other tables shown in the folder 'population by educational attainment level (edat1)' are not adjusted and therefore the results in these tables might differ).Young people by educational and labour status (incl. neither in employment nor in education and training - NEET) (edatt0) – all tablesEarly leavers from education and training (edatt1) – all tablesLabour status of young people by years since completion of highest level of education (edatt2) – all tables LFS ad-hoc module data available in the folder 'transition from education to work (edatt)' are not adjusted. The folder 'transition from education to work (edatt)' also presents one table with quarterly NEET data for the age group 15-24 (lfsi_neet_q). Deviating from the NEET indicator calculation as provided in 3.4, the denominator in this table is the total population of the same age group and sex which explains differences in results. For further information, see the ESMS on "Unemployment - LFS adjusted series".
    • 八月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 31 十二月, 2015
      选择数据集
    • 八月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 31 十二月, 2015
      选择数据集
    • 八月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 09 十一月, 2015
      选择数据集
      The 2011 Population and Housing Census marks a milestone in census exercises in Europe. For the first time, European legislation defined in detail a set of harmonised high-quality data from the population and housing censuses conducted in the EU Member States. As a result, the data from the 2011 round of censuses offer exceptional flexibility to cross-tabulate different variables and to provide geographically detailed data. EU Member States have developed different methods to produce these census data.  The national differences reflect the specific national situations in terms of data source availability, as well as the administrative practices and traditions of that country. The EU census legislation respects this diversity. The Regulation of the European Parliament and of the Council on population and housing censuses (Regulation (EC) No 763/2008) is focussed on output harmonisation rather than input harmonisation. Member States are free to assess for themselves how to conduct their 2011 censuses and which data sources, methods and technology should be applied given the national context. This gives the Member States flexibility, in line with the principles of subsidiarity and efficiency, and with the competences of the statistical institutes in the Member States. However, certain important conditions must be met in order to achieve the objective of comparability of census data from different Member States and to assess the data quality: Regulation (EC) No 1201/20092 contains definitions and technical specifications for the census topics (variables) and their breakdowns that are required to achieve Europe-wide comparability. The specifications are based closely on international recommendations and have been designed to provide the best possible information value. The census topics include geographic, demographic, economic and educational characteristics of persons, international and internal migration characteristics as well as household, family and housing characteristics. Regulation (EU) No 519/2010 requires the data outputs that Member States transmit to the Eurostat to comply with a defined programme of statistical data (tabulation) and with set rules concerning the replacement of statistical data. The content of the EU census programme serves major policy needs of the European Union. Regionally, there is a strong focus on the NUTS 2 level. The data requirements are adapted to the level of regional detail. The Regulation does not require transmission of any data that the Member States consider to be confidential. The statistical data must be completed by metadata that will facilitate interpretation of the numerical data, including country-specific definitions plus information on the data sources and on methodological issues. This is necessary in order to achieve the transparency that is a condition for valid interpretation of the data. Users of output-harmonised census data from the EU Member States need to have detailed information on the quality of the censuses and their results. Regulation (EU) No 1151/2010) therefore requires transmission of a quality report containing a systematic description of the data sources used for census purposes in the Member States and of the quality of the census results produced from these sources. A comparably structured quality report for all EU Member States will support the exchange of experience from the 2011 round and become a reference for future development of census methodology (EU legislation on the 2011 Population and Housing Censuses - Explanatory Notes ). In order to ensure proper transmission of the data and metadata and provide user-friendly access to this information, a common technical format is set for transmission for all Member States and for the Commission (Eurostat). The Regulation therefore requires the data to be transmitted in a harmonised structure and in the internationally established SDMX format from every Member State. In order to achieve this harmonised transmission, a new system has been developed – the CENSUS HUB. The Census Hub is a conceptually new system used for the dissemination of the 2011 Census. It is based on the concept of data sharing, where a group of partners (Eurostat on one hand and National Statistical Institutes on the other) agree to provide access to their data according to standard processes, formats and technologies. The Census Hub is a readily-accessible system that provided the following functions: • Data providers (the NSIs) can make data available directly from their systems through a querying system. In parallel, • Data users browse the hub to define a dataset of interest via the above structural metadata and retrieve the dataset from the NSIs. From the data management point of view, the hub is based on agreed hypercubes (data-sets in the form of multi-dimensional aggregations). The hypercubes are not sent to the central system. Instead the following process operates: 1. a user defines a dataset through the web interface of the central hub and requests it; 2. the central hub translates the user request in one or more queries and sends them to the related NSIs’ systems; 3. NSIs’ systems process the query and send the result to the central hub in a standard format; 4. the central hub puts together all the results sent by the NSI systems and presents them in a user-specified format. Â
    • 八月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 09 十一月, 2015
      选择数据集
      The 2011 Population and Housing Census marks a milestone in census exercises in Europe. For the first time, European legislation defined in detail a set of harmonised high-quality data from the population and housing censuses conducted in the EU Member States. As a result, the data from the 2011 round of censuses offer exceptional flexibility to cross-tabulate different variables and to provide geographically detailed data. EU Member States have developed different methods to produce these census data.  The national differences reflect the specific national situations in terms of data source availability, as well as the administrative practices and traditions of that country. The EU census legislation respects this diversity. The Regulation of the European Parliament and of the Council on population and housing censuses (Regulation (EC) No 763/2008) is focussed on output harmonisation rather than input harmonisation. Member States are free to assess for themselves how to conduct their 2011 censuses and which data sources, methods and technology should be applied given the national context. This gives the Member States flexibility, in line with the principles of subsidiarity and efficiency, and with the competences of the statistical institutes in the Member States. However, certain important conditions must be met in order to achieve the objective of comparability of census data from different Member States and to assess the data quality: Regulation (EC) No 1201/20092 contains definitions and technical specifications for the census topics (variables) and their breakdowns that are required to achieve Europe-wide comparability. The specifications are based closely on international recommendations and have been designed to provide the best possible information value. The census topics include geographic, demographic, economic and educational characteristics of persons, international and internal migration characteristics as well as household, family and housing characteristics. Regulation (EU) No 519/2010 requires the data outputs that Member States transmit to the Eurostat to comply with a defined programme of statistical data (tabulation) and with set rules concerning the replacement of statistical data. The content of the EU census programme serves major policy needs of the European Union. Regionally, there is a strong focus on the NUTS 2 level. The data requirements are adapted to the level of regional detail. The Regulation does not require transmission of any data that the Member States consider to be confidential. The statistical data must be completed by metadata that will facilitate interpretation of the numerical data, including country-specific definitions plus information on the data sources and on methodological issues. This is necessary in order to achieve the transparency that is a condition for valid interpretation of the data. Users of output-harmonised census data from the EU Member States need to have detailed information on the quality of the censuses and their results. Regulation (EU) No 1151/2010) therefore requires transmission of a quality report containing a systematic description of the data sources used for census purposes in the Member States and of the quality of the census results produced from these sources. A comparably structured quality report for all EU Member States will support the exchange of experience from the 2011 round and become a reference for future development of census methodology (EU legislation on the 2011 Population and Housing Censuses - Explanatory Notes ). In order to ensure proper transmission of the data and metadata and provide user-friendly access to this information, a common technical format is set for transmission for all Member States and for the Commission (Eurostat). The Regulation therefore requires the data to be transmitted in a harmonised structure and in the internationally established SDMX format from every Member State. In order to achieve this harmonised transmission, a new system has been developed – the CENSUS HUB. The Census Hub is a conceptually new system used for the dissemination of the 2011 Census. It is based on the concept of data sharing, where a group of partners (Eurostat on one hand and National Statistical Institutes on the other) agree to provide access to their data according to standard processes, formats and technologies. The Census Hub is a readily-accessible system that provided the following functions: • Data providers (the NSIs) can make data available directly from their systems through a querying system. In parallel, • Data users browse the hub to define a dataset of interest via the above structural metadata and retrieve the dataset from the NSIs. From the data management point of view, the hub is based on agreed hypercubes (data-sets in the form of multi-dimensional aggregations). The hypercubes are not sent to the central system. Instead the following process operates: 1. a user defines a dataset through the web interface of the central hub and requests it; 2. the central hub translates the user request in one or more queries and sends them to the related NSIs’ systems; 3. NSIs’ systems process the query and send the result to the central hub in a standard format; 4. the central hub puts together all the results sent by the NSI systems and presents them in a user-specified format. Â
    • 八月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 09 十一月, 2015
      选择数据集
      The 2011 Population and Housing Census marks a milestone in census exercises in Europe. For the first time, European legislation defined in detail a set of harmonised high-quality data from the population and housing censuses conducted in the EU Member States. As a result, the data from the 2011 round of censuses offer exceptional flexibility to cross-tabulate different variables and to provide geographically detailed data. EU Member States have developed different methods to produce these census data.  The national differences reflect the specific national situations in terms of data source availability, as well as the administrative practices and traditions of that country. The EU census legislation respects this diversity. The Regulation of the European Parliament and of the Council on population and housing censuses (Regulation (EC) No 763/2008) is focussed on output harmonisation rather than input harmonisation. Member States are free to assess for themselves how to conduct their 2011 censuses and which data sources, methods and technology should be applied given the national context. This gives the Member States flexibility, in line with the principles of subsidiarity and efficiency, and with the competences of the statistical institutes in the Member States. However, certain important conditions must be met in order to achieve the objective of comparability of census data from different Member States and to assess the data quality: Regulation (EC) No 1201/20092 contains definitions and technical specifications for the census topics (variables) and their breakdowns that are required to achieve Europe-wide comparability. The specifications are based closely on international recommendations and have been designed to provide the best possible information value. The census topics include geographic, demographic, economic and educational characteristics of persons, international and internal migration characteristics as well as household, family and housing characteristics. Regulation (EU) No 519/2010 requires the data outputs that Member States transmit to the Eurostat to comply with a defined programme of statistical data (tabulation) and with set rules concerning the replacement of statistical data. The content of the EU census programme serves major policy needs of the European Union. Regionally, there is a strong focus on the NUTS 2 level. The data requirements are adapted to the level of regional detail. The Regulation does not require transmission of any data that the Member States consider to be confidential. The statistical data must be completed by metadata that will facilitate interpretation of the numerical data, including country-specific definitions plus information on the data sources and on methodological issues. This is necessary in order to achieve the transparency that is a condition for valid interpretation of the data. Users of output-harmonised census data from the EU Member States need to have detailed information on the quality of the censuses and their results. Regulation (EU) No 1151/2010) therefore requires transmission of a quality report containing a systematic description of the data sources used for census purposes in the Member States and of the quality of the census results produced from these sources. A comparably structured quality report for all EU Member States will support the exchange of experience from the 2011 round and become a reference for future development of census methodology (EU legislation on the 2011 Population and Housing Censuses - Explanatory Notes ). In order to ensure proper transmission of the data and metadata and provide user-friendly access to this information, a common technical format is set for transmission for all Member States and for the Commission (Eurostat). The Regulation therefore requires the data to be transmitted in a harmonised structure and in the internationally established SDMX format from every Member State. In order to achieve this harmonised transmission, a new system has been developed – the CENSUS HUB. The Census Hub is a conceptually new system used for the dissemination of the 2011 Census. It is based on the concept of data sharing, where a group of partners (Eurostat on one hand and National Statistical Institutes on the other) agree to provide access to their data according to standard processes, formats and technologies. The Census Hub is a readily-accessible system that provided the following functions: • Data providers (the NSIs) can make data available directly from their systems through a querying system. In parallel, • Data users browse the hub to define a dataset of interest via the above structural metadata and retrieve the dataset from the NSIs. From the data management point of view, the hub is based on agreed hypercubes (data-sets in the form of multi-dimensional aggregations). The hypercubes are not sent to the central system. Instead the following process operates: 1. a user defines a dataset through the web interface of the central hub and requests it; 2. the central hub translates the user request in one or more queries and sends them to the related NSIs’ systems; 3. NSIs’ systems process the query and send the result to the central hub in a standard format; 4. the central hub puts together all the results sent by the NSI systems and presents them in a user-specified format. Â
    • 八月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 09 十一月, 2015
      选择数据集
      The 2011 Population and Housing Census marks a milestone in census exercises in Europe. For the first time, European legislation defined in detail a set of harmonised high-quality data from the population and housing censuses conducted in the EU Member States. As a result, the data from the 2011 round of censuses offer exceptional flexibility to cross-tabulate different variables and to provide geographically detailed data. EU Member States have developed different methods to produce these census data.  The national differences reflect the specific national situations in terms of data source availability, as well as the administrative practices and traditions of that country. The EU census legislation respects this diversity. The Regulation of the European Parliament and of the Council on population and housing censuses (Regulation (EC) No 763/2008) is focussed on output harmonisation rather than input harmonisation. Member States are free to assess for themselves how to conduct their 2011 censuses and which data sources, methods and technology should be applied given the national context. This gives the Member States flexibility, in line with the principles of subsidiarity and efficiency, and with the competences of the statistical institutes in the Member States. However, certain important conditions must be met in order to achieve the objective of comparability of census data from different Member States and to assess the data quality: Regulation (EC) No 1201/20092 contains definitions and technical specifications for the census topics (variables) and their breakdowns that are required to achieve Europe-wide comparability. The specifications are based closely on international recommendations and have been designed to provide the best possible information value. The census topics include geographic, demographic, economic and educational characteristics of persons, international and internal migration characteristics as well as household, family and housing characteristics. Regulation (EU) No 519/2010 requires the data outputs that Member States transmit to the Eurostat to comply with a defined programme of statistical data (tabulation) and with set rules concerning the replacement of statistical data. The content of the EU census programme serves major policy needs of the European Union. Regionally, there is a strong focus on the NUTS 2 level. The data requirements are adapted to the level of regional detail. The Regulation does not require transmission of any data that the Member States consider to be confidential. The statistical data must be completed by metadata that will facilitate interpretation of the numerical data, including country-specific definitions plus information on the data sources and on methodological issues. This is necessary in order to achieve the transparency that is a condition for valid interpretation of the data. Users of output-harmonised census data from the EU Member States need to have detailed information on the quality of the censuses and their results. Regulation (EU) No 1151/2010) therefore requires transmission of a quality report containing a systematic description of the data sources used for census purposes in the Member States and of the quality of the census results produced from these sources. A comparably structured quality report for all EU Member States will support the exchange of experience from the 2011 round and become a reference for future development of census methodology (EU legislation on the 2011 Population and Housing Censuses - Explanatory Notes ). In order to ensure proper transmission of the data and metadata and provide user-friendly access to this information, a common technical format is set for transmission for all Member States and for the Commission (Eurostat). The Regulation therefore requires the data to be transmitted in a harmonised structure and in the internationally established SDMX format from every Member State. In order to achieve this harmonised transmission, a new system has been developed – the CENSUS HUB. The Census Hub is a conceptually new system used for the dissemination of the 2011 Census. It is based on the concept of data sharing, where a group of partners (Eurostat on one hand and National Statistical Institutes on the other) agree to provide access to their data according to standard processes, formats and technologies. The Census Hub is a readily-accessible system that provided the following functions: • Data providers (the NSIs) can make data available directly from their systems through a querying system. In parallel, • Data users browse the hub to define a dataset of interest via the above structural metadata and retrieve the dataset from the NSIs. From the data management point of view, the hub is based on agreed hypercubes (data-sets in the form of multi-dimensional aggregations). The hypercubes are not sent to the central system. Instead the following process operates: 1. a user defines a dataset through the web interface of the central hub and requests it; 2. the central hub translates the user request in one or more queries and sends them to the related NSIs’ systems; 3. NSIs’ systems process the query and send the result to the central hub in a standard format; 4. the central hub puts together all the results sent by the NSI systems and presents them in a user-specified format. Â
    • 四月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 02 四月, 2019
      选择数据集
    • 八月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 09 十一月, 2015
      选择数据集
      The 2011 Population and Housing Census marks a milestone in census exercises in Europe. For the first time, European legislation defined in detail a set of harmonised high-quality data from the population and housing censuses conducted in the EU Member States. As a result, the data from the 2011 round of censuses offer exceptional flexibility to cross-tabulate different variables and to provide geographically detailed data. EU Member States have developed different methods to produce these census data.  The national differences reflect the specific national situations in terms of data source availability, as well as the administrative practices and traditions of that country. The EU census legislation respects this diversity. The Regulation of the European Parliament and of the Council on population and housing censuses (Regulation (EC) No 763/2008) is focussed on output harmonisation rather than input harmonisation. Member States are free to assess for themselves how to conduct their 2011 censuses and which data sources, methods and technology should be applied given the national context. This gives the Member States flexibility, in line with the principles of subsidiarity and efficiency, and with the competences of the statistical institutes in the Member States. However, certain important conditions must be met in order to achieve the objective of comparability of census data from different Member States and to assess the data quality: Regulation (EC) No 1201/20092 contains definitions and technical specifications for the census topics (variables) and their breakdowns that are required to achieve Europe-wide comparability. The specifications are based closely on international recommendations and have been designed to provide the best possible information value. The census topics include geographic, demographic, economic and educational characteristics of persons, international and internal migration characteristics as well as household, family and housing characteristics. Regulation (EU) No 519/2010 requires the data outputs that Member States transmit to the Eurostat to comply with a defined programme of statistical data (tabulation) and with set rules concerning the replacement of statistical data. The content of the EU census programme serves major policy needs of the European Union. Regionally, there is a strong focus on the NUTS 2 level. The data requirements are adapted to the level of regional detail. The Regulation does not require transmission of any data that the Member States consider to be confidential. The statistical data must be completed by metadata that will facilitate interpretation of the numerical data, including country-specific definitions plus information on the data sources and on methodological issues. This is necessary in order to achieve the transparency that is a condition for valid interpretation of the data. Users of output-harmonised census data from the EU Member States need to have detailed information on the quality of the censuses and their results. Regulation (EU) No 1151/2010) therefore requires transmission of a quality report containing a systematic description of the data sources used for census purposes in the Member States and of the quality of the census results produced from these sources. A comparably structured quality report for all EU Member States will support the exchange of experience from the 2011 round and become a reference for future development of census methodology (EU legislation on the 2011 Population and Housing Censuses - Explanatory Notes ). In order to ensure proper transmission of the data and metadata and provide user-friendly access to this information, a common technical format is set for transmission for all Member States and for the Commission (Eurostat). The Regulation therefore requires the data to be transmitted in a harmonised structure and in the internationally established SDMX format from every Member State. In order to achieve this harmonised transmission, a new system has been developed – the CENSUS HUB. The Census Hub is a conceptually new system used for the dissemination of the 2011 Census. It is based on the concept of data sharing, where a group of partners (Eurostat on one hand and National Statistical Institutes on the other) agree to provide access to their data according to standard processes, formats and technologies. The Census Hub is a readily-accessible system that provided the following functions: • Data providers (the NSIs) can make data available directly from their systems through a querying system. In parallel, • Data users browse the hub to define a dataset of interest via the above structural metadata and retrieve the dataset from the NSIs. From the data management point of view, the hub is based on agreed hypercubes (data-sets in the form of multi-dimensional aggregations). The hypercubes are not sent to the central system. Instead the following process operates: 1. a user defines a dataset through the web interface of the central hub and requests it; 2. the central hub translates the user request in one or more queries and sends them to the related NSIs’ systems; 3. NSIs’ systems process the query and send the result to the central hub in a standard format; 4. the central hub puts together all the results sent by the NSI systems and presents them in a user-specified format. Â
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 27 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU-LFS (Statistics Explained) webpage. The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However, many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation by territorial typologies, i.e. urban-rural, metropolitan, coastal, mountain, borders and island typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 27 十月, 2019
      选择数据集
      The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU-LFS (Statistics Explained) webpage. The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However, many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation by territorial typologies, i.e. urban-rural, metropolitan, coastal, mountain, borders and island typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.
    • 八月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 09 十一月, 2015
      选择数据集
      The 2011 Population and Housing Census marks a milestone in census exercises in Europe. For the first time, European legislation defined in detail a set of harmonised high-quality data from the population and housing censuses conducted in the EU Member States. As a result, the data from the 2011 round of censuses offer exceptional flexibility to cross-tabulate different variables and to provide geographically detailed data. EU Member States have developed different methods to produce these census data.  The national differences reflect the specific national situations in terms of data source availability, as well as the administrative practices and traditions of that country. The EU census legislation respects this diversity. The Regulation of the European Parliament and of the Council on population and housing censuses (Regulation (EC) No 763/2008) is focussed on output harmonisation rather than input harmonisation. Member States are free to assess for themselves how to conduct their 2011 censuses and which data sources, methods and technology should be applied given the national context. This gives the Member States flexibility, in line with the principles of subsidiarity and efficiency, and with the competences of the statistical institutes in the Member States. However, certain important conditions must be met in order to achieve the objective of comparability of census data from different Member States and to assess the data quality: Regulation (EC) No 1201/20092 contains definitions and technical specifications for the census topics (variables) and their breakdowns that are required to achieve Europe-wide comparability. The specifications are based closely on international recommendations and have been designed to provide the best possible information value. The census topics include geographic, demographic, economic and educational characteristics of persons, international and internal migration characteristics as well as household, family and housing characteristics. Regulation (EU) No 519/2010 requires the data outputs that Member States transmit to the Eurostat to comply with a defined programme of statistical data (tabulation) and with set rules concerning the replacement of statistical data. The content of the EU census programme serves major policy needs of the European Union. Regionally, there is a strong focus on the NUTS 2 level. The data requirements are adapted to the level of regional detail. The Regulation does not require transmission of any data that the Member States consider to be confidential. The statistical data must be completed by metadata that will facilitate interpretation of the numerical data, including country-specific definitions plus information on the data sources and on methodological issues. This is necessary in order to achieve the transparency that is a condition for valid interpretation of the data. Users of output-harmonised census data from the EU Member States need to have detailed information on the quality of the censuses and their results. Regulation (EU) No 1151/2010) therefore requires transmission of a quality report containing a systematic description of the data sources used for census purposes in the Member States and of the quality of the census results produced from these sources. A comparably structured quality report for all EU Member States will support the exchange of experience from the 2011 round and become a reference for future development of census methodology (EU legislation on the 2011 Population and Housing Censuses - Explanatory Notes ). In order to ensure proper transmission of the data and metadata and provide user-friendly access to this information, a common technical format is set for transmission for all Member States and for the Commission (Eurostat). The Regulation therefore requires the data to be transmitted in a harmonised structure and in the internationally established SDMX format from every Member State. In order to achieve this harmonised transmission, a new system has been developed – the CENSUS HUB. The Census Hub is a conceptually new system used for the dissemination of the 2011 Census. It is based on the concept of data sharing, where a group of partners (Eurostat on one hand and National Statistical Institutes on the other) agree to provide access to their data according to standard processes, formats and technologies. The Census Hub is a readily-accessible system that provided the following functions: • Data providers (the NSIs) can make data available directly from their systems through a querying system. In parallel, • Data users browse the hub to define a dataset of interest via the above structural metadata and retrieve the dataset from the NSIs. From the data management point of view, the hub is based on agreed hypercubes (data-sets in the form of multi-dimensional aggregations). The hypercubes are not sent to the central system. Instead the following process operates: 1. a user defines a dataset through the web interface of the central hub and requests it; 2. the central hub translates the user request in one or more queries and sends them to the related NSIs’ systems; 3. NSIs’ systems process the query and send the result to the central hub in a standard format; 4. the central hub puts together all the results sent by the NSI systems and presents them in a user-specified format. Â
    • 七月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 31 十二月, 2015
      选择数据集
      The 2011 Population and Housing Census marks a milestone in census exercises in Europe. For the first time, European legislation defined in detail a set of harmonised high-quality data from the population and housing censuses conducted in the EU Member States. As a result, the data from the 2011 round of censuses offer exceptional flexibility to cross-tabulate different variables and to provide geographically detailed data. EU Member States have developed different methods to produce these census data.  The national differences reflect the specific national situations in terms of data source availability, as well as the administrative practices and traditions of that country. The EU census legislation respects this diversity. The Regulation of the European Parliament and of the Council on population and housing censuses (Regulation (EC) No 763/2008) is focussed on output harmonisation rather than input harmonisation. Member States are free to assess for themselves how to conduct their 2011 censuses and which data sources, methods and technology should be applied given the national context. This gives the Member States flexibility, in line with the principles of subsidiarity and efficiency, and with the competences of the statistical institutes in the Member States. However, certain important conditions must be met in order to achieve the objective of comparability of census data from different Member States and to assess the data quality: Regulation (EC) No 1201/20092 contains definitions and technical specifications for the census topics (variables) and their breakdowns that are required to achieve Europe-wide comparability. The specifications are based closely on international recommendations and have been designed to provide the best possible information value. The census topics include geographic, demographic, economic and educational characteristics of persons, international and internal migration characteristics as well as household, family and housing characteristics. Regulation (EU) No 519/2010 requires the data outputs that Member States transmit to the Eurostat to comply with a defined programme of statistical data (tabulation) and with set rules concerning the replacement of statistical data. The content of the EU census programme serves major policy needs of the European Union. Regionally, there is a strong focus on the NUTS 2 level. The data requirements are adapted to the level of regional detail. The Regulation does not require transmission of any data that the Member States consider to be confidential. The statistical data must be completed by metadata that will facilitate interpretation of the numerical data, including country-specific definitions plus information on the data sources and on methodological issues. This is necessary in order to achieve the transparency that is a condition for valid interpretation of the data. Users of output-harmonised census data from the EU Member States need to have detailed information on the quality of the censuses and their results. Regulation (EU) No 1151/2010) therefore requires transmission of a quality report containing a systematic description of the data sources used for census purposes in the Member States and of the quality of the census results produced from these sources. A comparably structured quality report for all EU Member States will support the exchange of experience from the 2011 round and become a reference for future development of census methodology (EU legislation on the 2011 Population and Housing Censuses - Explanatory Notes ). In order to ensure proper transmission of the data and metadata and provide user-friendly access to this information, a common technical format is set for transmission for all Member States and for the Commission (Eurostat). The Regulation therefore requires the data to be transmitted in a harmonised structure and in the internationally established SDMX format from every Member State. In order to achieve this harmonised transmission, a new system has been developed – the CENSUS HUB. The Census Hub is a conceptually new system used for the dissemination of the 2011 Census. It is based on the concept of data sharing, where a group of partners (Eurostat on one hand and National Statistical Institutes on the other) agree to provide access to their data according to standard processes, formats and technologies. The Census Hub is a readily-accessible system that provided the following functions: • Data providers (the NSIs) can make data available directly from their systems through a querying system. In parallel, • Data users browse the hub to define a dataset of interest via the above structural metadata and retrieve the dataset from the NSIs. From the data management point of view, the hub is based on agreed hypercubes (data-sets in the form of multi-dimensional aggregations). The hypercubes are not sent to the central system. Instead the following process operates: 1. a user defines a dataset through the web interface of the central hub and requests it; 2. the central hub translates the user request in one or more queries and sends them to the related NSIs’ systems; 3. NSIs’ systems process the query and send the result to the central hub in a standard format; 4. the central hub puts together all the results sent by the NSI systems and presents them in a user-specified format.
    • 四月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 03 六月, 2019
      选择数据集
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 22 十月, 2019
      选择数据集
      Each year Eurostat collects demographic data at regional level from 36 countries as part of the Unified Demography (Unidemo) project. UNIDEMO is Eurostat’s main annual demographic data collection and aims to gather information on demography and migration. UNIDEMO collects data at national and regional levels by various breakdowns on: population stocks;vital events (live births and deaths);marriages;divorces; andmigration flows. Each country must send the statistics for the reference year (T) to Eurostat by 31 December of the following calendar year (T+1). Eurostat then publishes the data in March of the calendar year after that (T+2). Demographic data at regional level include statistics on the population at the end of the calendar year and on live births and deaths during that year, according to the official classification for statistics at regional level (NUTS - nomenclature of territorial units for statistics). These data are broken down by NUTS 2 and 3 levels. The current online demographic data refers to the NUTS 2013 classification that subdivides the territory of the European Union into: 98 regions at NUTS level 1;276 at NUTS level 2; and1342 at NUTS level 3. This is in accordance with the following EU legal acts: Article 3 of the Regulation (EU) No 1260/2013 on European demographic statistics and its implementing measures stated in the Regulation (EU) No 205/2014;Regulation (EU) No 868/2014 which is the nomenclature of territorial units for statistics (abbreviated as NUTS);For candidate and EFTA countries the data are collected according to the agreed statistical regions that have been coded in a way that resembles NUTS. The current candidate countries for which data at regional level are collected are Montenegro, the Former Yugoslav Republic of Macedonia, Albania and Turkey. In January 2018, statistical regions were agreed between Eurostat and Serbia, and demographic data at regional level will available as soon as they will be transmitted to Eurostat. Starting with 1 January 2018, a new regional territorial classification entered into force in accordance with the Commission Regulation (EU) 2016/2066. This classification is known as NUTS 2016 classification and the countries affected by regional changes are: Germany, Ireland, France, Lithuania, Hungary, Netherlands, Poland, Finland and the United Kingdom. The demographic data according to this classification will be available starting with March 2019.   The breakdown of demographic data collected at regional level varies depending on the NUTS level. These breakdowns are summarised below, along with the link to the corresponding online table: NUTS 2 levelPopulation by sex, age and region of residence — demo_r_d2janLive births by mother's age, mother's year of birth and mother's region of residence — demo_r_fagecDeaths by sex, age, year of birth and region of residence — demo_r_magecNUTS 3 levelPopulation by sex, five-year age group and region of residence — demo_r_pjangrp3Live births by five-year age group of the mothers and region of residence — demo_r_fagec3Deaths by sex, five-year age group and region of residence — demo_r_magec3 This more detailed breakdown (by five-year age group) of the data collected at NUTS 3 level started with the reference year 2013 and is in accordance with the European laws on demographic statistics. In addition to the regional codes set out in the Regulation (EU) No 868/2014 these online tables include few additional codes that are meant to cover data on persons and events that cannot be allocated to any official NUTS region. These codes are denoted as CCX/CCXX/CCXXX (Not regionalised/Unknown level 1/2/3; CC stands for country code) and are available only for France, Hungary, the Former Yugoslav Republic of Macedonia and Albania, reflecting the raw data as transmitted to Eurostat. For the reference years from 1990 to 2012 all countries sent to Eurostat all the data on a voluntary basis, therefore the completeness of the tables and the length of time series reflect the level of data received from the responsible national statistical institutes’ (NSIs) data provider. As a general remark, a lower data breakdown is available at NUTS 3 level as detailed: the population data are broken down by broad age groups, 0-14, 15-64 and 65 or more, and by sex. The data have this disaggregation since the reference year 2007 for all countries, and even longer for some — demo_r_pjanaggr3data on vital events (live births and deaths) are available only as totals without any further breakdown — demo_r_births and demo_r_deathsDemographic indicators are calculated by Eurostat based on the above raw data using a common methodology for all countries and regions. The regional demographic indicators computed by NUTS level and the corresponding online tables are summarised below: NUTS 2 levelPopulation structure indicators (shares of various population age groups, dependency ratios and median age) — demo_r_pjanind2Total fertility rate (TFR) and age-specific fertility rates (ASFR) — demo_r_frate2Fertility indicators (total fertility rate and mean age of woman at childbirth) — demo_r_find2Life table including life expectancy at a given exact age — demo_r_mlife and demo_r_mlifexpInfant mortality and infant mortality rates — demo_r_minf and demo_r_minfindNUTS 3 levelDemographic balance and crude rates (population change, natural change, net migration including statistical adjustment, crude birth rate, crude death rate, crude rate of population change, crude rate of natural change, crude rate of net migration (including statistical adjustment)) — demo_r_gind3Population structure indicators (shares of various population age groups, dependency ratios and median age) — demo_r_pjanind3Fertility indicators (total fertility rate and mean age of woman at childbirth) — demo_r_find3Population density — demo_r_d3densNotes: 1) All the indicators are computed for all lower NUTS regions included in the tables (e.g. data included in a table at NUTS 3 level will include also the data for NUTS 2, 1 and country levels). 2) Demographic indicators computed by NUTS 2 and 3 levels are calculated using input data that have different age breakdown. Therefore, minor differences can be noted between the values corresponding to the same indicator of the same region classified as NUTS 2, 1 or country level. 3) Since the reference year 2015, Eurostat has stopped collecting data on area; therefore, the table 'Area by NUTS 3 region (demo_r_d3area)' includes data up to the year 2015 included.
    • 七月 2012
      来源: Eurostat
      上传者: Knoema
      访问日期: 11 二月, 2013
      选择数据集
      This Dataset contains 2 tables Births and deaths by NUTS 3 regions (1 000) (demo_r_d3natmo) Infant mortality by NUTS 2 regions (demo_r_d2infmo). Note: Eurostat Hierarchy: General and regional statistics > Population and social conditions > Population (populat) > Demography (pop) > Demography - Regional data (demoreg) > Population change (demo_r_pch)
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 18 十月, 2019
      选择数据集
      Each year Eurostat collects demographic data at regional level from 36 countries as part of the Unified Demography (Unidemo) project. UNIDEMO is Eurostat’s main annual demographic data collection and aims to gather information on demography and migration. UNIDEMO collects data at national and regional levels by various breakdowns on: population stocks;vital events (live births and deaths);marriages;divorces; andmigration flows. Each country must send the statistics for the reference year (T) to Eurostat by 31 December of the following calendar year (T+1). Eurostat then publishes the data in March of the calendar year after that (T+2). Demographic data at regional level include statistics on the population at the end of the calendar year and on live births and deaths during that year, according to the official classification for statistics at regional level (NUTS - nomenclature of territorial units for statistics). These data are broken down by NUTS 2 and 3 levels. The current online demographic data refers to the NUTS 2013 classification that subdivides the territory of the European Union into: 98 regions at NUTS level 1;276 at NUTS level 2; and1342 at NUTS level 3. This is in accordance with the following EU legal acts: Article 3 of the Regulation (EU) No 1260/2013 on European demographic statistics and its implementing measures stated in the Regulation (EU) No 205/2014;Regulation (EU) No 868/2014 which is the nomenclature of territorial units for statistics (abbreviated as NUTS);For candidate and EFTA countries the data are collected according to the agreed statistical regions that have been coded in a way that resembles NUTS. The current candidate countries for which data at regional level are collected are Montenegro, the Former Yugoslav Republic of Macedonia, Albania and Turkey. In January 2018, statistical regions were agreed between Eurostat and Serbia, and demographic data at regional level will available as soon as they will be transmitted to Eurostat. Starting with 1 January 2018, a new regional territorial classification entered into force in accordance with the Commission Regulation (EU) 2016/2066. This classification is known as NUTS 2016 classification and the countries affected by regional changes are: Germany, Ireland, France, Lithuania, Hungary, Netherlands, Poland, Finland and the United Kingdom. The demographic data according to this classification will be available starting with March 2019.   The breakdown of demographic data collected at regional level varies depending on the NUTS level. These breakdowns are summarised below, along with the link to the corresponding online table: NUTS 2 levelPopulation by sex, age and region of residence — demo_r_d2janLive births by mother's age, mother's year of birth and mother's region of residence — demo_r_fagecDeaths by sex, age, year of birth and region of residence — demo_r_magecNUTS 3 levelPopulation by sex, five-year age group and region of residence — demo_r_pjangrp3Live births by five-year age group of the mothers and region of residence — demo_r_fagec3Deaths by sex, five-year age group and region of residence — demo_r_magec3 This more detailed breakdown (by five-year age group) of the data collected at NUTS 3 level started with the reference year 2013 and is in accordance with the European laws on demographic statistics. In addition to the regional codes set out in the Regulation (EU) No 868/2014 these online tables include few additional codes that are meant to cover data on persons and events that cannot be allocated to any official NUTS region. These codes are denoted as CCX/CCXX/CCXXX (Not regionalised/Unknown level 1/2/3; CC stands for country code) and are available only for France, Hungary, the Former Yugoslav Republic of Macedonia and Albania, reflecting the raw data as transmitted to Eurostat. For the reference years from 1990 to 2012 all countries sent to Eurostat all the data on a voluntary basis, therefore the completeness of the tables and the length of time series reflect the level of data received from the responsible national statistical institutes’ (NSIs) data provider. As a general remark, a lower data breakdown is available at NUTS 3 level as detailed: the population data are broken down by broad age groups, 0-14, 15-64 and 65 or more, and by sex. The data have this disaggregation since the reference year 2007 for all countries, and even longer for some — demo_r_pjanaggr3data on vital events (live births and deaths) are available only as totals without any further breakdown — demo_r_births and demo_r_deathsDemographic indicators are calculated by Eurostat based on the above raw data using a common methodology for all countries and regions. The regional demographic indicators computed by NUTS level and the corresponding online tables are summarised below: NUTS 2 levelPopulation structure indicators (shares of various population age groups, dependency ratios and median age) — demo_r_pjanind2Total fertility rate (TFR) and age-specific fertility rates (ASFR) — demo_r_frate2Fertility indicators (total fertility rate and mean age of woman at childbirth) — demo_r_find2Life table including life expectancy at a given exact age — demo_r_mlife and demo_r_mlifexpInfant mortality and infant mortality rates — demo_r_minf and demo_r_minfindNUTS 3 levelDemographic balance and crude rates (population change, natural change, net migration including statistical adjustment, crude birth rate, crude death rate, crude rate of population change, crude rate of natural change, crude rate of net migration (including statistical adjustment)) — demo_r_gind3Population structure indicators (shares of various population age groups, dependency ratios and median age) — demo_r_pjanind3Fertility indicators (total fertility rate and mean age of woman at childbirth) — demo_r_find3Population density — demo_r_d3densNotes: 1) All the indicators are computed for all lower NUTS regions included in the tables (e.g. data included in a table at NUTS 3 level will include also the data for NUTS 2, 1 and country levels). 2) Demographic indicators computed by NUTS 2 and 3 levels are calculated using input data that have different age breakdown. Therefore, minor differences can be noted between the values corresponding to the same indicator of the same region classified as NUTS 2, 1 or country level. 3) Since the reference year 2015, Eurostat has stopped collecting data on area; therefore, the table 'Area by NUTS 3 region (demo_r_d3area)' includes data up to the year 2015 included.
    • 四月 2016
      来源: Eurostat
      上传者: Knoema
      访问日期: 16 四月, 2016
      选择数据集
    • 十月 2018
      来源: Eurostat
      上传者: Knoema
      访问日期: 03 十一月, 2018
      选择数据集
      This relates to any kind of sewage treatment (primary to tertiary) in municipal treatment plants run by public authorities or by private companies (on behalf of local authorities), whose main purpose is sewage treatment
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 23 十月, 2019
      选择数据集
      The ratio between the annual average population and the land area of the region. The land area concept (excluding inland waters) should be used wherever available; if not available then the total area, including inland waters (area of lakes and rivers) is used.
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 23 十月, 2019
      选择数据集
    • 八月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 05 八月, 2019
      选择数据集
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 29 七月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 17 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 13 九月, 2019
      选择数据集
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 14 九月, 2019
      选择数据集
      The number of persons having their usual residence in a given area (NUTS 2 region) on 1 January. When usually resident population is not available, countries may report legal or registered residents.
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 21 三月, 2019
      选择数据集
    • 三月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 14 五月, 2019
      选择数据集
    • 十一月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 16 十一月, 2019
      选择数据集
      The structure of agricultural holdings (collected through farm structure surveys - FSS) is presented at different geographical levels and over periods. The information follows up the changes in the agricultural sector and provides a basis for decision-making in the Common Agricultural Policy (CAP) and other European Union policies. The survey unit is the agricultural holding (farm). The data on individual agricultural holdings are collected by all Member States, Iceland, Norway and Switzerland and sent to Eurostat.  The Former Yugoslav Republic of Macedonia, Montenegro and Serbia have also provided data for some years. The aggregated results are disseminated through statistical tables. The FSS surveys are organised in all countries in a harmonised way. For a given survey year, countries have to conduct their surveys within the agreed time-frame. Whereas the characteristics are based on Community legislation, the same data are available for all countries in case of each survey. Thus all the data are as comparable as possible.
    • 三月 2009
      来源: Eurostat
      上传者: Knoema
      访问日期: 15 五月, 2014
      选择数据集
      Eurostat Dataset Id:hlth_db_emrena In order to provide data for the European Year of People with Disabilities 2003, the 2002 European Union Labour Force Survey (LFS) contained an ad hoc module concerning the employment of disabled people. The module consisted of 11 variables dealing with the existence, type, cause and duration of longstanding health problem or disability, work limitations (regarding the kind of work or the amount of work, and mobility problems), and assistance needed or provided to work. The results refer to persons aged 16-64 years, living in private households. Disabled persons are those who stated that they had a longstanding health problem or disability (LSHPD) for 6 months or more or expected to last 6 months or more. The indicator used is the percentage prevalence of people with disabilities in various socioeconomic groups as well as the percentage distribution of certain characteristics of disability or of certain socioeconomic characteristics among those reporting disability. The survey was conducted in all the 15 old Member States of the EU as well as in 9 at that time acceding or candidate countries (Czech Republic, Estonia, Cyprus, Latvia, Hungary, Malta, Slovenia, Slovak Republic and Romania) and in Norway.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 27 九月, 2019
      选择数据集
      Regional accounts are a regional specification of the national accounts and therefore based on the same concepts and definitions as national accounts (see domain nama10). The main specific regional issues are addressed in chapter 13 of ESA2010, but not practically specified. For practical rules and recommendations on sources and methods see the publication "Manual on regional accounts methods": http://ec.europa.eu/eurostat/en/web/products-manuals-and-guidelines/-/KS-GQ-13-001 . Gross domestic product (GDP) at market prices is the final result of the production activity of resident producer units. It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expenditure approach cannot be used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees plus gross operating surplus and mixed income plus taxes on products less subsidies plus consumption of fixed capital. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU Member States average.
    • 四月 2015
      来源: Eurostat
      上传者: Knoema
      访问日期: 29 十二月, 2015
      选择数据集
      The 2011 Population and Housing Census marks a milestone in census exercises in Europe. For the first time, European legislation defined in detail a set of harmonised high-quality data from the population and housing censuses conducted in the EU Member States. As a result, the data from the 2011 round of censuses offer exceptional flexibility to cross-tabulate different variables and to provide geographically detailed data. EU Member States have developed different methods to produce these census data.  The national differences reflect the specific national situations in terms of data source availability, as well as the administrative practices and traditions of that country. The EU census legislation respects this diversity. The Regulation of the European Parliament and of the Council on population and housing censuses (Regulation (EC) No 763/2008) is focussed on output harmonisation rather than input harmonisation. Member States are free to assess for themselves how to conduct their 2011 censuses and which data sources, methods and technology should be applied given the national context. This gives the Member States flexibility, in line with the principles of subsidiarity and efficiency, and with the competences of the statistical institutes in the Member States. However, certain important conditions must be met in order to achieve the objective of comparability of census data from different Member States and to assess the data quality: Regulation (EC) No 1201/20092 contains definitions and technical specifications for the census topics (variables) and their breakdowns that are required to achieve Europe-wide comparability. The specifications are based closely on international recommendations and have been designed to provide the best possible information value. The census topics include geographic, demographic, economic and educational characteristics of persons, international and internal migration characteristics as well as household, family and housing characteristics. Regulation (EU) No 519/2010 requires the data outputs that Member States transmit to the Eurostat to comply with a defined programme of statistical data (tabulation) and with set rules concerning the replacement of statistical data. The content of the EU census programme serves major policy needs of the European Union. Regionally, there is a strong focus on the NUTS 2 level. The data requirements are adapted to the level of regional detail. The Regulation does not require transmission of any data that the Member States consider to be confidential. The statistical data must be completed by metadata that will facilitate interpretation of the numerical data, including country-specific definitions plus information on the data sources and on methodological issues. This is necessary in order to achieve the transparency that is a condition for valid interpretation of the data. Users of output-harmonised census data from the EU Member States need to have detailed information on the quality of the censuses and their results. Regulation (EU) No 1151/2010) therefore requires transmission of a quality report containing a systematic description of the data sources used for census purposes in the Member States and of the quality of the census results produced from these sources. A comparably structured quality report for all EU Member States will support the exchange of experience from the 2011 round and become a reference for future development of census methodology (EU legislation on the 2011 Population and Housing Censuses - Explanatory Notes ). In order to ensure proper transmission of the data and metadata and provide user-friendly access to this information, a common technical format is set for transmission for all Member States and for the Commission (Eurostat). The Regulation therefore requires the data to be transmitted in a harmonised structure and in the internationally established SDMX format from every Member State. In order to achieve this harmonised transmission, a new system has been developed – the CENSUS HUB. The Census Hub is a conceptually new system used for the dissemination of the 2011 Census. It is based on the concept of data sharing, where a group of partners (Eurostat on one hand and National Statistical Institutes on the other) agree to provide access to their data according to standard processes, formats and technologies. The Census Hub is a readily-accessible system that provided the following functions: • Data providers (the NSIs) can make data available directly from their systems through a querying system. In parallel, • Data users browse the hub to define a dataset of interest via the above structural metadata and retrieve the dataset from the NSIs. From the data management point of view, the hub is based on agreed hypercubes (data-sets in the form of multi-dimensional aggregations). The hypercubes are not sent to the central system. Instead the following process operates: 1. a user defines a dataset through the web interface of the central hub and requests it; 2. the central hub translates the user request in one or more queries and sends them to the related NSIs’ systems; 3. NSIs’ systems process the query and send the result to the central hub in a standard format; 4. the central hub puts together all the results sent by the NSI systems and presents them in a user-specified format.
    • 三月 2013
      来源: Eurostat
      上传者: Knoema
      访问日期: 24 十一月, 2013
      选择数据集
      Eurostat Dataset Id:demo_r_mpbdth The regional demographic statistics provides annual data on population, vital events (live births and deaths), total and land areas of the regions and key demographic indicators for regions and statistical regions at NUTS2 and NUTS3 levels for 35 countries: each EU-27 Member State, Acceding, Candidate and EFTA countries. The completeness of the tables depends on the availability of data received from the responsible national statistical institutes (NSIs).  The label of each table indicates the lowest NUTS level for which data are available; for the upper NUTS levels data are included as well. Starting with March 2013, demographic statistics at regional level reflect the new NUTS-2010 classification for EU-27 Member States and the new statistical regions for Croatia. Countries affected by the NUTS-2010 changes are expected to transmit to Eurostat the time series for the new regional breakdown. As a general approach, the regions with no data available are not listed in the tables. For a calendar year T, the deadline of the regional demographic data collection is 15 December, and data included have a different degree of detail for regions at NUTS2 and NUTS3 levels: NUTS2 level - high level of data detail:Population by sex and single year of age at 1st January: years T and T-1Live births by single year of age and year of birth of the mother: year T-1 Deaths by sex and single years of age and year of birth: year T-1  NUTS3 level - low level of data detail:Surface area in km2 at 1st January (total area including inland waters and land area): year TPopulation by sex and broad age groups at 1st January, namely for 0-14 (0 up to 14 years), 15-64 (15 up to 64 years) and 65+ (persons of 65 years and older): years T and T-1 Live births and deaths (total number of demographic events): year T-1  Tables are updated mainly during March of the next year (T+1), but also along the year whenever revised data are sent by the official data providers. Demographic indicators at regional level are computed by Eurostat using a harmonised methodology and common concepts for all regions of all countries, namely:average population on 1st January (in thousands), population density;demographic balance and crude rates (population change, natural change, net migration including statistical adjustments, crude birth rate, crude death rate, crude rate of population change, crude rate of natural change, crude rate of net migration (including statistical adjustments));age-specific-fertility rates and Total Fertility Rates;life tables that include age-specific-mortality-rates and life expectancy at given exact age;infant mortality and crude rate of infant mortality. At national level a larger number of demographic indicators are computed, as more detailed demographic data are collected only at this level. 
    • 三月 2014
      来源: Eurostat
      上传者: Knoema
      访问日期: 14 四月, 2014
      选择数据集
      Eurostat Dataset Id:demo_r_mpbsurv The regional demographic statistics provides annual data on population, vital events (live births and deaths), total and land areas of the regions and key demographic indicators for regions and statistical regions at NUTS2 and NUTS3 levels for 35 countries: each EU-27 Member State, Acceding, Candidate and EFTA countries. The completeness of the tables depends on the availability of data received from the responsible national statistical institutes (NSIs).  The label of each table indicates the lowest NUTS level for which data are available; for the upper NUTS levels data are included as well. Starting with March 2013, demographic statistics at regional level reflect the new NUTS-2010 classification for EU-27 Member States and the new statistical regions for Croatia. Countries affected by the NUTS-2010 changes are expected to transmit to Eurostat the time series for the new regional breakdown. As a general approach, the regions with no data available are not listed in the tables. For a calendar year T, the deadline of the regional demographic data collection is 15 December, and data included have a different degree of detail for regions at NUTS2 and NUTS3 levels: NUTS2 level - high level of data detail: Population by sex and single year of age at 1st January: years T and T-1Live births by single year of age and year of birth of the mother: year T-1 Deaths by sex and single years of age and year of birth: year T-1  NUTS3 level - low level of data detail: Surface area in km2 at 1st January (total area including inland waters and land area): year TPopulation by sex and broad age groups at 1st January, namely for 0-14 (0 up to 14 years), 15-64 (15 up to 64 years) and 65+ (persons of 65 years and older): years T and T-1 Live births and deaths (total number of demographic events): year T-1  Tables are updated mainly during March of the next year (T+1), but also along the year whenever revised data are sent by the official data providers. Demographic indicators at regional level are computed by Eurostat using a harmonised methodology and common concepts for all regions of all countries, namely: average population on 1st January (in thousands), population density;demographic balance and crude rates (population change, natural change, net migration including statistical adjustments, crude birth rate, crude death rate, crude rate of population change, crude rate of natural change, crude rate of net migration (including statistical adjustments));age-specific-fertility rates and Total Fertility Rates;life tables that include age-specific-mortality-rates and life expectancy at given exact age;infant mortality and crude rate of infant mortality. At national level a larger number of demographic indicators are computed, as more detailed demographic data are collected only at this level.Â
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 30 十月, 2019
      选择数据集
      Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements. Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics
    • 十月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 30 十月, 2019
      选择数据集
      Statistics on the production of cow's milk are derived from annual surveys of farms in each Member State. Milk production here includes milk subsequently fed to calves on the same farm, but not milk suckled directly.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 07 九月, 2019
      选择数据集
      This domain covers statistics and indicators on key aspects of the education systems across Europe. The data show entrants and enrolments in education levels, education personnel and the cost and type of resources dedicated to education. The standards on international statistics on education and training systems are set by the three international organisations jointly administering the annual UOE data collection: The United Nations Educational, Scientific, and Cultural Organisation Institute for Statistics (UNESCO-UIS),The Organisation for Economic Co-operation and Development (OECD) and,The Statistical Office of the European Union (EUROSTAT). The following topics are covered: Pupils and students – Enrolments and Entrants,Learning mobility,Education personnel,Education finance,Graduates,Language learning. Data and indicators disseminated include e.g. participation rates at different levels of education, shares of pupils and students by programme orientation (general/academic and vocational/professional) and in combined school and work-based programmes, enrolments in public and private institutions, tertiary education graduates, degree mobile students enrolled and graduates, pupil-teacher ratios, foreign language learning, expenditure on education per student and relative GDP.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 07 九月, 2019
      选择数据集
      This domain covers statistics and indicators on key aspects of the education systems across Europe. The data show entrants and enrolments in education levels, education personnel and the cost and type of resources dedicated to education. The standards on international statistics on education and training systems are set by the three international organisations jointly administering the annual UOE data collection: The United Nations Educational, Scientific, and Cultural Organisation Institute for Statistics (UNESCO-UIS),The Organisation for Economic Co-operation and Development (OECD) and,The Statistical Office of the European Union (EUROSTAT). The following topics are covered: Pupils and students – Enrolments and Entrants,Learning mobility,Education personnel,Education finance,Graduates,Language learning. Data and indicators disseminated include e.g. participation rates at different levels of education, shares of pupils and students by programme orientation (general/academic and vocational/professional) and in combined school and work-based programmes, enrolments in public and private institutions, tertiary education graduates, degree mobile students enrolled and graduates, pupil-teacher ratios, foreign language learning, expenditure on education per student and relative GDP etc.
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 16 七月, 2019
      选择数据集
      The aim of this section is to provide comparable statistics and indicators on education in the 27 Member States of the European Union, at the regional level NUTS 2. In order to facilitate comparison between countries, data from each Member State are allocated to the various education levels of the International Standard Classification of Education (ISCED), UNESCO 1997.
    • 九月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 08 九月, 2019
      选择数据集
      The aim of this section is to provide comparable statistics and indicators on education in the 27 Member States of the European Union, at the regional level NUTS 2. In order to facilitate comparison between countries, data from each Member State are allocated to the various education levels of the International Standard Classification of Education (ISCED), UNESCO 1997.
    • 十月 2018
      来源: Eurostat
      上传者: Knoema
      访问日期: 03 十一月, 2018
      选择数据集
      The aim of this section is to provide comparable statistics and indicators on education in the 27 Member States of the European Union, at the regional level NUTS 2. In order to facilitate comparison between countries, data from each Member State are allocated to the various education levels of the International Standard Classification of Education (ISCED), UNESCO 1997.
    • 十月 2018
      来源: Eurostat
      上传者: Knoema
      访问日期: 03 十一月, 2018
      选择数据集
      The aim of this section is to provide comparable statistics and indicators on education in the 27 Member States of the European Union, at the regional level NUTS 2. In order to facilitate comparison between countries, data from each Member State are allocated to the various education levels of the International Standard Classification of Education (ISCED), UNESCO 1997.
    • 七月 2019
      来源: Eurostat
      上传者: Knoema
      访问日期: 13 七月, 2019
      选择数据集
      The aim of this section is to provide comparable statistics and indicators on education in the 27 Member States of the European Union, at the regional level NUTS 2. In order to facilitate comparison between countries, data from each Member State are allocated to the various education levels of the International Standard Classification of Education (ISCED), UNESCO 1997.